• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.230-237
• /
• 2008

Recently, lots of interest and competition in developments related to the autonomous-vehicle robot are being further increased. However, the absence of the standard architectures for effectively controlling the autonomous-vehicle robot led to many difficulties such as the long duration of development and the uncompatibility with other autonomous-vehicle robots. Accordingly, we implemented a mobile autonomous-vehicle robot system based on JAUS standard architecture. The mobile robot communicates with the remote-control system by using wireless LAN UDP/IP JAUS command massages. Its effectiveness is showed through the experimental results related to the navigation of implemented robot.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.449-452
• /
• 2012

본 논문에서는 인간이 환경에 대한 상황을 직접적으로 파악할 수 있는 시각 정보를 제공하기 위해 다중 카메라를 이용한 사용자 시각기반 어라운드 뷰를 개발하였다. 4대의 하향식 경사 카메라를 통하여 영상을 획득하고 켈리브레이션한다. 렌즈의 왜곡을 보정하고 호모그라피 행렬을 계산하여 지표면과 수평이 되는 관점으로 영상을 변환한다. 그 결과 사용자에게 종합적 상황정보 획득이 용이하도록 정보화하기 위한 위성 영상 관점의 정보를 획득할 수 있다. 그리고 4대의 카메라를 동시에 사용하기 위한 하드웨어적 한계를 극복하고자 영상처리가 가능한 임베디드 카메라 모듈을 개발하였다. 사용자-로봇 상호작용을 위해 버튼 및 조이스틱과 같은 기계적 입력장치를 사용하지 않고 사용자의 자연스러운 제스처를 통하여 제어 명령을 입력할 수 있는 터치 패드를 사용하여 사용자 인터페이스를 구축하였다. 개발한 시스템은 시 공간적 한계를 극복하고 원격에서 로봇의 상황정보를 획득하여 사용자 친화적인 로봇제어를 할 수 있다. 위의 내용들을 검증하기 위하여 같은 상황 환경에서의 기존의 시스템과 비교 실험을 진행하였고 실험 결과를 통하여 제안한 시스템의 효용성을 검증하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.160-168
• /
• 2000

In this paper, we study how the remote controllable mobile robot which could come to many via points with FLC(Fuzzy Logic Control) efficiently. The fabricated robot stop after the movement of single path method by four kinds of commands (forward, backward, turn left, turn right). To reduce disadvantages of this driving type, this paper reduce via points to goal position base on map which get from senor, let robot drive via point to via point on optimized path. An algorithm for the avoidance of unexpected obstacles by FLC is developed. And these algorithms are confirmed by computer simulations

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1533-1536
• /
• 2004

위성의 비행소프트웨어는 위성이 주어진 임무를 수행할 수 있도록 위성을 제어하는 것으로 지상으로부터의 원격 명령을 받아 처리하고 원격측정 데이터를 지상으로 송신하는 기능과 자세 결정 및 제어, 전력 제어, 열 제어, 탑재체 관리 등의 기능을 수행한다. 본 논문은 다목적실용위성 2호의 비행소프트웨어에서 원격측정 데이터를 저장하고 지상으로 전송하는 기능을 수행하는 MMD (Mass Memory and Downlink Management) 소프트웨어의 설계 및 구현 내용과 시험절차, 방법, 시험결과 등에 대해서 서술하였다.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.41-47
• /
• 2007

The first geostationary satellite made by Korea, COMS, has the three different payload ; Meteorological sensor, Oceanographic sensor and Ka-band communication payload. There are Meteorological & Ocean Data Communication Subsystem(MODCS) and Telemetry, Command and Ranging Subsystem(TC&R) as other RF radiation sources. MODCS transmits and receives Meteo and Ocean measurement data from/to earth using L-band and TC&R using S-band. The Ka-band communication payload will provide high-speed multimedia services and communication services for natural disaster such as prediction, prevention, and recovery services in the government communications network.Ka-band beacon is for the earth antenna pointing and the experiment of rain fading. This paper gives the analysis results about the mutual radiation effect on Ka-band communication payload, Ka-band beacon, MODCS and TC&R. Up/Down link power and coupling factor including the geometrical position and distance of antenna, filter rejection and degradation factor due to the different polarization are considered. The results show MODCS and TC&R are compatible for Ka-band communication payload and Ka-band beacon does not interfere with MODCS and TC&R normal operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.362-369
• /
• 2014

