• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.47-54
• /
• 2009

This research is about the inherent optical properties(IOPs) of algae which is collected from Nam-Hae for basic research of red tide remote sensing technique development. 21 kinds of red tide organisms were cultivated to investigate IOPs of them in the level of laboratory, and specific absorption coefficient of phytoplankton($a^*$) and backscattering coefficient of phytoplankton(${b_b}^*$) are estimated by using spectrophotometer. Absorption spectrums according to species appeared to range from 0.005 to 0.06 ($m^2{\cdot}mg^{-1}$), and the shapes of spectrums were also different. The range of ${b_b}^*$ appeared to be $10^{-2}{\sim}10^{-4}\;m^2{\cdot}mg^{-1}$, which had about 100 times differences between species, and the shape of spectrum have significant difference between species. These results will input as a remote sensing reflectance model input parameter from ocean color.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.55-58
• /
• 2006

차세대 방송서비스 개발의 일환으로 관심을 모으고 있는 다시점 비디오 부호화(multi-view video coding, MVC) 방식은 인접한 여러 대의 카메라로 동시에 획득한 영상을 효과적으로 압축하는데 그 목적이 있다. 이때, 중간시전 영상을 생성하여 부호화하는 과정의 참조영상으로 이용할 수 있으며, 이를 위해서는 다시점 비디오 특성에 맞는 영상보간 방법이 필요하다. 기존에 제안되었던 영상보간법은 변위의 검색범위를 초기에 설정하여 블록정합을 이용하여 화소 단위로 변위를 측정하기 때문에 카메라 사이의 거리가 크거나 객체의 움직임이 커서 변위의 변동이 심한 영상에서는 안정적인 화질의 영상을 얻기 어렵다. 또한, 고정된 크기의 블록을 이용하여 전체 변위를 측정하므로 객체의 변위차가 큰 영역에서 변위 오류가 많이 발생한다. 본 논문에서는 이와 같은 문제를 해결하여 보다 개선된 화질의 중간시점 영상을 얻기 위한 새로운 영상보간법을 제안한다. 영역분할을 이용한 초기의 변위측정 과정에서, 처음부터 최대 변위의 범위를 설정하는 대신에 블록 단위로 대략적인 변위륵 측정한 후에, 가변 블록을 이용하여 보다 세밀한 변위를 측정한다. 이 방법은 변위차가 큰 객체의 경계 부분에서 보다 정확하게 변위를 측정 할 수 있으므로, 화소 단위로 변위를 측정할 때 이전에 추한 변위 정보를 바탕으로 각 화소별로 검색 범위를 설정한다. 적응적으로 설정된 검색 범위를 이용하여 화소 단위의 변위를 측정하면 보다 개선된 변위를 얻을 수 있다. 추가적으로, 변위측정 과정에서 발생하는 변위의 오류를 최대한 줄이기 위해 각 단계별로 미디언 필터를 이용하여 변위 오류를 수정하였다. 본 논문에서 제안한 방법으로 실험한 결과 기존의 영상보간 방법보다 화질이 약 $1{\sim}4dB$ 정도 개선되었다.필, 투명도 등을 위성원격탐사 자료와 GIS를 이용하여 공간분석을 실시하고, 공간분포도를 작성함으로써 대상해역의 해양환경을 파악하였다. 본 연구결과, 분석된 위성자료가 현장조사에 의한 검증이 이루어지지 않을 경우, 영상자료분석을 통한 표층수온 추출은 대기 중의 수증기와 에어로졸에 의한 계산치의 오차가 반영되기 때문에 실측치 보다 낮게 평가 될 수 있으므로, 반드시 이에 대한 검증이 필요함을 알 수 있었다. 현지관측에 비해 막대한 비용과 시간을 절약할 수 있는 위성영상해석방법을 이용한 방법은 해양수질파악이 가능할 것으로 판단되며, GIS를 이용하여 다양하고 복잡한 자료를 데이터베이스화함으로써 가시화하고, 이를 기초로 공간분석을 실시함으로써 환경요소별 공간분포에 대한 파악을 통해 수치모형실험을 이용한 각종 환경영향의 평가 및 예측을 위한 기초자료로 이용이 가능할 것으로 사료된다.염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.333-341
• /
• 2002

