• Korean Journal of Occupational Health Nursing
• /
• v.3
• /
• pp.71-85
• /
• 1993

The objective of this study is to describe the frequency of workplace health promotion activites. For this objective, questionaire was requested to 648 trainees of Korea Industrial Safety Corporation. Respondents' positions were safety manager, health care manager, or representatives of employee. Major findings are as follows: 1) Of responding workplaces, 66.2% supported the activities related to promote employees' health. The support rate was higher of Manufacturing and Tranport than others. And the lager workplaces had the higher support rate. 2) Most frequent activity is exercise program. But the prevalence of smoking cessation, stress management, nutrition education and women health care was very low. Major contents of support were to pay the cost of these activites and to equip the places or the facilities. 3) 24.9% had the non-smoking policy in the workplace. 98.6% equiped the places and facilities for employees. Mean number of facilities across all workplaces was 2.96 and that of exercise circles was 3.60. In conclusion, it was suggested that the stratege was needed to develop the Korean model for workplace health promotion on the basis of exisiting activites.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.117-126
• /
• 2019

PURPOSE: This study examined the effects of a horse riding simulator, gym ball, and McKenzie exercises on back pain and static balance. METHODS: Among 30 participants with chronic back pain and more than 5 points of ODI, 28 participants were selected. Groups of performing either horse riding, gym ball, or McKenzie were chosen randomly to work out two times a week for six weeks. The static balance was measured using a gym plate and the degree of pain was measured by the VAS and K-ODI. RESULTS: When each exercise was applied to back pain patients, the VAS was changed in all three groups but only in the gym-ball exercise group. The K-ODI varied in all three groups but not in the gym-ball exercise group, In the anterior - posterior static balance, all three groups showed changes, but only the riding exercise group was not significant. In the left-right static balance, all three groups were significant. CONCLUSION: This study showed that six-week exercise for back pain patients was effective in improving back pain and balance ability. Continuous exercise minimizes the risk of recurrence and is effective in preventing and treating back pain.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.41-52
• /
• 2002

Purpose : 3D conformal radiotherapy, the optimum dose delivered to the tumor and provided the risk of normal tissue unless marginal miss, was restricted by organ motion. For tumors in the thorax and abdomen, the planning target volume (PTV) is decided including the margin for movement of tumor volumes during treatment due to patients breathing. We designed the respiratory gating radiotherapy device (RGRD) for using during CT simulation, dose planning and beam delivery at identical breathing period conditions. Using RGRD, reducing the treatment margin for organ (thorax or abdomen) motion due to breathing and improve dose distribution for 3D conformal radiotherapy. Materials and Methods : The internal organ motion data for lung cancer patients were obtained by examining the diaphragm in the supine position to find the position dependency. We made a respiratory gating radiotherapy device (RGRD) that is composed of a strip band, drug sensor, micro switch, and a connected on-off switch in a LINAC control box. During same breathing period by RGRD, spiral CT scan, virtual simulation, and 3D dose planing for lung cancer patients were peformed, without an extended PTV margin for free breathing, and then the dose was delivered at the same positions. We calculated effective volumes and normal tissue complication probabilities (NTCP) using dose volume histograms for normal lung, and analyzed changes in doses associated with selected NTCP levels and tumor control probabilities (TCP) at these new dose levels. The effects of 3D conformal radiotherapy by RGRD were evaluated with DVH (Dose Volume Histogram), TCP, NTCP and dose statistics. Results : The average movement of a diaphragm was 1.5 cm in the supine position when patients breathed freely. Depending on the location of the tumor, the magnitude of the PTV margin needs to be extended from 1 cm to 3 cm, which can greatly increase normal tissue irradiation, and hence, results in increase of the normal tissue complications probabiliy. Simple and precise RGRD is very easy to setup on patients and is sensitive to length variation (+2 mm), it also delivers on-off information to patients and the LINAC machine. We evaluated the treatment plans of patients who had received conformal partial organ lung irradiation for the treatment of thorax malignancies. Using RGRD, the PTV margin by free breathing can be reduced about 2 cm for moving organs by breathing. TCP values are almost the same values $(4\~5\%\;increased)$ for lung cancer regardless of increasing the PTV margin to 2.0 cm but NTCP values are rapidly increased $(50\~70\%\;increased)$ for upon extending PTV margins by 2.0 cm. Conclusion : Internal organ motion due to breathing can be reduced effectively using our simple RGRD. This method can be used in clinical treatments to reduce organ motion induced margin, thereby reducing normal tissue irradiation. Using treatment planning software, the dose to normal tissues was analyzed by comparing dose statistics with and without RGRD. Potential benefits of radiotherapy derived from reduction or elimination of planning target volume (PTV) margins associated with patient breathing through the evaluation of the lung cancer patients treated with 3D conformal radiotherapy.

