• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.140-147
• /
• 2012

This study developed a flowerbed type infiltration system that could control the amount of runoff discharge under a certain level estimated its proper design infiltration rate, and analyzed the effects of its implementation. Analyzing the performance of infiltration system is the one of the essential processes that should be under review to predict its effects after implementation when a rainwater infiltration system is included in a district-based plan. To estimate the unit design infiltration rate of this system, the runoff decrease effect was analyzed by varying the unit infiltration rate of the system applied to the parking lot adjacent to the Korea Institute of Construction Technology laboratory building by using a water balance analysis program. After varying the unit design infiltration to $0.1{\sim}3m^3/m^2.day$ to analyze the variation in the rate of runoff, 80% of the runoff was infiltrated at $1.0m^3/m^2.day$, and the unit infiltration design rate at the time was 0.0416(m3/m2.hr). It was also found that the unit design infiltration rate obtained from a field infiltration test of the developed system was about $0.045m^3/hr$. Based on this study, it was possible that infiltration rate is estimated to consider the economic scale and environmental effect. It is significant to apply the spatial plan of rainwater infiltration system as green infrastructure.

• Journal of Korea Multimedia Society
• /
• v.14 no.9
• /
• pp.1165-1174
• /
• 2011

In data broadcasting systems, servers continuously disseminate data items through broadcast channels, and mobile client only needs to wait for the data of interest to present on a broadcast channel. However, because broadcast channels are shared by a large set of data items, the expected delay of receiving a desired data item may increase. This paper explores the issue of designing proper data allocation on multiple broadcast channels to minimize the average expected delay time of all data items, and proposes a new data allocation scheme named two level bin-packing(TLBP). This paper first introduces the theoretical lower-bound of the average expected delay, and determines the bin capacity based on this value. TLBP partitions all data items into a number of groups using bin-packing algorithm and allocates each group of data items on an individual channel. By employing bin-packing algorithm in two step, TLBP can reflect a variation of access probabilities among data items allocated on the same channel to the broadcast schedule, and thus enhance the performance. Simulation is performed to compare the performance of TLBP with three existing approaches. The simulation results show that TLBP outperforms others in terms of the average expected delay time at a reasonable execution overhead.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.662-670
• /
• 2008

The purpose of this in vitro study was to evaluate the effect of fluoride containing adhesive film on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 25: (1) APF gel applied ; (2) CavityShield$^{TM}$ applied; (3) 3% fluoride film applied; (4) 5% fluoride film applied; Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 72 hours. Then lesion of the surface microhardness were measured by the Vicke's hardness test and the lesions depth were measured by polarizing light microscope. The results of the present study are as follows: 1. Difference of microhardness value ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group IV, III, I but, no significant difference was between group II, III and IV. 2. Difference of mean lesion depth ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group III, IV and I but no significant difference was between group III and IV. The results of the present study indicate that the fluoride film application is more effective than APF gel and is similar to fluoride varnish application for prevention of dental caries.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.451-455
• /
• 2006

An efficient pilot scale (10 ton) three-stage methane fermentation system to digest food waste has been developed in this laboratory. This system consisted of three stages: semianaerobic hydrolysis, anaerobic acidogenesis and strictly anaerobic methanogenesis. From the secondary acidogenesis reactor, a novel strain KA4 responsible for alcohol fermentation was isolated and characterized. The cell was oval and its dimension was $5.5-6.5{\times}3.5-4.5\;{\mu}m$. This strain was identified as Saccharomyces cerevisiae KA4 by 26S rDNA D1/D2 rDNA sequence. Optimal culture temperature was $30-35^{\circ}C$. Cells were tolerant to 5% (v/v) ethanol concentration, however, were inhibited significantly by higher ethanol concentration up to 7%. The strain could grow well up to 50% (w/v) initial glucose concentration in the YM liquid medium, however, optimal concentration for ethanol fermentation was 10%. It could produce ethanol in a broad initial pH range from 4 to 10, and optimal pH was 6. In this condition, the strain converted 10% glucose to 7.4% ethanol during 24 hr, and ethanol yield was estimated to be 2.87 moi EtOH/mol glucose.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.17-31
• /
• 2017

The purpose of this study was to carry out a comprehensive assessment of Donjibong Park in Daegu and establish a master plan for green space considering the functional characteristics of the park. For this purpose, green space in the park was assessed based on 13 indicators using three functions. A comprehensive green master plan was then proposed. Green spaces with high scores for the natural-ecological and environmental-control functions were found in the central area of the park, whereas green spaces with low scores were found near the park boundary and paved areas. Green spaces in the southeast were found to have a high score for usage functions due to their proximity to a residential area. In the master plan based on the comprehensive assessment, the plan space was divided into a conservation area, restoration area, buffer area, environmental monitoring area, observatory/trail/facility area, and waterside green space area. Also, concrete plan directions were proposed based on each plan space. These results can be utilized for establishing objective plans in the future construction of new parks.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.4
• /
• pp.53-63
• /
• 2008

