• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.19-26
• /
• 2024

In this study, the electrochemical properties of SiOx@C composite materials were prepared to alleviate volume expansion and cycle stability of silicon and to increase the capacity of anode material for LIBs. SiO₂ particles of 100, 200, and 500 nm were synthesized by the Stӧber method, and reduced to SiOx (0≤x≤2) through the magnesiothermic reduction method. Then, SiOx@C anode materials were synthesized by carbonization of PVC on SiOx. The physical properties of prepared SiOx and SiOx@C anode materials were analyzed by XRD, SEM, TGA, Raman spectroscopy, XPS and BET. The electrochemical properties were investigated by cycling performance, rate performance, CV and EIS test. As a result, the SiOx@C-7030 manufactured by coating carbon at SiOx : C = 70 : 30 on a 100 nm SiOx with the smallest particle size showed the best electrochemical properties with a discharge capacity of 1055 mAh/g and a capacity retention rate of 81.9% at 100 cycles. It was confirmed that cycle stability was impoved by reducing particle size and carbon coating.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.140-147
• /
• 2024

In order to increase the utilization of biomass, an electrochemical performance was considered after manufacturing a carbon anode material (SV-C) for a Setaria viridis-based lithium ion secondary battery through a heat treatment process. When the heat treatment temperature of the Setaria viridis is as low as 750 ℃, the capacitance (1003.3 mAh/g, at 0.1 C) is high due to the negative (-) charge of oxygen present on the surface attracting lithium, along with the low crystallinity and high specific surface area (126 m²/g), but the capacity retention rate is believed to be as low as 61.0% (at 500 cycles and 1 C). In addition, it was confirmed that when the heat treatment temperature increased to 1150 ℃, the carbon layer was condensed to be excellent in arrangement, and the structural defects were reduced, resulting in a significant reduction in the specific surface area (32 m²/g) of the pores. Furthermore, when the surface defects of the anode material are reduced and the crystallinity is increased, the capacity retention rate is as high as 89.7% (at 500 cycles and 1 C), but the degree of defects is small, the active point is reduced, and the specific capacity is considered to be very low at 471.7 mAh/g. In the scope of this study, it was found that in the case of the Setaria viridis-based carbon anode material manufactured according to the heat treatment temperature, the surface oxygen content and crystallinity have higher reliability on the electrochemical properties of the anode material than the specific surface area.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.335-340
• /
• 2024

In this paper, we synthesized organic and inorganic hybrid materials to introduce antibody functionality to UIO-66 and incorporated them into a surface plasmon resonance (SPR) assay to enhance the sensitivity of detecting small molecules such as oxytocin. A biological marker peptide called oxytocin may help in the diagnosis of heart failure, Alzheimer's disease, and cancer. To detect oxytocin at concentrations as low as a few femtomole (fM), we developed a surface sandwich assay utilizing a pair of oxytocin-specific antibodies for enhancing selectivity and one of metal organic frameworks [e.g., UiO-66-(COOH)₂] possessing high porosity and surface-area as a signal amplifier. Initially, real-time SPR assays were used to confirm that each selected oxytocin-specific antibody binds strongly to oxytocin and to different binding sites on oxytocin. One of these antibodies (e.g., anti-OXT[OTI5G4]) was immobilized on the surface of a thin gold chip. Upon sequential injecting of oxytocin and the other antibody (e.g., anti-OXT[4G11]) conjugated to UiO-66-(COOH)₂ onto the surface to form the surface sandwich complex of anti-OXT[OTI5G4]/oxytocin/UiO-66-(COOH)₂-anti-OXT[4G11]), SPR changes, which varied with oxytocin concentration, were then measured in real time. The results demonstrated that sensitivity was amplified by over a million-fold compared to assays without UiO-66-(COOH)₂, enabling oxytocin detection down to approximately 10 fM.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.295-301
• /
• 2023

