• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.12-17
• /
• 1997

In this work, we developed a new type ultrasonic dehumidifier with piezoelectric ceramics, which and efficiently repel waterdrops on outdoor glass plates exposed to raindrops. Through finite element analysis of a certain type of glass plates to analyze its dynamic behavior, the structure of the ultrasonic device we determined to get the optimal performance. A supplemental metal plate was attached to the glass plate for uniform cleaning. Based on the theoretical results, experimental samples were fabricated and evaluated with various dimensions of the glass plate and the piezoceramic vibrator. Driving circuit for the dehumidifier made use of the frequency sweeping technique to keep track of the resonant frequency of the glass plate that was variant with environmental conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.603-609
• /
• 1999

The effect of an external acoustic excitation on the wake structure behind a circular cylinder was experimentally investigated. The sound wave was excited in the frequency range of the shear layer instability and two sound pressure levels of 114 and 120dB were used in this study. As a result, the acoustic excitation modified the wake structure by increasing the velocity fluctuation energy without changing the vortex shedding frequency. The acoustic excitation enhanced the vortex shedding process and promoted the shear layer instability. Consequently, the acoustic excitation reduced the length of the vortex formation region and decreased the base pressure. In addition, the vortex strength of vortices was increased and the width of the wake was spread out due to the acoustic excitation. When the excitation frequency was identical to the shear layer instability frequency, the effect of the external flow control on the cylinder wake was maximized. In addition, with increasing the sound pressure level, the effect of the external acoustic excitation on the wake structure increased.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.4
• /
• pp.31-43
• /
• 1987

As a study on Speaker-Independent Isolated Word Recognition, a Modified ISODATA clustering method is proposed. This method simplifies the outlier processing and the splitting procedure in conventional ISODATA algorithm, and eliminates the lumping procedure. Through this method, we could find cluster centers precisely and automatically. When this method applied to 11 digits by 10 males and 4 females, its recognition rates of $84.42\%$ for K=4 were better than those of the latest Modified K-means, $82.5\%$. Judging from these results, we proved this method the best method in finding cluster centers precisely.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.357-360
• /
• 2002

혈관에 흐르는 혈류 속도의 측정은 혈압 및 심박수와 관련된 혈류의 역학적 변화를 관찰하는 데 있어서 주로 사용되는 방법 중의 하나이다. 이 혈류 속도는 일반적으로 도플러 효과에 의하여 주파수가 변화하는 현상을 이용하여 추정하게 된다. 그런데 기존의 주파수 추정 방법들은 시불변 시스템을 가정하고 있지만 실제 혈관 속은 혈구가 일정하지 않은 속도를 갖는 시변 시스템이라 할 수 있기 때문에 이러한 시변 특성이 강한 경우 기존의 방법을 이용하게 되면 그 성능이 저하되는 경향을 보인다. 또 피시험자의 몸 상태에 따라서 서로 다른 주파수 변화 추이를 보이므로 하나의 고정 변수로써 최적화된 성능을 기대하기도 어렵다. 그러므로 본 논문에서는 시변 시스템에서 좋은 성능을 갖는 가변 망각 인자(variable forgetting factor, VFF)를 사용한 순환적인 완전 최소 자승법(recursive total least squares, RTLS) 기법을 이용한 주파수 추정 방법을 제안한다. RTLS란 TLS 기법을 순차적으로 계산하는 방법으로 시변 적응력을 향상시키는 방법이다. 또한 이 기법에 가변 망각 인자(VFF)를 적용시키는 것은 시변 시스템에서 외부적인 변화에 대하여 좀더 효율적으로 대응할 수 있기 위함이다. 기존의 방법과 성능 비교를 위하여 컴퓨터 시뮬레이션을 하였으며 그 결과 시변 시스템에서 본 논문에서 제안한 VFF를 이 용한 RTLS 기법이 보다 향상된 성능을 가지고 있음을 확인 할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.273-279
• /
• 2012

In this thesis, a nonlinear compression fitting method was studied for each frequency channel of a 64 channel digital hearing aid. Unlike conventional fitting formula method done from the result of the hearing loss test, the present fitting method uses the auditory threshold of sound pressure measured near the tympanic membrane while ITE (In-The-Ear) hearing aid is fitted into the user's ear canal. Also, the spectral distribution of the voice sound pressure was used for realizing of output sound pressure compression curves against input sound pressure level. Theoretical research results of FFT-iFFT compression algorithm has been evaluated by experimental gain measurements at each different input sound pressure level 50 dB, 70 dB, 90 dB respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.78-82
• /
• 2019

This paper addressed the spectrum of ultrasonic waves produced by arc and/or coronal discharge inside the switchboard. Portable ultrasound sensors are useful for detecting discharge phenomena, such as coronal means in electrical systems. However, a typical handheld ultrasound detector has a disadvantage of determining the type of problem by listening to the sound characteristics and predicting the results, as a result of the determination of whether a discharge is present. Therefore, a new method of analysis is required to distinguish ultrasonic characteristics. In this paper, we published an ultrasound analysis case study to visualize the sound of ultrasonic waves measured with ultrasonic sensors. From the results of the experiment, it was possible to detect coronal discharge and serial arc discharge without interference by the ultrasonic detection system.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.333-338
• /
• 2006

This paper proposes an improved do-noising method using multi-thresholding function based on translation-invariant (W) wavelet proposed by Donoho et al. for underwater radiated noise measurement. The traditional wavelet thresholding de-noising method causes Pseudo-Gibbs phenomena near singularities due to discrete wavelet transform. In order to suppress Pseudo-Gibbs Phenomena, a do-noising method combining multi-thresholding function with the translation-invariant wavelet transform is proposed in this paper. The multi-thresholding function is a modified soft-thresholding to each node according to the discriminated threshold so as to reject かon external noise and white gaussian noise. It is verified by numerical simulation. And the experimental results are confirmed through sea-trial using multi-single sensors.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.2
• /
• pp.127-134
• /
• 2009

In this study, possibility of the laser eavesdropping is investigated on the window glasses with various thicknesses, Glass windows are excited by maximum length sequency (MLS) signal and the vibration sound is detected by a laser doppler vibrometer. From the detected sound, speech intelligibility is objectively estimated. Speech transmission index (STI), which is based on the modulation transfer function (MTF). is calculated for the estimation. Finally, disturbing wave effect on the speech intelligibility is analysed by using an outside speaker and a window shaker attached on the glass window. The purpose of the study is to estimate the possibility of remote eavesdropping by the laser sensor and to evaluate the performance of the homemade window shaker to protect from the remote eavesdropping.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.560-566
• /
• 2010

Port of Samcheonpo, designated as a Trading Port, is constructing New Port for the increase in trade and the requirement of maritime safety is growing. To meet these requirement for maritime safety, hydrographic surveying around south sea area of Samcheonpo using Multibeam Echo Sounder(MBES), DGPS etc was conducted. In this study, major item of hydrographic surveying such as sounding data was acquired and analyzed depth data comparing with vertical uncertainty in the special publication for hydrographic minimum specification published in Feb, 2008 by International Hydrographic Organization. By analyzing the depth data with 3 steps procedure, the port and starboard beam by removing the outskirts of the data processing could improve the efficiency and accuracy. The error of south sea were about 0.2m and the upper central part of the error were within 0.2m. Depth data of the study area are included in the 99% of 1st order and satisfied with a 100% tolerance of special order based on the international hydrograhic survey standard. This study will be a good case to support efficient decision-making for safe navigation, coastal management.