• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.101-114
• /
• 2009

Potsherds and kilns of the AD 3th century excavated from Gundong and Majeon sites, Korea were studied to investigate the production techniques and provenance of potsherds and kilns on the pastes. For potsherds, kilns blocks and in-situ paleo-soils, provenance of raw materials were estimated through mineralogy and geochemistry, while production technique and thermal feature of kilns were investigated through observation of textures and compositions as well as firing experiment on paleo-soils. As a result of study, potsherds and kilns were found to have similar mineralogical compositions as the neighboring paleo-soils and to have same evolution path with that of geochemistry. The potsherds were divided into 3 groups according to firing temperature and production technique. Group 1 consists of reddish stamped pattern pottery with loose textures, which has many pores and contains many iron oxides. Its temper is less than about 0.5mm, and was probably fired between 700 to $800^{\circ}C$. Group 2 contains ash to grayish blue stamped pattern pottery, which has vitrified texture and few pores. Its temper is less than about 0.5mm, and was probably fired from 900 to $1,000^{\circ}C$. However, some potsherd belongs to the group 2 in terms of features for temper and pastes, but it was probably fired over $1,100^{\circ}C$. Group 3 contains reddish and grayish stamped pattern pottery. It has vitrified matrix, few pores and temper consists of polycrystalline quartz and feldspar over 2mm, and it was probably fired around $1,000^{\circ}C$. The kiln had experienced temperature from 600 to $700^{\circ}C$ on the wall, from 900 to $1,000^{\circ}C$ on the bottom, suggesting the function of high temperature firing.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.77-89
• /
• 2021

In this study, materials and color formation techniques were assessed for black potteries excavated from the Janghyeon-dong, Jungsan-dong and Gyodong-ri sites during the Proto-Three Kingdoms period in Ulsan, Korea. Although the black potteries were black superficially, the inner cores were either black or reddish yellow. Microscopy analysis identified that body clay was used for reddish iron oxide rich soils with quartz, alkali feldspar and mica, along with grains of myrmechite texture. Additionally, as marginal differences exist in the contents of SiO₂, Fe₂O₃ and CaO, the composition of the host rock and clay distributed around the sites was affected. Thus, we can deduce that pottery was made by soiling at a short distance. Raman spectroscopy results revealed that the black layer of the black pottery was used as amorphous combustion carbon. In addition, as a transparent layer of brown lacquer was observed on the substrate that was in contact with the surface layer, the black layer of the pottery induced black color development by a combination of combustion carbon and lacquer. Based on the mineral composition and microtexture of the body clay, the firing temperature of the potteries seemed to range from 750 to 850℃, whereas the lacquer layer was pyrolyzed at 468℃ by thermal analysis. Therefore, a combined layer of combustion carbon and lacquer, which formed the black color, was painted after the body clay was fired.

• KOMUNHWA
• /
• no.62
• /
• pp.29-58
• /
• 2003

It has been well known that the function of the furnace is to cook, to heat, and to light. Especially, it is easy to grasp relations between the furnace forms and the dwelling structure because the furnace was a part of the most important housing culture.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.369-377
• /
• 2018

In order to examine the constituents and weathered state of a lacquer specimen, analysis of the organic materials was conducted using py/GC/MS(pyrolysis-gas chromatography-mass spectrometry). The samples were obtained from the lacquered wooden sheath of a long ring-pommel sword excavated in the Imdang No.1 ancient tomb constructed around the Proto-Three Kingdoms period. In direct py/GC/MS, the sample and the dried Asian lacquer showed similar chromatograms, while the characteristic compounds of Asian lacquer such as 1,2-dimethoxy-3-pentadecylbenzene were observed in THM(thermally assisted hydrolysis and methylation)-py/GC/MS. In addition, compounds like dimethyl nonanedioate, which presumably originated from drying oil, were also detected. Furthermore, the detection of oxidized catechols in considerable amount indicated that the degradation of lacquer is estimated to result from the oxidation of urushiol. Therefore, it is suggested that the lacquered wooden sheath was prepared using Asian lacquer and drying oil, and that the lacquer layer was considerably oxidized over the long burial time.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.99-111
• /
• 2012

