• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.5
• /
• pp.439-444
• /
• 2009

This paper presents an efficient contact detection algorithm for the plane elastostatic contact problem of the boundary element method(BEM). The data structures of the boundary element method are dissected to develop an efficient contact detection algorithm. This algorithm is consists of three parts as global searching, local searching and contact relation setting to reflect the corner node problem. Contact master and slave type elements are used in global searching step and quad-tree is selected as the spatial decomposition method in local searching step. To set up contact relation equations, global contact searching is conducted at node level and local searching is performed at element level. To verify the efficiency of the proposed contact detection algorithm of BEM, numerical example is presented.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.145-155
• /
• 1996

This paper suggests a new algorithm of automatic mesh generation over planar domains with arbitrarily shaped boundaries and control curves. The algorithm is based on the method of recursively subdividing the domain by the path connecting, with minimum penalty value, two points on the super-loop, which consists of the boundaries and the control curves, The algorithm is not subject to any limitation on the shape of the domain, and its process can be fully automated. Therefore, this algorithm can be implemented into computer programs which require minimal user intervention while generating finite element meshes over complicated domains. This algorithm can also be easily extended for application to the generation of meshes over curved surfaces, or to the adaptive mesh generation.

• The Journal of Information Technology
• /
• v.4 no.3
• /
• pp.65-75
• /
• 2001

Code-division multiple access has been widely accepted as the major multiple access scheme in mobile communication systems. Wide-band CDMA and its hybrid associate time-division CDMA are key elements in the mobile communication. Since 10 years ago, there has been enormous research activity in analysis of the capacity of these CDMA-based systems. Recently, upgrading service, high quality and the different service classes in radio resource allocation has recently increased. This paper presents an overview of Radio Resource Allocation on the CDMA-based systems that are flexible, support traffic services, minimize call blocking rate and have acceptable radio resource utilization.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.359-364
• /
• 2014

In this paper, we propose a method for extracting a road area by using the mean-shift method and connected-component method. Mean-shift method is very effective to divide the color image by the method of non-parametric statistics to find the center mode. Generally, the feature points of road are extracted by using the information located in the middle and bottom of the road image. And it is possible to extract a road region by using this feature-point and the partitioned color image. However, if a road region is extracted with only the color information and the position information of a road image, it is possible to detect not only noise but also off-road regions. This paper proposes the method to determine the road region by eliminating the noise with the closing / opening operation of the morphology, and by extracting only the portion of the largest area using a connected-components method. The proposed method is simulated and verified by applying the captured road images.

• Composites Research
• /
• v.36 no.6
• /
• pp.395-401
• /
• 2023

In this study, finite element modeling of unidirectional composite materials of the computed tomography (CT) was conducted using a supervised learning-based segmentation technique. Firstly, Micro-CT scan was performed to obtain the raw volume of unidirectional composite materials, providing microstructure information. From the CT volume images, actual microstructure of the cross-section of unidirectional composite materials was extracted by the labeling process. Then, a U-net deep learning model was trained with a small number of raw images as inputs and their labeled images as outputs to generate a segmentation model. Subsequently, most of remaining images were input to the trained U-net deep learning model to segment all raw volume for identifying complex microstructure, which was used for the generation of finite element model. Finally, the fiber volume fraction of the finite element model was compared with that of experimentally measured volume to validate the appropriateness of the proposed method.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.401-404
• /
• 2006

Mean shift procedure is applied for the data points in the joint spatial-range domain and achieves a high quality. However, a color image is segmented differently according to the inputted spatial parameter or range parameter and the demerit is that the image is broken into many small regions in case of the small parameter. In this paper, to improve this demerit, we propose the method that groups similar regions using region merging method for over-segmented images. The proposed method converts a over-segmented image in RGB color space into in HSI color space and merges similar regions by hue information. Here, to preserve edge information, the proposed method use by merging constraints to decide whether regions is merged or not. After then, we merge the regions in RGB color space for non-processed regions in HSI color space. Experimental results show the superiority in region's segmentation results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.994-1003
• /
• 2018

The clamping characteristics of segmented nuts in pyrotechnic separation nut are investigated using finite element analysis. When the segmented nuts are used to clamp objects, a constraint cylinder is necessary to prevent the segmented nuts from spreading out to the radial direction. During the manufacturing process, a clearance is usually introduced between the outer diameter of the segmented nuts and the inner diameter of the constraint cylinder. Therefore to find out the effect of the clearance, proper finite element modeling method is suggested to describe the clamping procedure appropriately. In addition, finite element analysis with the clearance of 0.00, 0.03, 0.06, and 0.10 mm are performed. From the analysis results, the clamping characteristics of segmented nuts are investigated according to the clearance, and several factors which should be considered to design a reliable pyrotechnic separation nut are figured out.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1970_1971
• /
• 2009

한의학에서 혀는 장부의 건강 상태를 표면적으로 보여주는 중요한 요소 중의 하나이다. 특히 장부가 혀의 영역에 연결이 되어 각 장부의 특성을 파악하는데 매우 요긴하게 사용되고 있다. 이 연구에서는 비침습적으로 카메라와 조명 장치를 이용한 설진기를 이용하여 객관적으로 혀 영역을 촬영하고 진단을 위한 혀 영역의 객관적인 지표를 자동으로 찾는 방법을 개발하는 것을 목표로 한다. 이를 위해서 가장 중요한 일은 혀의 컬러 요소를 파악하여 정확한 위치를 찾아내는 것이다. 컬러를 색상, 채도, 명암으로 분해하고 지역 영역의 히스토그램을 분석하여 분할 임계값을 선택, 전체 영역을 분할한다. 결론적으로 이 방법은 설태가 있는 영역을 찾아내고 설태의 종류를 구분하는 방법을 제안하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1099-1102
• /
• 2005

다중서명에서는 보안적 요소뿐만 아니라 다중서명의 길이, 다중서명의 생성 및 검증 시간, 복호화 시간, 통신량 등도 중요한 요소이다. 기존의 RSA를 그대로 이용한 RSA 원형 다중서명 방식과 RSA를 변형하여 적용한 RSA 변형 다중서명 방식은 다중서명의 생성 및 검증 시간이 각각의 개인서명을 생성하고 검증하는 시간의 합과 비례하여 증가한다는 문제점이 있다. 본 논문은 서명자의 수만큼 분할된 각각의 부분메시지에 대해 RSA 방식을 이용하여 제각기 서명하는 다중서명 방식을 제안한다. 제안된 메시지 분할을 이용한 RSA 다중서명 방식은 블록의 수가 증가하지 않는 경우 기존 방식에 비해 다중서명의 길이가 증가하지 않으면서, 다중서명의 생성 및 검증 시간이 각각 $\frac{1}{L}$로 감소하고, 복호화 시간과 통신량은 각각 약 $\frac{1}{2}{\sim}\frac{1}{L}$로 감소한다.

• Computational Structural Engineering
• /
• v.17 no.2
• /
• pp.42-49
• /
• 2004

강체스프링 모델은 분할된 요소를 강체라고 가정하고, 각 요소는 스프링 시스템을 연결되어 있다고 생각하여 구조물을 해석하는 방법이다. 먼저 보의 휨 문제에 대한 강체스프링 모델의 개념을 설명하고자 한다. (중략)