This study was conducted to determine the optimal dipping time and concentration of gibberellin for improving the growth and quality of domestic cultivar 'Seolhyang' strawberry when using runner plants. Strawberry runner plants were collected on November 10th and soaked in GA₃ concentrations of 50, 100, and 150 mg·L^-1 for 30 and 60 minutes, respectively. After 75 days of planting, the growth results showed that in the 30-minute, 50 mg·L^-1 treatment, the crown diameter was thicker and the T/R ratio was lower, indicating better plant vitality. Runner length increased with lower gibberellin concentrations, particularly promoting vegetative growth. Photosynthetic efficiency was more influenced by gibberellin concentration than dipping time, and using concentrations above a certain threshold acted as a stress factor for runner plants, leading to decreased photosynthetic efficiency. For enhancing seedling growth, soaking with 50 mg·L^-1 of gibberellin for 30 minutes was found to be optimal. This study verified the effects of gibberellin treatment on strawberry runner plants to improve plant growth and quality, providing useful basic data for using gibberellin.

• Korean Journal of Poultry Science
• /
• v.40 no.1
• /
• pp.25-29
• /
• 2013

This study was conducted to evaluate the antimicrobial and antioxidant effects of ripened medicinal herb extracts from wood vinegar. The wood vinegar was collected from heated oaks. The Allium sativum (AS), Atractylodes ovate (AO), Cin-namomum zeylanicum (CZ), Coptidis rhizome (CR), Houttuynia cordata (HC), Phellodendron chinense (PC) and Syzygium aromaticum (SA) extracts were collected using wood vinegar, and they were ripened under room temperature for 50 days. All ripened medicinal herb extracts were used to test the antimicrobial and antioxidant activities. For the Lactobacillus, clear zone of 6 different medicinal herb except for CR ranged from 1.28 to 1.63 mm. 3.30 and 3.48 mm of clear zone were determined when CZ and SA were applied to Salmonella and E. coli, respectively (p<0.05), and they showed the largest clear zone as compared to other herbs. The clear zones of CR for Salmonella and E. coli were 2.21 and 3.34 mm, and each clear zone of CR was smaller than that of CZ (p<0.05) but was similar to that of SA (p>0.05). The amount of polyphenol and flavonoid was the highest in SA and CR, and they were 4.28 and 0.38 mg/mL, respectively (p<0.05). The CR shown 0.38 mg/mL flavonoid, had the highest DPPH, and it was 0.41 mM. The DPPH of HZ was significantly lowered in accordance with high amount of polyphenol and flavonoid, 2.56 and 0.20 mg/mL (p<0.05). In conclusion, CZ, SA, and CR showed high antimicrobial and antioxidant potentials, and therefore, may be used as alternatives to antibiotics for poultry diets.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.11-17
• /
• 2003

pH value of sampled fogwater at source regions (above highway and road) in Yongin sites showed the lowest value and was increased after passing the forest stands. Changes of ion concentrations through the forest stands showed a lowering tendency at sampling sites. The fogwater passing the forest stands (Quercus mangolica and Pinus rigida) surrendered acid pollutants to crown and stem from the atmosphere. It was concluded that environmental moisture in the atmosphere is acidified in fogwater. The influence was extended to the pure zone, and the frequency of acid rain has increased. The forests are assumed to remove air pollutants because ion concentrations in fogwater decreased after passing the forests. The fogwater which functions as a local sink for pollutants (H$_2$SO$_4$, HNO$_3$, etc.) falling on plant surfaces is considered to effectively remove acid pollutants. But if the deposition of pollutants exceeds the capacity of purification, it would damage the forest ecosystem. Further investigation is necessary to identify tree species tolerant to acid pollutants.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.3
• /
• pp.215-220
• /
• 2008

