• Title/Summary/Keyword: 용출용매

Search Result 183, Processing Time 0.038 seconds

Quality Characteristics of Domestic Strong Wheat Flour (시판 강력분 우리밀의 품질 특성)

  • Kwak, Han Sub;Kim, Mi Jeong;Kim, Oui-Woung;Kim, Sang Sook
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.5
    • /
    • pp.616-621
    • /
    • 2017
  • The objective of this study was to investigate the physicochemical properties of domestic strong wheat flour (DSWF). Three commercial DSWFs (D1, D2, and D3) were compared with imported strong wheat flour (ISWF). DSWFs had higher moisture content, crude protein content, lightness, and whiteness than ISWF. DSWFs showed lower solvent retention capacity and water absorption index than ISWF. DSWFs also showed significantly higher water solubility index than ISWF (P<0.05). Setback values by rapid visco analysis were significantly higher in D1 and D2 than in ISWF and D3, which means ISWF and D3 were better in retarding retrogradation. Differential scanning calorimetry results showed that ISWF required 6.2 J/g of energy for phase transition, whereas DSWFs needed 6.67~7.13 J/g. The farinograph results showed that ISWF had higher water absorption, longer dough stability time, and significantly higher softening of dough at 20 min than DSWF (P<0.05). Dough resistance and extensibility were higher in ISWF than in DSWFs.

Antimicrobial Activity of the Coriolus versicolor Liquid Culture Extracts Against Antibiotic Resistant Bacteria and Purification of Active Substance (구름버섯 균사체 배양 추출물의 복합내성 세균에 대한 항균활성 및 활성물질의 정제)

  • Lee, Jung-Sun;Kim, Taeg;Lee, Yoon-Hi;Jin, Cheng-Min;Kim, Hyun-Guell;Kim, Woo-Jung;Oh, Duek-Chul;Park, Yong-Il
    • The Korean Journal of Mycology
    • /
    • v.34 no.2
    • /
    • pp.92-97
    • /
    • 2006
  • The liquid culture extract of Coriolus versicolor was prepared by directly boiling the whole culture broth 7 days after incubation in 12% citrus extract medium. After removal of mycelial debris through filtration, this extract was further extracted with equal volume of ethyl acetate (1 : 1, v/v). The ethyl acetate extracts showed significant antibacterial activities against Stapylococcus aureus CCARM3230 and Psudomonas aeruginosa CCARM2171, which are resistant to several antibiotics. The most active fraction was eluted from a silica gel column with a mixture of dichloromethane and methanol (9 : 1, v/v) and the purity of this active substance was confirmed by HPLC analysis. The results suggest that the purified active substance could be a good source for the development of a new antimicrobial agent, especially for the treatment of antibiotic resistant bacteria.

K+ Ion-Selective PVC Membrane Electrodes with Neutral Carriers (중성운반체를 이용한 K+ 이온선택성 PVC막 전극)

  • Kim, Yong-Ryul;Cho, Kyoung-Sub;Kang, An-Soo
    • Applied Chemistry for Engineering
    • /
    • v.9 no.5
    • /
    • pp.734-741
    • /
    • 1998
  • Electrode characteristics were studied in the interface between sample solutions and $K^+$ ion selective PVC membrane electrodes containing neutral carriers, dibenzo-18-crown-6(D18Cr6) and valinomycin(Val). The effect of doping of base electrolytes, the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, and concentration variation of sample solution on the response characteristics of electrode such as the measured Nernstian slope, the detection limit, the linear response range, and potentiometric selectivity coefficients, were studied. In order to synthesize the membrane D18Cr6 and Val as neutral carriers were used, and complex between the carrier and $K^+$ ions were used as active materials. PVC membrane electrodes were made of plasticizers (DBP, DOS, and DBS), the base electrolyte[potassium tetraphenylborate(KTPB)], and solvent(THF). The chemical structure of carrier D18Cr6 was best for electrode and ideal electrode characteristics were appeared especially in case of doping of TPB. The optimum carrier content was about 3.23 wt % in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the electrode characteristics was improved. But its characteristics were lowered below the optimum membrane thickness because of the elution of carrier, deterioration of membrane strength, etc. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were in the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.

  • PDF

Biological Activity in Functional Cosmetic of Purple Sweet Potato Extracts (자색 고구마추출물의 기능성 화장품 활성)