The purpose of this study is to identify the change of geographical (or geomorphological) location environment of the dwelling site and its cause in Daejon Basin during transition from the Bronze Age to the Proto Three Kingdoms Period. In order to achieve this goal, it was divided into (1) 'comparison of the total number of dwelling sites of a group of remains (or high-density dwelling remains)' and (2) 'comparison of the total number of dwelling sites in certain remains including locations of dwelling of two periods' and location environment was compared to each other in aspects of altitude, gradient, 'distance from the river of water available for use' and 'the difference between the highest altitude and lowest altitude of river bed of water available for use' based on change of period. The results were as follows: 1. looking at a change of individual factors, the altitude was elevated and the gradient was increased. The distance from the river of water available for use was decreased or increased in case of 'small scale river' and it was very little difference or increased in case of 'medium scale river'. The difference between the highest altitude and lowest altitude of river bed of water available for use was increased in case of 'small scale river' and it was increased or decreased in case of 'medium scale river'. If comparing the individual factors to each other, the increase and decrease of altitude, gradient and the difference between the highest altitude and lowest altitude of river bed of water available for use have the similar pattern. Especially, it was shown that the increase of gradient affected the increase of altitude and the difference between the highest altitude and lowest altitude of river bed of water available for use. In addition, it was shown that the increase and decrease of distance from the river of water available for use had the different pattern from those of altitude, gradient and 'the difference between the highest altitude and lowest altitude of river bed of water available for use'. 3. With above results, it was thought that combination of micro landform characteristics (eg. Characteristics of gradient) of low hills distributed within Daejeon Basin and rich aquatic environment surrounding the low hills affected the selection of location of dwelling sites at the time. Especially, it was shown that 'gradient and distance from the river of water available for use' were relatively more important factors for the inhabitants at the time to select the location of dwelling sites compared to 'altitude and difference between the highest altitude and lowest altitude of river bed of water available for use' upon selecting the location of dwelling.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.168-183
• /
• 2020

Efforts had been made to eliminate the brittleness unique to cast ironware from 5 BC up until the time that cast ironware became widely used. One of the techniques used to this end was to produce the cast ironware in one kiln and then anneal it in another kiln. This technique condensed or removed the carbon in the structure to eliminate the brittleness of cast ironware and enable forging. To clarify the nature of this technique, this study examined cast ironware made of malleable cast iron, which manifests the characteristics of the annealing technique for cast ironware excavated on the Korean peninsula, based on current steelmaking technology and research results from China and Japan. Results confirmed that all cast ironware made of malleable cast iron had been imported into Korea until the Proto-Three Kingdoms Period. Also, since the Chiljido (Seven-Branched Sword), which is housed at the Ishigami Shrine in Japan, appears to have been produced in the Korean peninsula, it is determined that Baekje in the 4^th century must have possessed such an annealing technique. At that time, however, iron was produced mainly with an iron bloom, and a large amount of forged iron was produced with a steel bloom smelted from an iron bloom. In addition, most of the cast ironware that was used previously, except for cast iron hoes, had been replaced by forged ironware. In other words, this annealing technique was not used frequently until the Three Kingdoms Period. However, it spread broadly during the Unified Silla Period in so much as it was identified in the Jangan-ri remains, which represented the regional hub of iron production and distribution.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.41-56
• /
• 2012

The purpose of this study is to look into the location environment of prehistoric and ancient remains (hereinafter referred as remains) in Daejeon Area. For the purpose of this, out of remains reported in investigation areas so far with the object of remains (total 22 places) of New Stone Age -Proto Three Kingdom period, geographical and Geomorphological analysis was conducted. The results are like the following. Most of the remains are distributed over hills especially flat surface - semi-gentle slope of hills. The bed rocks of the remains (21 places, about 95%) are composed of double-mica granite. The remains (19 places, 86%) retain 'the 1st-2nd small scale river and '5th or higher medium scale river'within comparatively short distance at the same time. The average altitude of remains is 71m and most remains are located over the altitude of 50 - 90m. The average gradient of hillslop where the remains are located is $6.7^{\circ}$ and the remains (15 places, 71%) are located over the gradient of about $0-15^{\circ}$. And the tendency that the higher the gradient of remains the smaller the number of remains was confirmed. From the above, it is judged that the inhabitants who lived in Daejeon Area at that time preferred hills with comparatively not high altitude and the earth's surface of low gradient and in addition they recognized water (river) as being important when they selected the location of settlement (or dwelling sites group).

• Korean Journal of Heritage: History & Science
• /
• v.49 no.4
• /
• pp.114-125
• /
• 2016

Lacquer is one of the most widely used natural resin in East Asia since Neolithic Age. As a major ingredient of lacquerware, lacquer is waterproof, insect-proof and rot-proof to be durable and anti-abrasion, generally utilized for mainly painting purpose. According to lacquerware excavated from several sites of Japan and China, lacquerware seems to appear in Neolithic Age. On the other hand in case of excavation research in Korea, lacquerwares are found after the Bronze Age. The initial purpose of lacquer is estimated to be adhesive, regarding the literatures mentioning bitumen(Yeoksceong ), animal glue(Kyeo) and egg alumen(Nanbaek). Especially piece of jar coffin unearthed in Pyeongtaek Daechu-ri site had trace of restoration by lacquer and hemp as an evidence of lacquer for adhesion in Pre-Three Kingdoms period. Since then a trend to restore the broken ceramics with lacquer and decorate with golden foil lasted especially in Joseon Dynasty. In the field of gold plated lacquer method, mother-of-pearl inlaying technique for lacquerware and restoration of buildings, lacquer is still used as adhesive. Due to matter of reversibility lacquer is being avoided for conservation and restoration of cultural heritage. Lacquer as a traditional material for adhesive since ancient times, however, has advantage in adhesion strength and durability. Because synthetic resin adhesive has problem of emission of volatile organic compounds and aging over time, lacquer receives attention recently. On the contrary, by combination adhesive from mixing lacquer and animal glue, already proved the possibility of applicability and chemical modification. A research to utilize lacquer as modern paint or functional material is also conducted continuously also in China and Japan. To put traditional material into practical use and modernize, chemical research from the molecular level of the lacquer is necessary in the near future.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.4-21
• /
• 2021

A stone mold from the Sabi period of Baekje was excavated at the western tombs in Neungsan-ri, Buyeo where there was a recent excavation survey (2016). It was believed and reported that such stone molds were used for copper needles during the early Iron Age; however, a close re-examination of the form revealed that they were used for bifid ornamental hairpins. Given its casting form, the stone mold of Neungsan-ri is estimated to have been used to make bifid ornamental hairpins in a ∩ shape, narrowing down toward the tip. It is considered an artifact of the Goryeo dynasty. The stone used to make the bifid ornamental hairpin mold of Neungsan-ri was chlorite-schist, the principal minerals of which include chlorite, amphibole, and talc. Similar rocks are in nearby Buyeo (Oesan-myeon), Cheongyang, Gongju, and Yesan. They are mainly found between Jiseon-ri, Oesan-myeon, Buyeo, Sucheol-ri, Yesane-up, and Yesan. Nearly 70 bifid ornamental hairpins from the Goryeo dynasty were excavated at Neungsan-ri, Buyeo and the surrounding areas. Among them, the bronze ones excavated from the tombs of Songguk-ri, Buyeo are estimated to have been made using this mold as they closely resemble the Neungsan-ri mold. Stone was likely the preferred material for molds to make bronze artifacts as it was easy to sink a die. Regarding the bifid ornamental hairpin cast excavated in Neungsan-ri, they obtained stones in nearby areas 20~50km from their location, made bronze artifacts, and distributed them to nearby sites during the Goryeo dynasty. These artifacts suggest that the casting technology of using a stone mold was still employed then.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.174-197
• /
• 2024

Personal ornaments made from precious metals that have been excavated from tombs dating to the Maripgan period (4th-6th century) of the Silla Kingdom are a major subject of analysis in the study of gender and hierarchy among the tomb occupants. Nonetheless, bracelets had been neglected until Ha Daeryong's recent research on determining gender through bracelets attracted attention. Accordingly, an examination and organization of the fundamental elements of Silla bracelets was needed. In response, this paper examines their physical characteristics, appearance, changes over time, and related wearing practices. The data for this study is derived from 176 bracelets, mostly made from silver or gold. Copper and glass bracelets are also included. Many of them were cast in a single-use earthen mold. Even the notched and protruding designs were created by casting rather than carving. Glass bracelets and bracelets with dragon designs were made using molds with round cavities. Excluding those produced using metal sheets, the rest of the bracelets are thought to have been cast in a mold with a long-string-shaped cavity and then bent round. After being bent, the two ends were either soldered together (closed type) or left open (open type). As demonstrated in the study by Lee Hansang, Silla bracelets evolved from plain rounded rod-shaped bracelets, such as the one excavated from the Northern Mound of Hwangnamdaechong Tomb, to versions with notched designs, and eventually to those with protruding designs, which gained popularity by the sixth century. The precedents of plain rounded rod-shaped bracelets are presumed to have been thin rod-shaped bracelets from the Proto-Three Kingdoms period. Bracelets need to be fit to the wrists so that they do not slip off easily when worn. The open type design was the preferable way to achieve this. Moreover, given the ductility of gold, silver, and copper, it seems that it would have been possible to stretch or deform them. In the end, I concluded that even if a bracelet is too small to pass man's hand, the open type could have been worn. Furthermore, if a closed-type bracelet were pressed into an oval shape, it would not be impossible for a man to put it on. When bracelets are divided according to their degree of deformability into type A (the open type) through type D, which is almost impossible to deform, type A is commonly found with wearers of thin hollow earrings, and types C and D (which are difficult to deform) are not found with wearers of thin hollow earrings, but only with wearers of thick hollow earrings. Therefore, it can be seen that men were allowed to wear bracelets, and the existing studies that differentiate between men and women based on the wearing of thin hollow earrings, thick hollow earrings, and swords remain valid.