• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.129-129
• /
• 2003

해양저질에서 휴면포자의 분포와 분포량에 대한 조사는 미래의 와편모조류 적조발생 시기나 장소를 예측할 수 있게 한다. 그러므로 저질내의 휴면포자를 찾고 분리하는 기술이 기본적으로 수행되어야 하며 지금까지 여러 방법이 개발되어 왔다. 이 연구의 목적은 기존의 휴면포자 계수방법들을 비교함으로써 연구의 효율을 제고 하고자 하는데 있다. 이 실험에서는 새만금 해역의 동일정점 저질내에 존재하는 휴면포자를 형광 염색하여 계수하는 Primuline 염색법, 해수, 휴면포자, sodium polytungstate의 비중차이를 이용하여 밀도구배원심법으로 분리하는 방법, 그리고 10% HCl로 탄산질을 제거하고 47% HF로 규산질을 제거한 뒤 휴면포자를 계수하는 고전적 계수방법 (palynological technique)을 사용하여 저질 내의 휴면포자를 분리 비교하였다. Primuline 염색법을 이용하였을 경우 Alexandrium famarense/catenella complex, Alexandrium sp. (spherical), Gonyaulax verior, Gonyaulax scrippsea, Gonyaulax spinifera complex등의 일부 종만 염색되어 관찰되었다. sodium polytungstate를 비중 1.3 g$cm^{-3}$으로 조정한 후 휴면포자를 분리한 밀도구배 원심법은 생물에 거의 무해한 것으로 알려져 있어서 발아가 가능해 휴면포자와 영양세포간의 관계를 규명할 수 있다는 장점이 있으나 계수에 있어서는 재현성이 떨어졌다. 반면 Palynological technique은 발아는 되지 않지만 석회질 벽을 가지는 휴면포자를 제외한 대부분의 종들이 관찰되었다. 이 결과는 실험 목적별로 휴면포자 계수방법을 달리 할 수 있음을 보여준다. 즉 발아실험을 할 경우에는 밀도구배원심법을, Alexandrium과 같은 특정종의 계수목적시에는 Primuline 염색법을, 정점 내 정확한 종 분포 파악을 위해서는 palynological technique을 사용하는 것이 효과적일 수 있다. 하지만 종분포 파악시에는 시간이 많이 소요되므로 좀더 신속하고 정확한 실험을 위해 분자생물학적인 기법들이 요구된다.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.55-57
• /
• 1971

Separation ratio was higher on the fxing soil than none fxing soil in the number of Nematodes.

• Nuclear industry
• /
• v.8 no.7 s.65
• /
• pp.90-92
• /
• 1988

일본에서는 금년도에 들어와 우라늄농축기술 개발이 활기를 띠고 있다. 동력로$\cdot$핵연료개발사업단이 '84년부터 건설한 원심분리법에 의한 우라늄농축원형플랜트가 4월 25일 본격적인 가동에 들어갔으며, 정부의 지원을 받아 욱화성이 연구개발을 추진해온 화학교환법에 의한 우라늄농축이 세계최초로 5월 16일 원자력발전소의 핵연료로 사용할 수 있는 $3\%$ 농축에 성공하였다. 다음은 일본의 우라늄농축기술 개발현황이다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.267-275
• /
• 2018

This study attempts to quantify amount of coacervate generated in a formulation of shampoo with three methods using optical transmission, suspension in a glass tube, and centrifugation. For the correct data acquisition, each method has been optimized to estimate the amount of coacervate with minimum standard deviation. To simply and quantitatively estimate amount of coacervate, two formulations of shampoo were employed as a large or small amount of coacervate generated. Comparisons of the two formulations in repetitive measurement elucidated that the methods by the centrifugation efficiently can be utilized to estimate the accurate amount of coacervate. Additionally, the amount of coacervate by the centrifugation does not exhibit the difference of patterns before and after drying in a shampoo formulation with different conditioning polymers, and this suggests that the centrifugation is a superior method to compare amount of coacervate in liquid.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.64-69
• /
• 1997