  • Choi, Jae-Hong;Kim, Jin-Sung;Jo, Bun-Sung;Kim, Jeung-Hoan;Park, Hye-Jin;An, Bong-Jeun;Kim, Myung-Uk;Cho, Young-Je
    • Food Science and Preservation
    • /
    • v.18 no.3
    • /
    • pp.414-422
    • /
    • 2011
  • The optimum condition for phenolics contents extraction from purple sweet potato was 12 hrs. in 50% ethanol. The electron donating scavenging activities (DPPH), ABTS radical cation decolorization (ABTS) and antioxidant protection factor (PF) of Jami, Yeonjami and Shinjami were higher than general sweet potato, and thiobarbituric acid reaction substance (TBARs) was below 30%. The minimum inhibitory concentration (MIC) against Staphylococcus aureus and Escherichia coli on skin were each 5,000 and 2,500 ppm in all purple sweet potatoes, and MIC of Jami was the lowest as 2,500 ppm against Staphlococcus epidermidis. The whitening (tyrosinase inhibitory) activity of purple sweet potatoes was the highest as 62.5% and 48.7% in Jami water and ethanol extracts. The anti-inflammation (hyaluronidase inhibitory) activity of purple sweet potatoes was the highest as 25.3% and 94.4% in Jami water and ethanol extracts. The safety of cosmetic with Jam; extracts was assessed by various safety profiles. pH and viscosity change of essence for 90 days was not detected. Cosmetic was stable to temperature and light for 90 days. The result to measure changes of skin color and pore size of the skin was that an aged skin was more effective than young skin.

The Study on Removing Paraloid B-72 from Painting Layer on Mural of Mireukjeon Hall at Geunsansa Temple (금산사 미륵전 벽화 채색층의 Paraloid b-72 제거방법과 안정성에 관한 연구)

  • Jin, Byung-Hyuk;Cho, Jae-Yeon;Park, Jin-Yeon;Han, Sung-Hee;Kim, Yong-Sun
    • Korean Journal of Heritage: History & Science
    • /
    • v.50 no.3
    • /
    • pp.88-109
    • /
    • 2017
  • As the technique to remove Paraloid B-72, which is known as an irreversible material, the method using organic solvent and heating, though the ways vary depending on the kind of material to be removed, has been usually used, but it has yet to apply to mud mural because of the technical limit in processing and the potential risk of damage and, moreover, the removal efficiency which also remains unproven. Thus, in a bid to seek the way to safely remove Paraloid B-72 contained in mural, the test was conducted in a way of applying a compress method, which is deemed most efficient. The solvents which are proven to be Paraloid B-72 were applied to the absorbents such as active carbon fiber and methyl cellulose and then were eluted to the surface of mud mural sample which was prepared in the same size and condition for a certain time before evaluating the stability and removal efficiency. Such test was intended to identify the applicability to the mural of Mireukjeon Hall at Geunsansa Temple, which had been treated with Paraloid B-72 for preservation in the past. As a result, the way of mixing the absorbent such as active carbon fiber and Xylene alone or with other quick vaporable solvents proved to be most efficient in removing Paraloid B-72 from mud mural and particularly Acetone:Xylene(1:1wt%) was found to be the most stable among others. Such a test outcome is expected to be a useful data for removing Paraloid B-72 from the mural of Mireukjeon Hall at Geunsansa Temple as well as for restoring other mural cultural assets in the coming days.

Antimicrobial Activity of Aqueous Ethanol Extracts of Perilla frutescens var. acuta Leaf (차조기의 에탄올과 물 혼합 추출물의 항균활성)

  • Kim, Mi-Hyang;Lee, Nan-Hee;Lee, Myung-Hee;Kwon, Dae-Jun;Choi, Ung-Kyu
    • Journal of the Korean Society of Food Culture
    • /
    • v.22 no.2
    • /
    • pp.266-273
    • /
    • 2007
  • This study was conducted to examine the antimicrobial activity of Perilla frutescens var. acuta leaf fractions extracted with a mixture of ethanol and water. The Ca and Mg contents of the leaf were 595.75 mg% and 467.0 mg%, respectively, and they were the highest among all of the test minerals. The extract yield increased w e content of water in e extraction solvent. Antimicrobial activity against Staphylococcus aureus, Bacillus subtilis and Pseudomonas aeruginosa was found in the 50,70 and 95% ethanol extracts. Of the various fractions extracted from the mixture of ethanol and water, the ethyl acetate fraction showed antibacterial activity against all microorganisms tested in this experiment, and the antibacterial activity of ethyl acetate fraction from the water extract was the strongest. The phenol and flavonoid content in the ethyl acetate fraction showed no correlation with the concentration of ethanol in the extract solvent; however, their contents were higher in the 30% ethanol and water extraction which the antimicrobial activity of the extract was the strongest.

Nutritional and Organoleptic Evaluations of the By-products from Chlorella vulgaris after Lipid Extraction (Chlorella vulgaris의 지질 추출 후 부산물의 영양학적 및 관능적 평가)

  • Oh, Sung-Ho;Choi, Woon-Yong;Seo, Yong-Chang;Kim, Ga-Bin;Lee, Shin-Young;Jeong, Kyung-Hwan;Kang, Do-Hyung;Lee, Hyeon-Yong
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.39 no.6
    • /
    • pp.920-926
    • /
    • 2010
  • Marine alga, Chlorella vulgaris, was extracted by chloroform-methanol (2:1, v/v) solvents for lipid extraction at $35^{\circ}C$ for five hours (HCM-35) and its process was compared with conventional lipid extraction condition such as chloroform-methanol (2:1, v/v) at $65^{\circ}C$ for one hour (CM-65). This low temperature extraction process showed that 80% of total lipid was extracted and its residues contained relatively unchanged amounts of intact proteins and other minerals as well as amino acid profiles. Interestingly enough, the weight fraction of carbohydrate in the residues slightly increased due to less denaturation at low process temperature. The biological activities of the residues such as cytotoxicity and immune cell growth activation were not much changed after being extracted. The sensory evaluation were found to be very favorable for being used as a food additive and/or food supplement. This result could also help to maintain the economic feasibility of utilizing marine resources in food and other relevant industries.