This experiment was conducted to compare forage production and feed value of winter forage crops at the experimental field of Livestock Division, National Institute of Subtropical Agriculture from 2007 to 2008. The experiment was arranged in a randomized block design with three replications. The five winter forage crops used in this experiment were barely ('Youngyang' and 'Yuyeon'), oats ('Samhan' and 'Swan'), wheat ('Kumkang' and 'Woori'), triticale ('Shinyoung') and italian ryegrass ('Hwasan 101' and 'Florida-80'). The species having the fastest heading date was wheat (5th April) while the heading date of oats ('Samhan') was the latest as 28th April. The dry matter (DM) content of wheat was the highest among the five winter forage crops. Italian ryegrass ('Hwasan 101') showed the highest CP content by 11.2% and oats (Swan) showed the lowest content by 9.8%. Average acid detergent fiber (ADF) and neutral detergent fiber (NDF) content were 28.6 and 50.8% respectively. The five winter forage crops have narrow range of total nutrient digestibility (TDN) from 64.0% to 69.1%. Italian ryegrass ('Hwasan 101') showed the highest DM yield by 25,951 kg/ha, but the DM yield of barely and wheat low by 13,892 kg/ha ('Yuyeon') and 14,815 kg/ha ('Woori'), respectively. Italian ryegrass and oats have higher forage yield and feed value in Jeju. Also, oats has high grain and forage yield. The results demonstrated oats can cultivate as alternative winter forage crop for whole crop silage barely in Jeju.

• Applied Biological Chemistry
• /
• v.15 no.3
• /
• pp.241-249
• /
• 1972

The characteristic and efficiency of natural shell sand in the coast of Cheju-Do and Jin-Do were studied to apply as agricultural lime for the soil acid adjustment. 1. The alkalinity of shell sand from Cheju coast was higher than that of Jindo and more weathered into fine particles. The particle size distributions of Cheju shell sand were condensed finer particles than 32 mesh in Cheju shell sands and in more coarser particles than 32 mesh in Jindo one. 2. The effect of Cheju shell sand on increasing soil pH value in the upland condition was low at the beginning but more gradually increased after 8 weeks from the treatment than ground lime, and Jindo was very dull during the period of treatment. The commercial lime crushed from Jindo was approximately equal to the ground lime. 3. In the submerged condition, the shell sand of Cheju reacted with soil acid more quickly than ground lime after 2 days, and Jindo was very slow. 4. The relative efficiency of various particle size fraction of the shell sand was superior to the ground lime. The lime particles between 9 to 14 mesh and 20 mesh had more remarkable difference of pH value than other fine particles. The efficiency among finer sizes than 20 mesh particle was approximately equal to each others. 5. The shell sand from the Cheju would be applied directly as agricultural lime without any treatment, and Jindo also can be expected to be effective as agricultural lime with crushing procedure.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.43-52
• /
• 2017

EtOAc fractions of Magnolia obovata (M. obovata) Bark extracts were studied for the potential ingredient as a safe and effective whitening cosmetic material. The concentration of active substances honokiol was determined by HPLC. In vitro, the fractions reduced the extracellular and intracellular melanin contents in B16F10 cells in dose dependently and inhibited extracellular melanin secretion ($IC_{50}=11.05{\mu}g/mL$). The $12.5{\mu}g/mL$ treatment of maximum concentration effectively inhibited up to about 60% to the amount of extracullular melanin. Also, the $12.5{\mu}g/mL$ treatment of maximum concentration effectively inhibited up to about 59% to the amount of intracullular melanin ($IC_{50}=10.85{\mu}g/mL$). The $IC_{50}$ value of ${\alpha}-arbutin$ used as a positive control was $59.99{\mu}g/mL$. So, EtOAc fractions of M. obovata Bark extracts showed whitening effect when compared with the non-treatment group. In case of in vivo study, Cosmetic cream with EtOAc fractions of M. obovata Bark extracts was approved by Ethics committee of KDRI (IRB number: KDRI-IRB-1537). As a result in progress for skin sensitization as well as assessment of skin irritation through repeated patch test, skin allergens was identified as non sensitizing agents. Also, cosmetic cream with EtOAc fractions of M. obovata Bark extracts showed significant topical whitening effect and reliable skin safety when compared with the non-treatment group. In conclusion, EtOAc fractions of M. obovata Bark extracts may be a useful cosmetic ingredient for effective skin whitening.