A railway SCADA system is a control systems that provide the trains with the electricity. A railway SCADA system sends commands to the RTUs(remote terminal unit) and then it gathers status information of the field devices in the RTUs or controls field devices connected with the RTUs. The RTU can controls input output modules directly, gathers the status information of the field devices connected with it, and send the information to the control center. In this way, a railway SCADA system monitors and controls the electricity power for running trains. The cyber attackers may use some vulnerabilities in the railway SCADA system software to attack critical infrastructures. The vulnerabilities might be created in the railway software development process. Therefore it need to detect and remove the vulnerabilities in the control system. In this paper we propose a new control protocol fuzzing method to detect the vulnerabilities in the DNP3 protocol based application running on VxWorks in RTU(Remote Terminal Unit) that is a component of the centralized traffic control system for railway. Debug-channel based fuzzing method is required to obtain process status information from the VxWorks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.445-450
• /
• 2011

In this paper, we describe the implementation of an wireless sensor network testbed. We developed a web-based sensor network gateway and enhanced the Surge program which is used for sending and routing of packets in the sensor field. The developed program can transmit the source data of sensor nodes to the sink node via multi-hop routing, and deliver user commands to actuate sensor related equipments. Moreover, in this testbed, the data transport path from a node to the sink can be monitored. Thus we can approximate the network topology and the relative positions of sensor nodes. We also describe an application of the testbed that is used for controlling a remote robot.

• The KIPS Transactions:PartA
• /
• v.12A no.7 s.97
• /
• pp.583-588
• /
• 2005

To develop SoC program for embedded systems, a tool that can remotely debug from host system is needed. Because the existing remote debugging systems using GDB don't offer information of the SoC program execution in real-time, it is difficult to observe condition of the program execution, and also they have limited characteristics to tools and use costly adaptors. In this paper, a real-time tracking tool that can record SoC status on the nv each execution of the assigned instructions is introduced and an economical USB-JTAG adaptor is proposed. And it is shown that this tool can track the execution of a composed program in the target system based on PXA255 processor.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.33-40
• /
• 2015

This paper presents the design and implementation of the educational remote controlled robot system including remote sensing in the embedded environment. The design of sensing information processing, software design and template design mechanism for the programming practice are introduced. LPC1769 using Cortex-M3 core as CPU, LPCXPRESSO as debugging environment, C language as firmware development language and FreeRTOS as OS are used in development environment. The control command is received via RF communication by the server and the robot system which is operated by driving the various sensors. The educational procedure is from robot demo operation program as hands-on practice and then compiling, loading of the basic robot operation program, already supplied. Thereafter the verification is checked by using the basic robot operation to allow demo operation such as hands-on-training procedure. The original protocol is designed via RF communication between server and robot system, and the satisfied performance result is presented by analyzing the robot sensing data processing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1142-1155
• /
• 2014

The classical PCM/PSK/PM scheme has been commonly used for TC & R applications between satellites and ground stations in the S-band. We analyzed TC & R link performance between ground station and the geostationary satellite which employs PCM/PSK/PM, when the satellite are particularly on the Super Synchronous Transfer Orbit(SSTO). The satellite parameters on SSTO are assumed to be those operating on the geostationary orbit, considering heritage aspect. In the uplink, the results shown indicate that sufficient margins over 3 dB are obtained when the EIRP of ground station is greater than 65 dBW. The down link performance is of great interest. By adjusting the telemetry modulation index and ranging modulation index, we could obtain the required margin of 3.0 dB in the down link, and find out the minimum G/T of ground station. In conclusion, the previously operated ground stations during LEOP at COMS launch, can be operational when GEO injection is made using SSTO(65,000 km and 70,000 km).