• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.385-391
• /
• 2022

This paper presents to develop a path planning algorithm combining gradient descent-based path planning (GBPP) and particle swarm optimization (PSO) for considering prohibited flight areas, terrain information, and characteristics of fixed-wing unmmaned aerial vehicle (UAV) in 3D space. Path can be generated fast using GBPP, but it is often happened that an unsafe path can be generated by converging to a local minimum depending on the initial path. Bio-inspired swarm intelligence algorithms, such as Genetic algorithm (GA) and PSO, can avoid the local minima problem by sampling several paths. However, if the number of optimal variable increases due to an increase in the number of UAVs and waypoints, it requires heavy computation time and efforts due to increasing the number of particles accordingly. To solve the disadvantages of the two algorithms, hierarchical path planning algorithm associated with hierarchical particle swarm optimization (HPSO) is developed by defining the initial path, which is the input of GBPP, as two variables including particles variables. Feasibility of the proposed algorithm is verified by software-in-the-loop simulation (SILS) of flight control computer (FCC) for UAVs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.599-608
• /
• 2022

Urban air mobility (UAM) equipped with rotor system is subject to ground effect at vertiport during takeoff and landing. The aerodynamic performance of the aircraft in ground effect should be analyzed for the safe operation. In this study, The ground effects on the aerodynamic performance and wake structure of the quadcopter electric vertical takeoff and landing (eVTOL) configuration equipped with coaxial counter-rotating propellers were investigated by using the lattice Boltzmann method (LBM). The influence of the ground effect was observed differently in the upper and lower propellers of the coaxial counter-rotating propeller system. There was no significant change in the aerodynamic performance of the upper propeller even if the propeller height above the ground was changed, whereas the averaged thrust and torque of the lower propeller increased significantly as propeller height decreased. In addition, the amplitude of the thrust fluctuation tended to increase as the propeller height decreased. The propeller wake was not sufficiently propagated downstream and was diffused along the ground due to the outwash flow developed by the ground effect. The impingement of the rotor wakes on the ground and a fountain vortex structure were observed.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.23-34
• /
• 2022

Cities around the world are increasing their demand for Urban Air Mobility (UAM) aircraft due to traffic congestion with population concentration. Aircraft with various shapes depending on fixed-wing and propulsion systems, are being prepared for commercialization. Airworthiness certification is required as it is a manned transportation vehicle that flies in the city center and transports people on board. UAM aircraft are vulnerable to lightning and HIRF environments due to the increasing use of composite materials, the use of electric motors, and use of electronic equipment. Currently, the development of certification technology, guidelines, and requirements in lightning and HIRF environments for UAM aircraft is incomplete. In this study, the certification procedures for lightning and HIRF indirect impacts of rotorcraft shown in AC 20-136B and AC 20-158A issued by the Federal Aviation Administration (FAA), were verified and applied to the computerized simulation of UAM aircraft. The impact of lightning and HIRF on ducted fan UAM aircraft was analyzed through computerized simulation, and the basis for establishing practical guidelines for certification of UAM aircraft to be operated in the future is presented.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.56-69
• /
• 2022

Various advanced countries are accelerating the competition in the development of hypersonic weapons. North Korea is on the verge of building a new submarine equipped with a submarine-launched ballistic missile (SLBM). A series of new guided missiles tests have continued due to political competition between the U.S. and China. The Republic of Korea is planning to boost its military capabilities, which involves the development of nuclear-powered submarines, light aircraft carriers, and new guided missiles. The northeast Asian region continues to be tense amid military rivalry between the Republic of Korea, North Korea, the United States, China, Russia, and Japan. Accordingly, these countries' competition to develop weapons is also at the world's highest level. In this paper, we examine the functioning of a hypersonic weapons system conduct a technical analysis of its components. In addition, we analyze the direction of military development that the Korean military wants to pursue through the recently announced mid-term defense plan. We conclude by highlighting the technical limitations and implementation strategies to overcome the development of hypersonic weapons.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.1-11
• /
• 1999