• Korean journal of food and cookery science
• /
• v.16 no.2
• /
• pp.135-142
• /
• 2000

The purpose of this study was to investigate the effects of onion and garlic juice on the lipid oxidation of fish oil as antioxidants and quality characteristics of fish muscle. The samples were treated with onion and garlic juice at 5%(w/w) or 10%(w/w) of fish muscle, and stored at 4$\pm$1$\^{C}$ and -18$\pm$2$\^{C}$ for 7 and 42 days, respectively. The results of this study were as follows: Lipid oxidation in samples was measured by AV, POV and TBA value. AV and TBA values of the samples treated with 5% onion and garlic juice were lower than those treated with l0% onion and garlic juice. POV of the samples treated with onion were lower than those treated with garlic juice. Lightness and yellowness of the sample were the highest in 10% onion and garlic juice-treated ones. The score of overall quality in sensory evaluation was the highest in the samples treated with onion juice stored at 4$\pm$1$\^{C}$.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2015

There are many efforts to mechanize the process for underwater port construction due to the severe and adverse working environment. This paper presents an underwater construction robot to level rubbles on the seabed for port construction. The robot is composed of a blade and a multi-functional arm to flatten the rubble mound with respect to the reference level at uneven terrain and to dig and dump the rubbles. This research analyzes the kinematics of the blade and the multi-functional arm including track and swing motions with respect to a world coordinate assigned to a reference depth sensor. This analysis is conducted interfacing with the position and orientation sensors installed at the robot. A hydraulic control system is developed to control a track, a blade and a multi-functional arm for rubble leveling work. The experimental results of rubble leveling work conducted by the robot are presented in land and subsea. The working speed of the robot is eight times faster than that of a human diver, and the working quality is acceptable. The robot is expected to have much higher efficiency in deep water where a human diver is unable to work.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.645-661
• /
• 2013

The synoptic, thermodynamic, and dynamic characteristics of a heavy snowfall event that occurred in Seoul metropolitan area on 27 to 28 December 2010 was investigated. During this period there was a distinctive case that was identified as a polar low. We analyzed surface and upper level weather charts, snowfall amount, sea surface temperature, satellite imagery, sounding, and the National Center for Environmental Prediction global $1^{\circ}{\times}1^{\circ}$ reanalysis data. The polar low developed in an area where there was strong baroclinicity in the lower level aided by strong conditional instability due to 925 hPa warm air advection and 700 hPa cold air advection. The development mechanism of polar low is due, in part, to the tropopause folding, which advected stratospheric air increasing potential vorticity in mid-level and inducing cyclonic vorticity and convergence in low-level. Eventually clouds developed and there were snowfall total of 10 cm in Seoul metropolitan area and as much as 20 cm in southern parts of Korea. During the snowfall development, there was a $-45^{\circ}C$ cold core at 500 hPa and shortwave maintained $3-5^{\circ}$ separation with surface trough, which favored the development of polar low located in the warm sector and cyclonic advection area. The height of the dynamical tropopause lowered to 700 hPa during the peak development and increase in potential vorticity allowed strong vertical motion to occur. Overall, there was a close relationship between the development of snowfall and tropopause undulation. The heaviest snowfall occurred east of the tropopause folding where strong cyclonic vorticity, vertical motion, and moisture advection all coincided while the polar low was passing through the Korean peninsula.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.2
• /
• pp.52-59
• /
• 2008