Identification of Flavonoids from Extracts of Opuntia ficus-indica var. saboten and Content Determination of Marker Components Using HPLC-PDA (손바닥선인장 추출물의 플라보노이드 구조 규명 및 HPLC-PDA를 이용한 지표성분의 함량 분석)

  • Park, Seungbae;Kang, Dong Hyeon;Jin, Changbae;Kim, Hyoung Ja
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.46 no.2
    • /
    • pp.210-219
    • /
    • 2017
  • This study aimed to establish an optimal extraction process and high-performance liquid chromatography (HPLC)-photodiode array (PDA) analytical method for determination of marker compounds, dihydrokaempferol (DHK) and 3-O-methylquercetin (3-MeQ), as a part of materials standardization for the development of health functional foods from stems of Opuntia ficus-indica var. saboten (OFS). The quantitative determination method of marker compounds was optimized by HPLC analysis, and the correlation coefficient for the calibration curve showed very good linearity. The HPLC-PDA method was applied successfully to quantification of marker compounds in OFS after validation of the method in terms of linearity, accuracy, and precision. Ethanolic extracts from stems of O. ficus-indica var. saboten (OFSEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 50, 70, and 80% ethanol for 3, 4, 5, and 6 h. Among OFSEs, OFS70E at $80^{\circ}C$ showed the highest contents of DHK and 3-MeQ of $26.42{\pm}0.65$ and $3.88{\pm}0.29mg/OFS100g$, respectively. Furthermore, OFSEs were determined for their antioxidant activities by measuring 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and lipid peroxidation (LPO) inhibitory activities in rat liver homogenate. OFS70E at $70^{\circ}C$ showed the most potent antioxidant activities with $IC_{50}$ values of $1.19{\pm}0.11$ and $0.89{\pm}0.09mg/mL$ in the DPPH radical scavenging and LPO inhibitory assays, respectively. To identify active components of OFS, various chromatographic separation of OFS70E led to isolation of 11 flavonoids: dihydrokaempferol, dihydroquercetin, 3-O-methylquercetin, quercetin, isorhamnetin 3-O-glucoside, isorhamnetin 3-O-galactoside, narcissin, kaempferol 7-O-glucoside, quercetin 3-O-galactoside, isorhamnetin, and kaempferol 3-O-rutinoside. The results suggest that standardization of DHK in OFSEs using HPLC-PDA analysis would be an acceptable method for the development of health functional foods.

Inhibitory Effects of Ethanolic Extracts from Aster glehni on Xanthine Oxidase and Content Determination of Bioactive Components Using HPLC-UV (섬쑥부쟁이 에탄올 추출물의 잔틴산화효소 저해 효능 및 HPLC-UV를 이용한 유효성분의 함량 분석)

  • Kang, Dong Hyeon;Han, Eun Hye;Jin, Changbae;Kim, Hyoung Ja
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.45 no.11
    • /
    • pp.1610-1616
    • /
    • 2016
  • This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

Monitoring of Heavy Metals Migrated from Polylactide (PLA) Food Contact Materials in Korea (국내 유통 폴리락타이드(PLA) 식품용 기구 및 용기·포장의 중금속 이행량 모니터링)

  • Kim, Hyeonuk;Park, So-Yeon;Jo, Ye-Eun;Park, Yongchjun;Park, Se-Jong;Kim, Meehye
    • Journal of Food Hygiene and Safety
    • /
    • v.33 no.2
    • /
    • pp.102-109
    • /
    • 2018
  • In the present study, a variety of polylactide (PLA) articles (n = 211) were tested for migration of lead (Pb), cadmium (Cd) and arsenic (As) into the food simulant (4% v/v acetic acid). Pb, Cd, and As were analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Migration tests were performed at $70^{\circ}C$ and $100^{\circ}C$ for 30 min. The amounts of Pb, Cd, and As increased at $100^{\circ}C$ for 30 min compared with levels at $70^{\circ}C$. However, the migration at both conditions was very low. The maximum level of Pb at $100^{\circ}C$ for 30 min corresponded to 1% of the migration limit. The estimated daily intakes (EDI) based on safety evaluation ranged from $2.5{\times}10^{-5}$ to $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$ for Pb, Cd, and As. The EDI calculated from migration of Pb at $100^{\circ}C$ for 30 min in PLA was the maximum value, $2.0{\times}10^{-3}{\mu}g/kg\;bw/day$, which corresponded to 0.055% of provisional tolerable weekly intake (PTWI, $25{\mu}g/kg\;bw/week$). The data from this study represent a valuable source for science-based safety control and management of hazardous heavy metals migrating from polylactide food contact materials.