This article is written to make a foundation for effective radio network engineering by enabling the accurate traffic assumption between Base Station (BTS : Base Station Transceiver Subsystem) md Repeater through the scientific and systematic analysis of mobile traffic dealt within CDMA Base Station. Among these, Repeater, having direct physical connection with BTS, simply does the remote relay function but the volume of the traffic flowed into the repeater is not accountable. The total BTS traffic is the sum of traffic dealt by the BTS and multiple Repeaters. In this article, we tried traffic analysis of this kind by adopting RTD (Round Trip Delay) which is specially designed to measure distribution of the distance between the Base Station and the Mobile station by differentiating the traffic dealt by BTS from traffic dealt by Repeaters. The fact that the connection between mobile station and BTS via Repeater (which is located remotely) yields far more delay than the direct connection between mobile station and BTS is the clue of this article. Based on this fact, Time Delay equipment was put at the receiving side of the Repeater to add certain amount of delay to the traffic to BTS and the result showed that the 99.78% of the traffic can be identified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.163-168
• /
• 2008

Ship detection from satellite remote sensing is a crucial application for global monitoring for the purpose of protecting the marine environment and ensuring marine security. It permits to monitor sea traffic including fisheries, and to associate ships with oil discharge. An automatic ship detection approach for RADARSAT Fine Synthetic Aperture Radar (SAR) image is described and assessed using in situ ship validation information collected during field experiments conducted on August 6, 2004. Ship detection algorithms developed here consist of five stages: calibration, land masking, prescreening, point positioning, and discrimination. The fine image was acquired of Ulsan Port, located in southeast Korea, and during the acquisition, wind speeds between 0 m/s and 0.4 m/s were reported. The detection approach is applied to anchoring ships in the anchorage area of the port and its results are compared with validation data based on Vessel Traffic Service (VTS) radar. Our analysis for anchoring ships, above 68 m in length (LOA), indicates a 100% ship detection rate for the RADARSAT single beam mode. It is shown that the ship detection performance of SAR for smaller ships like barge could be higher than the land-based radar. The proposed method is also applied to estimate the ship's dimensions of length and breadth from SAR radar cross section(RCS), but those values were comparatively higher than the actual sizes because of layover and shadow effects of SAR.

• The Korean Journal of Quaternary Research
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2006

Flooding hazard caused by natural and artificial environmental changes is closely associated with change in river bed configuration. This study is aimed at explaining a river-bed change related to soil erosion in the Keum river basin using GIS and RS. The USLE was used to compute soil erosion rate on the basis of GIS. River-bed profiles stretching from Kongju to Ippo were measured to construct a 3D-geomorphological map. The river-bed change was also detected by remote sensing images using Landsat TM during the period of 1982 to 2000 for the Keum river. The result shows that USLE indicates a mean soil erosion rate of $1.8\;kg/m^2/year$, and a net increase of a river-bed change at a rate of $+5\;cm/m^2$/year in the Kangkyeong area. The change in river-bed is interpreted to have been caused by soil erosion in the downstream of the Keum river basin. In addition river-bed change mainly occurred on the downstream of the confluence where tributaries and the main channel meet. Other possible river-bed change is caused by a removal of fluvial sand aggregates, which might have resulted in a net decrease of exposed area of sediment distribution between 1991 and 1995, while a construction of underwater structures, including a bridge, a reclamation of sand bars for rice fields and dikes, resulted in an increase of the exposed area of river-bed due to sediment accumulation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.87-98
• /
• 2012

