• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.174-175
• /
• 2021

선박 원격제어를 위해서는 원격 제어자가 선박의 운항상태를 파악하고 필요한 제어 명령을 원격으로 내릴 수 있어야 한다. 연구 목적은 선박 원격제어를 위해 교환되는 데이터를 효율적으로 처리하는 시스템을 개발하기 위함이다. 연구 방법은, 선박 운항상태 파악과 제어 명령 전달에 필요한 시스템을 분야별로 구성하고 해당 시스템을 활용하여 선박을 운항하면서 단위시스템별 활용성을 분석하였다. 이를 위하여 선박 운항 시뮬레이터와 네트워크로 연결하여 실제 선박을 대체하여 활용하였다. 연구결과, 육상제어시스템-선박 간 네트워크를 통하여 교환되는 데이터의 통신방식은 상황에 따라 달라져야 한다는 결과를 도출하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.546-552
• /
• 2020

The remote control system, in which the remote control server and the actuator are connected and operated through a wireless network, has a great potential risk as well as its convenience. The control commands can be lost because of unreliable wireless channels. The intelligent remote control system is a system that adds a function to infer a control command to the actuator to operate even if the control command is not received. In this paper, we implemented an intelligent remote control system testbed and confirmed the problems that could occur in the remote control system through experiments and verified that the intelligent remote control system solves the problem. The intelligent remote control system can achieve the performance that can be achieved when general remote control system has high communication overhead with less communication overhead.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2134-2142
• /
• 2010

IR remote control is the most common way to control home appliances nowadays. Each legacy device is controlled with their own remote controller, and it is not standardized yet. Although it is possible to handle multiple devices with a integrated remote controller, not all the devices and command sets are supported. There are also limitations in expandability especially when new or special command sets are required. In this paper, a efficient zigbee bridge which transforms a command set sent via zigbee to IR comment set is developed. The bridge also has a learning function based on a header comparison method. When a new command is sent, the bridge learn the new code. When a existing code is sent, the bridge dispatches applicable IR command to the appliance. With this approach, it is possible to obtain expandability and flexibility for new commands, and increase the communication efficiency up to 56.8 times.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.170-176
• /
• 2004

In this study, the relay driver circuit which controls the spacecraft configuration change are implemented and validated. First of all, the specification of the relay driver circuit is defined, and then its circuit meeting the specification defined is designed. In order to verify the design of the relay driver circuit, its circuit was simulated, and then it's confirmed that the relay pulse current and voltage level defined in the specification are obtained, and the results obtained through the functional test of the relay driver circuit are compared and well matched with the simulation results. Also the worst case analysis for confirming the stable operation of the relay driver circuit under the tolerance of each component is performed.

• Journal of Korea Game Society
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2007

In this paper, a game control system was constructed, in which a game was controlled by a remote joystick connected with a power line by the power line communication (PLC) method. The structure of the system was that the connection line between the remote joystick and a PC, and the PC and an audio play device was the home power line. And, the communication data rate between them was 2400 bps. The Polling communication technique was used for the PC to read the joystick's control commands, and to send some acoustic informations to the receiver PLC device. A game was programmed, in which an aircraft was moved according to the joystick's left, right, up, and, down direction, and was shooting its missile after the joystick's shooting button was pushed. The communication delay of about 100 msec between them didn't cause any big problem in playing the game.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.114-121
• /
• 2004

Thermal design changes and analysis on the engineering model of Command Telemetry Unit(CTU) for a geostationary communications satellite arc performed for the purpose of developing an engineering qualification model. A thermal model is developed by using power consumption measurement values of each functional board and thermal cycling test results. In modeling heat dissipated EEE parts, heat dissipation is imposed evenly on the EEE part footprint area which is projected to the printed circuit board. All the EEE parts of CTU meet the requirement of their allowable temperature range when placed on the engineering qualification level of thermal vacuum environments in accordance with the proposed thermal design changes.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.99-109
• /
• 2011

This paper presents implementation details of home appliance control system using personal communicator based on LN2440 single board computer, which recognizes hand-gesture of user, controls remote moving device such as mobile home server, robot etc. through delivery of proper control commands. Also, this paper includes details of design and implementation of home gateway and mobile home server. The implemented prototype can be utilized to develop various remote control system including a remote exploration robot, intelligent wheelchair based on general purpose embedded system.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.430-437
• /
• 1999

In this paper, client/server model for remote conveyor control and monitoring system Is designed and implemented to simulate the product line of vehicles. The client system located at the monitoring office is using a web applet based system, and sends some commands to the server system which guards and controls the conveyer system. The commands is delivered to the server system, the driver software existing in the server controls the conveyer system directly.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.88-90
• /
• 2023

선박 원격제어신호를 실제 선박에 적용하려면 대상 선박마다 연결가능한 형태가 되어야 한다. 따라서, 제어신호 수신부와 액추에이터와 연결되는 인터페이스부로 나누어, 원격제어신호 수신시 신호를 변환하는 컨버터와 그 신호가 표현될 수 있는 모델 디스플레이부를 개발하였으며, 다양한 실선 환경에 연동할 수 있도록 인터페이스 방식을 연구하였다. 또한, 선박 원격제어시 명령이 송신되는 시점과 응답이 수신되는 시점이 가시적으로 표시 되도록 하여, 원격 제어자가 직관적으로 제어상태를 파악할 수 있도록 하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.52-56
• /
• 1998

본 연구에서는 클라이언트/서버 형태로 승용차 조립라인을 시뮬레이션한 컨베이어 시스템을 원격으로 제어하는 시스템을 설계하고 구현하였다. 클라이언트 시스템은 상황실에 위치하여 웹애플릿을 통하여 승용차 조립라인의 생산 현장을 영상 감시하고 필요시 제어 프로그램을 장착한 서버에게 컨베이어 제어 명령을 내린다. 또한 서버시스템에서 컨베이어 시스템을 통과하는 생산품 내역에 대한 데이터베이스 시스템을 유지 관리한다.