Reader collision may occur when neighboring RFID readers use the same channel at the same time. Especially when the readers are operated in dense mode, even though many channels are available, because of frequent reader collisions we can not guarantee the performance of RFID readers. Conventional solutions such as FH(Frequency Hopping) or LBT(Listen Before Talk) are not effective in this situation because they can not schedule RFID readers effectively when RFID readers are operated in multi-channel, dense reader mode, In this paper, we propose a new RFID reader anti-collision algorithm which employs LBT, random backoff before channel access, and probabilistic channel hopping at the same time. While LBT and Random backoff before channel access reduces collisions between competing readers, probabilistic channel hopping increases channel utilization by adaptively changing the hopping probability by reflecting the reader density and utilization. Simulation results shows that our algorithm outperforms conventional methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.70-81
• /
• 2009

Statement of problem: The position and length of cantilever influence on the stress distribution of implants, superstructure and bone. In edentulous mandible, implant-supported cantilever prostheses that based 4 or 6 implants between mental foramens has been attempted. Excessive bite force loaded at cantilever prosthesis causes bone resorption and breakage of superstructure prosthesis around posterior implants. To complement the cantilever length of conventional prosthesis, In 1992, (McCartney) introduced "cantilever-rest-implant" and Malo reported "All-on-Four" in 2003. Purpose: Analyze and compare the stress distribution of conventional cantilever prostheses with rest implant and All-on-$Four^{TM}$ implant prostheses. Material and method: The external loads(300 N vertically, 75 N horizontally) are applied to first molar area. The stress value, stress distribution and aspect of stress dispersion are analyzed by three-dimensional finite element analysis program, ANSYS ver. 10.0. Results: 1. The rest implant and "All-on-Four" implant system are superior to conventional cantilever prostheses to reduce stress on the bone and the superstructure around implants. 2. The rest implant was of the greatest advantage to stress distribution on bone, implant and superstructure. 3. With same number of implants, distally tilted implants are preferred to conventional cantilever prostheses for reducing the length of cantilever.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.638-648
• /
• 2020

Currently, the method of user-follwoing in intelligent cooperative robots usually based in vision system and using Lidar is common and have excellent performance. But in the closed space of Corona 19, which spread worldwide in 2020, robots for cooperation with medical staff were insignificant. This is because Medical staff are all wearing protective clothing to prevent virus infection, which is not easy to apply with existing research techniques. Therefore, in order to solve these problems in this paper, the ultrasonic sensor is separated from the transmitting and receiving parts, and based on this, this paper propose that estimating the user's position and can actively follow and cooperate with people. However, the ultrasonic sensors were partially applied by improving the Median filter in order to reduce the error caused by the short circuit in communication between hard reflection and the number of light reflections, and the operation technology was improved by applying the curvature trajectory for smooth operation in a small area. Median filter reduced the error of degree and distance by 70%, vehicle running stability was verified through the training course such as 'S' and '8' in the result.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.42-52
• /
• 2012

In this paper, a waveguide antenna is designed and fabricated for side and rear radar sensor of vehicles in UWB (Ultra Wide Band) high band (center frequency : 9.5 GHz, -10 dB bandwidth : 600 MHz (6.4 %)). For the radar antenna, a probe fed rectangular waveguide antenna having simple structure and wide bandwidth is used. An important performance factor in this antenna is the isolation between transmitting (TX) and receiving (RX) waveguide antennas because this radar system uses TX and RX antennas separately. Thus the isolation between two antennas was simulated for E-plane and H-plane array. As a result, it was verified that the isolation of the H-plane array of the antennas is better than E-plane array, due to the TE10 mode. Therefore, H-plane arrayed waveguide antennas were mounted on a T-shaped radar module and performance of antennas was investigated. The -10 dB bandwidth of the TX and RX antenna mounted on T-shaped radar module was measured as 1000 MHz (10.52 %) and 1090 MHz (11.47 %) respectively and the isolation is less than -50 dB in the operation band. The peak gain is 7.65 dBi for the TX antenna and 7.26 dBi for the RX antenna and the beamwidth of H-plane of TX and RX antenna was measured as $64^{\circ}$ and $65^{\circ}$ respectively. Consequently, we verified that the proposed waveguide antenna is appropriate for a vehicle radar applications.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.401-414
• /
• 2014

In an attempt to evaluate licorice quality based on its biological activity, we grafted an on-line high-performance liquid chromatography (HPLC) bioassay method into the previously established HPLC analysis method. The common antioxidant peaks in licorices of various origin were observed through an on-line HPLC/DPPH system leading to a decrease in absorbance at 517 nm for 2,2-diphenyl-1-picrylhydrazyl (DPPH). Among them, the licorice from Youngju possessed the highest activity. Therefore, three active standard compounds from the dehydroglyasperin C, dehydroglyasperin D, and isoangustone A, were isolated and elucidated by medium pressure liquid chromatography (MPLC) and instrumental analysis such as nuclear magnetic resonance (NMR), respectively. On-line HPLC/ABTS analysis method with the simultaneous determination of three standard compounds and their radical scavenging activity was established for the quality evaluation of licorices. 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid radicals (ABTS) which is stable and effective was used in replace of DPPH. The radical scavenging activity of three standards is compared with that of Trolox, known as antioxidant, showing a negative peak with a decrease in absorbance at 734 nm for ABTS. This on-line HPLC/ABTS analysis method was validated for specificity, linearity, precision and accuracy in compliance with international conference on harmonization (ICH) guideline.