A river boundary is defined as the intersection between a main stream of a river and the land. Mapping of the river boundary is important for the protection of the properties in river areas, the prevention of flooding and the monitoring of the topographic changes in river areas. However, the utilization of the ground surveying technologies is not efficient for the mapping of the river boundary due to the irregular surfaces of river zones and the dynamic changes of water level of a river stream. Recently, the spatial information data sets such as the airborne LiDAR and aerial images are widely used for coastal mapping due to the acquisition of the topographic information without human accessibility. Due to these advantages, this research proposes a semi-automatic method for mapping of the river boundary using the spatial information data set such as the airborne LiDAR and the aerial photographs. Multiple image processing technologies such as the image segmentation algorithm and the edge detection algorithm are applied for the generation of the 3D river boundary using the aerial photographs and airborne topographic LiDAR data. Check points determined by the experienced expert are used for the measurement of the horizontal and vertical accuracy of the generated 3D river boundary. Statistical results show that the generated river boundary has a high accuracy in horizontal and vertical direction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.4
• /
• pp.16-28
• /
• 2013

Recently the various applications and spectral indices development of airborne hyperspectral imagery(A-HSI) has been increased. Especially the vegetation indices (VIs) were used to verify stress and vigor of vegetation. The VIs needs two or more spectral bands selectively to calculate as NIR(near infrared) and red wavelength. The A-HIS has specific band characteristics as narrow, continues and many. The A-HIS has narrow, continues and many specific band characteristics. That could be make it confuse which of bands could be explained for appropriate vegetation characteristics. If the A-HIS bands is not the same the wavelength with VIs' development band setting, then it need a selection adequate for spectral characteristics of target vegetation. Therefore we set 4 substitute bands for NIR and red wavelength respectively and calculated two VIs combined with substitute bands such as NDVI(normalized difference vegetation index) and MSRI(modified simple ratio index). To consider the variation of each VIs, we adapted the image differencing method of change detection technique. Also, we used spectral derivative to identify appropriate bands for spectral characteristics of digital forest cover type map. The result of adequate bands for two VIs selected red #3 as 680.2nm and NIR #2 as 801.7nm. This wavelength was good for any forest type in low variations.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.35-44
• /
• 2005

The objectives of this study were to develop an image processing algorithm for finding the sick or the dead layers(SDL) rearing in the multi-tier layer battery, which is a core technology of remote monitoring systems for layers, and to test the performance of algorithm developed in the experimental poultry housing. Based on the literature study and experiment, the standing up of layer was set as a criterion for judging layers whether sick or dead. Then, by the criterion set, an algorithm was developed. The image processing algorithm developed was tested how well it could and SDL at the experimental poultry housing. Test results showed that its monitoring correctness of layers standing up in the cages having all healthy layers was $92\%$, and $96\%$ in the cages having SDL. Therefore, it would be concluded that the image processing algorithm developed in this study was well suited to the purpose of development.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.395-405
• /
• 2018

Seakeeping safety module in Korean e-Navigation system is one of the ship remote monitoring services that is employed to ensure the safety of ships by monitoring the ship's real time performance and providing a warning in advance when the abnormal conditions are encountered in seakeeping performance. In general, seakeeping performance has been evaluated by simulating ship motion analysis under specific conditions for its design. However, due to restriction of computation time, it is not realistic to perform simulations to evaluate seakeeping performance under real-time operation conditions. This study aims to introduce a reasonable and faster method to predict a ship's roll motion which is one of the factors used to evaluate a ship's seakeeping performance by using a machine learning-based surrogate model. Through the application of various learning techniques and sampling conditions on training data, it was observed that the difference of roll motion between a given surrogate model and motion analysis was within 1%. Therefore, it can be concluded that this method can be useful to evaluate the seakeeping performance of a ship in real-time operation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.3
• /
• pp.156-162
• /
• 2021

The number of smart farms has increased to save labor in agricultural production as the subsidy become available from central and local governments. The number of illegal greenhouses has also increased, which causes serious issues for the local governments. In the present study, we developed Mask-RCNN model to detect greenhouses based on satellite images. Greenhouses in the satellite images were labeled for training and validation of the model. The Mask-RC NN model had the average precision (AP) of 75.6%. The average precision values for 50% and 75% of overlapping area were 91.1% and 81.8%, respectively. This results indicated that the Mask-RC NN model would be useful to detect the greenhouses recently built without proper permission using a periodical screening procedure based on satellite images. Furthermore, the model can be connected with GIS to establish unified management system for greenhouses. It can also be applied to the statistical analysis of the number and total area of greenhouses.