The objective of this study is to develop an automatic object changer unit to improve processing problems existed in the conventional horizontal machining center. To achieve this goal, this study designed a horizontal transfer as the second project continued to the first project that designed a upward and downward traverse unit. A horizontal traverse unit shows a symmetric structure and consists of frame, which consists of four unit tools, motor and reducer, which are fixed at a frame, operation unit with pinions, first traverse unit, and second traverse unit. Constraint conditions based on the operation mechanism with these elements were configured and obtained following results after modeling a model for a traverse motor. In the kinematic expression of sliding motion with one degree of freedom, the sliding motion is constrained. Also, the rack 3 installed at a frame is used to configure possible kinematic constraint conditions of the rack 2 according to the rolling motion of the pinion 2 in the first traverse unit. In addition, the moment of inertia that is a type of kinetic energy in a converted horizontal traverse unit in the side of the reducer can be applied to introduce the moment of inertia of a converted horizontal traverse unit in the side of the reducer by using the sum of kinetic energy in the rack and pinion, which is a part of the horizontal traverse unit. Also, the equation of motion of the converted upward and downward traverse unit in the side of the motor using the equation of motion of the motor. Furthermore, the horizontal traverse unit predetermines the mass of the first and second traverse unit and applied load including the radius and reduction ratio of the pitch circle in the pinion 1 and applied load to the rack 2. Then, a proper motor can be determined using several parameters in the upward and downward traverse unit in order to verify such predetermined specifications. In future studies later this study, a simulation that verifies the results of the previous two stages of studies using a finite element method.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.360-366
• /
• 2012

In the power distribution panel installed in airport or industrial facilities, MCCB has been used for main switch and ELCB for branch switch to perform human body and leakage-inducing fire protection as well as overcurrent and short circuit protection. Especially for the airport panel, increase in accident protection is needed for stable power supply due to rapid modernization with fast-growing users, higer capacity and diversification of equipment, the increase of power capacity and the breaker made slim is a main issue for now because the issue for installation space is standing out by making panel with two-row arrangement connection method, etc. due to a many use of branch ELCBs. In this thesis, we designed arc extinguishing mechanism, considered movement direction change of contact in mechanism design. Also, we designed the breaker to work stably in case of miniaturization of leakage detection circuit and reverse connection. We conducted short circuit test to verify its function and developed the breaker that can be improved protection against accidental current with slim size operating leakage function when reverse connection to help solve the problem in using space that is increasing in the airport distribution panel.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.1067-1076
• /
• 2016

This paper describes the development of a hybrid-powered wheelchair (HPW) for the elderly. The proposed HPW has novel mechanical and control features compared with conventional powered wheelchairs. An ergonomic back-braking mechanism was designed in order to stop the wheels easily. In terms of control features, the HPW remarkably reduces the muscle power required by combining various assistive functions, such as wheel torque assistance, friction/inertia compensation, gravity compensation, and the one-hand driving algorithm. For wheel torque assistance, strain gauges were attached to the hand-rim in order to measure the wheel torque applied by a human. Gyroscopes and an accelerometer were attached to the wheel and chair respectively for friction and inertia compensation. An inclinometer was attached for gravity compensation and the one-hand driving algorithm was included for patients who can only use one hand. The one-hand driving algorithm controls the angular velocity of the uncontrolled wheel by using a gyroscope and pressure sensors attached to the bottom of the seat. Finally, the performance of the proposed motion assisted algorithm was verified through various experiments.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai