• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.21-30
• /
• 2002

A preconditioned Navier-Stokes code was parallelized by the domain decomposition technique, and the accuracy of the parallelized code was verified through a comparison with the result of a sequential code and experimental data. Parallel performance of the code was examined on a Myrinet based PC-cluster and a Fast-Ethernet system. Speed-up ratio was examined as a major performance parameter depending on the number of processor and the network communication topology. In this test, Myrinet system shows a superior parallel performance to the Fast-Ethernet system as was expected. A test for the dependency on problem size also shows that network communication speed in a crucial factor for parallel performance, and the Myrinet based PC-cluster is a plausible candidate for high performance parallel computing system.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.3
• /
• pp.41-48
• /
• 2014

Experimental study of sedimentation and self-weight consolidation has been primary research area in dredged soil. However, good quality of the dredged soil and minimum water pollution caused by the pumping of reclaimed soil require intensive study of the flow characteristics of dredged material due to dumping. In this study, continuity and the equilibrium equations for mass flow assuming single phase was derived to simulate mass flow in dredged containment area. To optimize computation and modeling time for three dimensional geometry and boundary conditions, depth integration is applied to governing equations to consider three dimensional topography of the site. Petrov-Galerkin formulation is applied in spatial discretization of governing equations. Generalized trapezoidal rule is used for time integration, and Newton iteration process approximated the solution. DG and CDG technique were used for weighting matrix in discontinuous test function in dredged flow analysis, and numerical stability was evaluated by performed a square slump simulation. A comparative analysis for numerical methods showed that DG method applied to SU / PG formulation gives minimal pseudo oscillation and reliable numerical results.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.790-793
• /
• 2008

Recently, Intelligent Excavating System(IES) for earthwork automation is on progress since the end of 2006 as a part of construction technology innovation projects in Ministry of Land, Transport and Maritime Affairs. Task Planning System(TPS), one of the detail core technologies of IES, is an optimal work planning system in conditions of effectiveness, safety and economic efficiency by analyzing the work environment data based on earthwork design and work environment recognition technology. For effective earthwork planning, the location of platform must be the most optimal spot for minimization of time, maximization of productivity and reduction of overlapped work spaces and unnecessariness. Besides, the decision of optimal platform location is to be based on the specifications and then is able to be converted with the local area calculation algorithm. This study explains the decision of optimal platform location on the basis of local area from the work space separate process and judges the effectiveness.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.41-51
• /
• 2002

Recently, many studies extracting the geography information using digital aerial image have been implemented. But it is very difficult that automatically recognizing objects using edge detection method on the aerial image, and so that work have practiced manually or semi-automatically. Therefore, in this study, we have removed impedimental elements for recognition using the image which overlapped the significant information bands of brightness-sliced aerial images, then have developed the algorithm which can automatically recognize and extract road information and we will try to apply that method when we develope a system. For this, first of all, we have developed the 'template conformal-transformation moving operator' for automatically recognizing crosswalk area from crosswalk band image and the 'window normal search algorithm' which is able to track road area based on long-side length of crosswalk, so that we have proposed the method that can extract directly the road information from the aerial image.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.44-51
• /
• 2009

Text understand in natural images has become an active research field in the past few decades. In this paper, we present an automatic recognition system in Korean signboards with a complex background. The proposed algorithm includes detection, binarization and extraction of text for the recognition of shop names. First, we utilize an elaborate detection algorithm to detect possible text region based on edge histogram of vertical and horizontal direction. And detected text region is segmented by clustering method. Second, the text is divided into individual characters based on connected components whose center of mass lie below the center line, which are recognized by using a minimum distance classifier. A shape-based statistical feature is adopted, which is adequate for Korean character recognition. The system has been implemented in a mobile phone and is demonstrated to show acceptable performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2982-2988
• /
• 2014

The edge detection is a pre-processing of such as image segmentation, image recognition, etc, and many related studies are being conducted both in domestic and abroad. Representative edge detection methods are Sobel, Prewitt, Laplacian, Roberts and Canny edge detectors. Such existing methods are possible for superb detections of edges if edges are detected from videos without noises. However, for video degraded by the salt-and-pepper noise, the edge detection characteristic is shown to be insufficient due to the noise influence. Therefore, in this study, the area is separated as the top, down, left and right from the mask's center pixel first to acquire a superb edge detection characteristic from the video damaged by the salt-and-pepper noise. And the algorithm that detects the final edge by applying the directional mask on the assumed factor of mask that is obtained according to the result of determination for the noise status of representative pixel value of each area.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.235-245
• /
• 2012

This paper introduce a quiz game contents based on gesture interface. We analyzed the off-line quiz games, extracted its presiding components, and digitalized them so that the proposed game contents is able to substitute for the off-line quiz games. We used the Kinect camera to obtain the depth images and performed the preprocessing including vertical human segmentation, head detection and tracking and hand detection, and gesture recognition for hand-up, hand vertical movement, fist shape, pass and fist-and-attraction. Especially, we defined the interface gestures designed as a metaphor for natural gestures in real world so that users are able to feel abstract concept of movement, selection and confirmation tangibly. Compared to our previous work, we added the card compensation process for completeness, improved the vertical hand movement and the fist shape recognition methods for the example selection and presented an organized test to measure the recognition performance. The implemented quiz application program was tested in real time and showed very satisfactory gesture recognition results.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.131-139
• /
• 1992

By introducing a body potential, the high-oder spectal method of Dommermuth and Yue(1987) is extended to treat the nonlinear interactions between the free surface and the submerged cylinder. A 2-dimensional numerical wave tank is developed based on this numerical scheme, and applied to the wave resistance problem and the wave maker problem. In the simulations, it is shown that the transient waves due to the impulsive start of the body motion make a practical obstacle to the acquisition of useful data from the numerical experiments. Gradual starting procedures are devised, and successful result of the quasi-steady state or the uniform regular wave group was obtained. Within the author's present knowledge, the present numerical scheme is one of the most efficient numerical schemes which can treat the nonlinear interactions between the free surface and the body motion in time-domain.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.283-286
• /
• 2014

본 논문에서는 카메라형 OCR (Optical Character Reader) 기술을 이용해 오프라인 중고서점의 효율적 장서관리 시스템을 구축하기 위한 디지털 데이터화 관리시스템 방안을 제안한다. OCR은 광학적으로 인식할 수 있는 문자를 컴퓨터가 읽을 수 있도록 하는 기술이다. 원리적으로 문자 한 개를 수십 개의 모눈으로 분할해 특정한 모눈의 흑백 또는 자획형상 특징에 의해 문자를 판독한다. 이 논문에서는 OCR 기술을 활용함으로써 디지털 데이터화의 효과는 물론 적용 환경의 개선효과를 기대해 볼 수 있는 오프라인 중고서점 시장을 목표로 했다. 오프라인 중고서점에서 보유하고 있는 장서의 디지털 데이터화는 기업형 중고서점과의 경쟁에 있어서도 생존을 위해 필요한 요소이다. 카메라형 OCR 기술을 활용한 장서 디지털 데이터화는 오프라인 중고서점 판매자가 도서재고 검색 및 판매 관리 효율을 높이도록 도와줄 뿐 아니라, 도서판매 유형, 소비자 분석과 수요 예측을 가능하게 한다. 또한 소비자에게 오프라인 중고서점에서 보유하고 있는 희귀 장서와 중고서적들을 검색해 구입할 수 있는 편의를 제공할 것이다. 오프라인 중고서점 판매를 촉진하고 활성화시킨다면 출판의 선순환적 구조를 만드는 데 기여할 것으로 예상된다.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.385-396
• /
• 2005

In this paper, a new structural approach to on-line signature verification is presented. A primitive pattern is defined as a part segmented by a local minimal position of speed. And a structural description of signature is composed of subpatterns which are defined as such forms as rotation shape, cusp shape and bell shape, acquired by composition of the primitives regarding the directional changes. As the matching method to find identical parts between two signatures, a modified DP(dynamic programming) matching algorithm is presented. And also, variation and complexity of local parts are computed from the training samples, and reference model and decision boundary are derived from these. Error rate, execution time and memory usage are compared among the functional approach, the parametric approach and the proposed structural approach. It is found that the average error rate can be reduced from 14.2% to 4.05% when the local parts of a signature are weighted and the complexity is used as a factor of decision threshold. Though the error rate is similar to that of functional approaches. time consumption and memory usage of the proposed structural approach are shown to be very effective.