Thermal behavior of spacecraft propulsion system utilizing monopropellant hydrazine ($N_2$$H_4$) is addressed in this paper. Thermal control performance to prevent propellant freezing in spacecraft-operational orbit was test-verified under simulated on-orbit environment. The on-orbit environment was thermally achieved in space-simulation chamber and by the absorbed-heat flux method that implements an artificial heating through to the spacecraft bus panels enclosing the propulsion system. Test results obtained in terms of temperature history of propulsion components are presented and reduced into duty cycles of the avionics heaters which are dedicated to thermal control of those components. The duty cycles are subsequently converted into the electrical power required in the operational orbit. Additionally, cyclic temperature of each component, which was made under thermal-balanced condition of spacecraft, is compared to the acceptable design range and justified from the viewpoint of system verification.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.491-504
• /
• 2008

CSSA (Coarse Sun Sensor Assembly) is the essential sensor for satellite attitude control. CSSA measures the direction of the sun's rays and determines whether the satellite is in the ellipse. The paper shows the development process and test results of Path-finder & Qualified Model CSSA as the preceding development in order to develop the CSSA for low earth orbit satellite. We needs the definite and precision procedure and lots of experience. This paper shows that we can improve those through the development of Path-finder and Qualified Model CSSA. Therefore, we can obtain the results to meet the functional requirement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.207-210
• /
• 2009

This paper presents development status of sounding rockets containing scientific payload and telemetry at home and abroad. The case of outside, united state is launching sounding rockets in 20-30 flight per year by the NASA program which offer to carry payload weights of 38-680 kg and altitude of 88-1,500 km. Europe is launching in 4-5 flight per year by the ESA program. Japanese sounding rockets are being applied an Antarctic exploration and flight verification in 1-2 flight per year. The case of korean sounding rockets was successful with the launch of three times(KSR-I,II,III), but our development techniques for space launch vehicle lag behind other industries. Therefore, Launch vehicle development should enable with the support and acquirement of advanced technology.

• Composites Research
• /
• v.29 no.6
• /
• pp.358-362
• /
• 2016

Mechanical properties of static and dynamic behavior became important since the use of conical composite tubes in large structures such as aerospace, planes, and submarines as well as leisure goods such as bicycle frames, fishing rods, and golf shafts. In the past, the mechanical property prediction model for static behavior was studied using vibration, bending, and buckling. But there is a need to study how fiber orientation error affects mechanical properties of conical composite structure because the model assumes constant fiber orientation angle. The purpose of this study is to derive an equation that can predict the static behavior of conical composite tube for bicycle frames by considering fiber orientation error with respect to various design parameters.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.70-77
• /
• 2011

A ventilation-relief valve performs as a safety-valve assembly for the liquid-propellant feeding system of space launch vehicle. This valve plays a role of relieving the vaporized propellants from propellant tanks during the filling and storing stages of propellants. Also it regulates to maintain the pressure of ullage volume of on-board propellant tanks within the safety-margin during the flight. The simulation model of ventilation-relief valve is designed with AMESim to predict and evaluate the dynamic characteristics and pneumatic behaviors of valve. To validate a valve simulation model, the simulation results of the opening and closing pressures and their operating durations of valve by AMESim analysis are compared with the results of mathematical methods. In addition, the results of internal flow simulation with FLUENT are utilized to improve the accuracy of valve-modeling. This study will serve as one of reference guides to enhance the developmental efficiency of ventilation-relief valves with the various operating conditionss, which shall be used in Korea Space Launch Vehicle-II.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.55-59
• /
• 2010

Recently it is tried to use load control model for maneuver moving object. MIN design method proposed to solve control problem of nonlinear system using load concept. The Min design method shows direct method for finding control value on the load control model. In this paper, is shown realization free falling model using nonlinear load control model and analysis of load values acting falling object according to disturbance. And made a trajectory according to acting load values due to disturbance. This paper's result is able to be applied to design algorithm for improvement accuracy of MLRS, GPS air-to-surface missile(ASM) and returning spacecraft with nonlinear model predictive control.