정격속도 100,000RPM용 원심분리기(centrifuge) 로터베어링계에 대해 회전체동역학 해석이 수행된다. 시스템은 원심분리기 로터, 유연축, 모터 로터와 축, 그리고 모터축 지지용 두 개의 구름베어링으로 구성된다. 설계목표는 정격속도가 위험속도(critical speed)에 대해 충분한 분리여유를 갖고, 위험속도에서 로터의 양호한 불균형응답특성을 이루어 내는 것이다. 후자의 요구조건은, 시스템이 다수의 위험속도를 통과하며 정격속도 주위에서 충분한 분리 여유를 갖지 않을 수도 있기 때문에 특히 중요하다. 시스템에 초유연축(extra-flexible shaft)을 도입함으로써, 비록 1차 위험속도에서 만족스럽지 못한 큰 불균형응답을 가질지라도 고차 위험속도에서 만족스런 작은 불균형응답을 보인다. 1차 위험속도에서 로터의 큰 변위를 억제하기 위해서 범퍼링(bumper ring) 또는 안내베어링(guide bearing)을 유연축의 적절한 위치에 설치할 필요가 있다. 비록 유연축계라 할지라도 정격속도와 가까운 4차 이상의 고차 위험속도를 정확히 규명하기 위해서는 모터의 동역학을 전체시스템에 결합하여야 함을 볼 수 있다. 해석은 유한요소법(finite element method)에 의해 수행된다.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.347-355
• /
• 2007

The aim of this study was to evaluate the differences of salivary lead (Pb) and cadmium (Cd) concentrations, using ASV analysis, after various pre-treatment procedures. 10 unstimulated whole saliva samples of non-exposed subjects to Pb and Cd were collected. Each sample was divided into 6 aliquots and centrifugation was performed in only 3 aliquots. After centrifugation, 3 different types of pre-treatment procedures were carried out. Also, these pre-treatment procedures were carried out for another 3 aliquots, without centrifugation. Pre-treated aliquots were analyzed electrochemically, by ASV. The results are as follows: 1. Mean concentration of Pb in saliva after centrifugation was significantly higher than that of non-centrifugation. 2. In the detection sensitivity of Pb in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were significantly higher than that of simple dilution technique by electrolyte. 3. Mean concentration of Cd in saliva after centrifugation was significantly higher than that of non-centrifugation. 4. In the detection sensitivity of Cd in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were higher than that of simple dilution technique by electrolyte. But, there were no significant differences between them.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2012

This paper explained about the sludge recycling system which retrieved the silicon and abrasive from solar cell wafer slicing. The basic process of the recycling system was multiple centrifuge and secondary processes of ultra sonic agitation, addition of alcohol-water solution and heating sludge was added for raising separation efficiency. The recycling rate was about 96% and 94% for 2N, 4N silicon respectively. The SiC abrasive recycling rate was about 80%. To retrieve the high purity of 4N silicon, the heat process in vacuum furnace was added to remove remaining impurity components.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.41.1-41
• /
• 2002

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.636-641
• /
• 2002

Optimum extraction condition and clarification process were investigated to manufacture liquid extract tea using Phellinus linteus. Carbohydrates content in the raw Phellinus linteus was 80.9%. Major minerals were K, Ca, Fe and Na, but vitamin B$_1$, B$_2$, and C were not detected. The best extraction condition was 5% raw material at 10$0^{\circ}C$ within 3 hr. To clarify the extract, three methods of filtration with depth filter pad, centrifugation and addition of several filter aids were studied. Filtration with depth filter pad and centrifugation were highly effective on the clarification and the changes in the turbidity for 7 weeks at 4$0^{\circ}C$ were not occurred. The optimum clarification condition was centrifugation above 6,000 rpm or filtration with 8 ${\mu}{\textrm}{m}$ depth filter pad.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.67-73
• /
• 1999

It is practically hard to prepare good TEM specimens from powders which are embedded in epoxy materials for ion milling, because the milling rate difference between powders and epoxy is quite large. In order to overcome this problem, we tried to find methods to increase the density of powders in the embedding epoxy without loosing the adhesive strength between them. Powder density was considerably increased by employing a centrifuge for embedding, compared to the result by a conventional vacuum embedding. In addition, mixing powders of different sizes after sieving also enhanced the final density by allowing smaller particles filling in the gaps of larger particles. Ion milling of powders embedded by these methods resulted in thin specimens good enough for normal TEM works. TEM specimens from spherical, platy and fibrous powders of submicron size were successfully prepared by this centrifuging method.