• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.3
• /
• pp.173-183
• /
• 2006

Purpose of this study was to estimate of soil erosion, which is related with crop productivity and water quality in watershed, in Seonakdong river watershed using USLE. The data set for USLE estimation were derived from detailed digital map(K factor), satellite imagery(C and P factors) and DEM(LS factor). The R factor was calculated by AWS data from Kimhae agricultural technology center. The soil loss from arable land was equivalent of 31.5% of total soil loss in Seonakdong river watershed. The soil loss amount of paddy field and upland were 2.8% and 97.2% of arable land, respectively, even in the area where paddy field was occupied much largely as 76.3%. The reason of large amount of soil loss from upland was that 30.4% of upland was distributed at "severe" and "very severe" soil erosion grade in watershed. The distribution of soil erosion grade during cropping season(May-Sept.) was similar to the annual soil loss. Soil erosion of non-cropping season(Oct.-Apr.) was small due to a low R factor. But, soil erosion grade of near mountain footslope areas showed severe and very severe even in non-cropping season.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.24-31
• /
• 2016

The increase of impervious area in cities caused the unbalanced water cycle system and the accumulated various contaminants, which make troubles as introducing into watershed. In Korea, most of rainfall in a year precipitate in a summer season. This indicate that non-point source pollution control should be more important in summer and careful rainfall reuse strategy is necessary. Accordingly, the aim of this study is to monitor the characteristics of rainfall contaminants harvested in roofs and to develop the rainfall treatment system which are designed to fit well in a typical domestic household including rain garden. The rain garden consists of peatmoss, gravel and san to specially treat the initial rainfall contaminants. For this purpose, lab scale experiments with synthetic rainfall had been conducted to optimize the removal efficiency of TN, TP and CODcr. After lab scale experiments, field scale rainfall treatment system installed as a pilot scale in a field. This system has been monitored during June to July in 2015 in four time rainfall events as investigating the function of time, rainfall, and pollutant concentrations. As results, high loading of pollutants were introduced to the rainfall treatment system and its removal efficiency is increased as increase of pollutant concentrations. Since it is common that the mega-size of rainfall treatment system is not attractive in urban area, small scale rainfall treatment system is promising to treat the non-point source contaminants from cities. In addition, this small scale rainfall treatment system could have a potential to water resue system in islands, which usually suffer the shortage of water.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.246-249
• /
• 1994

Shelf-life of pork packaged under $CO_{2}$ was observed and the optimal volume of $CO_{2}$ gas was determined. High gas barrier film, EVOH($CO_{2}$ permiability; 1 $cc/cm^{2}{\cdot}24\;h{\cdot}atm$) was used as packaging material and the volume ratios of sample to $CO_{2}$ of 1 : 1, 1 : 3 and 1 : 5 were tried using the control of vacuum packaged pork. To ev.3luate quality of pork cuts, total plate counts, TBA, color and sensory score were monitored during the storage at $4{\pm}1^{\circ}C$ for 31 days. TPC of vacuum packaged pork increased up to $4.6{\times}10^{6}\;CFU/cm^{2}$ in 24 days while that of $CO_{2}$ gas packaged pork $4.5{\times}10^{5}\;CFU/cm^{2}$ at the same storage period, and it took 7 days more for gas packaged pork to reach the same TPC count. There was no significant difference in TBA value between vacuum packaged and gas packaged pork. In the color L and a values were not affected by treatment but vacuum packaged pork cuts showed higher b value than gas packaged pork. According to sensory evaluation, gas packaged pork showed less off flavor, better flavor and freshness than vacuum packaged one (P<0.05).

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.252-260
• /
• 2012

The wetlands have eco-sociological values because their functions have proven to be useful to human society. Many countries are working to conserve and protect the wetland ecosystems. However, many wetlands have disappeared or have been fragmented due to a natural and/or anthropogenic disturbance. These isolated wetlands appear to work best in the landscape, as a spatially distributed system. We have analyzed the spatial-social distribution patterns of wetlands in Gyeongsangnam-do Province (GNP). We examined the frequency distribution of wetland sizes, the distances to the nearest wetlands, the shapes of the wetlands, land-use patterns, land owners, and official land values were confirmed as social characteristics for each wetland. A total of 146 wetlands (3,598.85 ha), including 76 riverine wetlands (1,955.60 ha), 49 palustrine wetlands (1,282.28 ha) and 21 mountain wetlands (1,282.28 ha) were identified in GNP. Most wetlands left for use to drainage were small (<2 ha) and located in agricultural areas. However, small and isolated wetlands were clustered, according to the location, indicating that these wetlands can be connected to each other using the linear riverine wetlands and water channels in agricultural areas. This is extremely valuable in maintaining the biodiversity, such that any loss of small wetlands will cause a direct reduction in the connectedness among populations of the remaining species. Due to most wetlands belonging to the nation or businesses, being classified as reservoirs (water storage areas), and consequently, degradation of wetlands will progress due to grand-scale engineering works. Therefore, wetland policy and ecologically sensitive laws and policies should be developed in order to promote the wise-use for wetlands.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.63-68
• /
• 2016

This study was performed to assess the microbiological quality of Brassica campestris var. narinosa microgreen from harvesting and processing steps. The samples were analyzed for total viable cell counts (TVC), coliforms, Enterobacteriaceae, Escherichia coli, Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus, Bacillus cereus, and Staphylococcus aureus. The total viable counts of microgreen (whole leaves) and environment samples from harvesting steps were higher than 6.8 log CFU/g and the contamination level of coliforms in the samples were 3.2 log CFU/g and 3.5 log CFU/g of microgreen and soil, respectively. In case of microgreen samples collected from processing steps, the contamination level of TVC and coliforms were higher in raw materials than samples obtained from later stages of processing, i.e. washing, drain, and final products. The contamination levels of B. cereus in raw materials and environments decreased approximately 1.4 log CFU/g in final products. S. aureus was detected in soil samples but Salmonella spp., Listeria monocytogenes, Vibrio parahaemolyticus and pathogenic E. coli was not detected. In order to identify the sources of contamination for microgreen, the genetic similarity of B. cereus isolates obtained from harvesting and processing steps were compared using the repetitive-sequence-based polymerase chain reaction method. B. cereus isolates obtained from harvesting environments and microgreen were clustered with a similarity greater than 95%. In case of B. cereus isolates obtained from microgreen and environmental samples at processing steps showed low genetic similarity.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.2
• /
• pp.35-43
• /
• 2011

Permeable Reactive Barriers (PRB) method is an economical method that does not require any other methods to be operated once it is installed as it controls of groundwater flow in the barrier, which is inserted a reactive material on the way of pollutant. The major dominant element of PRB is a reactive material in the reactive wall, and such factors as purification efficiency and used time based on the chemical and physical features in between the reactant and pollutant. High purification efficiency can be expected when a rational design that is synthetically considered in features of packing density, operation period, and adsorption reactant of pollutant. A column test was conducted for an application test using CFW as its adsorption reactant in order to remove copper($Cu^{2+}$) in the PRB system. The CFW was used for the reactant and selected inflow speed, density and thickness of PRB as its necessary factors for design of PRB. As a result of the experiment, the removal efficiency decreased as operating time of PRB increased and the efficiency linearly increased upon the length. Therefore, it is confirmed that the thickness of reactive materials in PRB system can be designed using the proposed formula considering purification time and density of CFW.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.9-19
• /
• 2003

Membrane process was investigated to recover process water and valuable gold from washing water of electroless PCB plating processes. The filtration experiments were carried out using not only a RO membrane test cell to determine suitable membrane for washing water but also spiral wound membrane modules of nanofiltration and reverse osmosis for scale-up. At first, RO-TL(tap water, low pressure), RO-BL(brackish water, low pressure) and RO-normal(for water purifier) sheet membranes made by Saehan Co. were tested, and the performance of RO-TL membrane showed most suitable f3r recovery of soft etching, catalyst and Ni washing waters. As a result of RO test cell, the experiments for scale-up were carried out using RO-TL modules far water purifier at 7bar and $25^{\circ}C $The permeate flux fur Au washing water was about 30 LMH, but Au rejection was less than 80%. The permeate fluxes for Pd, Ni and soft etching washing water were about 22, 17 and 10 LMH, respectively. The Pd, Ni and Cu rejections showed more than 85, 97 and 98% respectively. The nanofiltration module for water purifier was introduced to recover Au selectively from Au, Ni and Cu ions in Au washing water. Most of Ni and Cu ions in the feed washing water were removed, and only Au ion was existed 81.9% in the permeate. Furthermore, Au ion in the permeate was concentrated and recovered by RO-TL membrane module. Finally, Au was also able to recover effectively by using 4 inch diameter spiral wound modules of NF and RO-TL membranes, in series.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.637-643
• /
• 2012

This study was carried out to investigate how reversible and irreversible fouling were distributed in the filtration using ceramic membrane of 300 kDa pore size for secondary effluent of wastewater. It was performed by calculating fouling as numerical method for diverse TMPs and measured F-EEM and SEC for raw water, treated water and backwashed water. Water quality was also checked to know whether treated water quality was stable or not. The results showed that reversible fouling formation was increased when lower TMP was applied and it is caused by protein like organic matters having higher molecular weights. The secondary wastewater effluent had diverse molecular weight materials, especially contaminants lower than 0.5 kDa and bigger than 12 kDa. Decreasing TMP induced contaminants above 12 kDa and below 1 kDa to become reversible fouling.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.405-416
• /
• 2017

This study evaluated a model unconfined aquifer comprising a sand or gravel layer, a filter layer, a pumping well, and an observation well. The model was employed in step drawdown tests and then used to assess the permeability of each test tank. The optimal yield and well efficiency were then calculated. Evaluation of yield by step in sand layer filters of equal thickness gave optimized watering rates of 22.03 L/min in the double filter and 19.71 L/min in the single filter. The double filter's yield was 115.0% that of the single filter. A comparison of double and single filters, each 10 cm thick, showed the double filter to have a maximum yield of 182.7%. Yields for the gravel layer were 73.56 L/min for a double filter and 65.47 L/min for a single filter of the same thickness; the former value is 112.3% of that of the latter. Comparison of double and single filters with 10-cm-thick gravel layers revealed that the double filter had a maximum yield of 160.9%. Results for sand wells showed the double filter to have a maximum efficiency of 70.4% and the single filter to have a minimum efficiency of 37.1%. Gravel-layer well efficiencies were >66.5% for both double and single filters (each 30 cm thick), but only 22.5% for a 10-cm-thick single filter. This study confirms that permeability improved as the filter material became thicker; it also shows that a double filter has a higher yield and well efficiency than a single filter. These results can be applied to the practical design of wells.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.