• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.197-209
• /
• 2002

If we reduce the number of vertexes to decrease bit rate in polygon-based shape coding, the distortion of approximated contour increases rapidly. On the other hand, if we reduce the distortion, the number of vertexes increases rapidly and many bits are required to encode the vertexes. To improve this problem, in this paper we propose the approximation vertex search method. The encoder in the proposed method searches the type of distortion patterns that is the most similar to the shape which polygon edge and contour segment form and then encodes it. And then, the decoder mathematically finds the approximated vertexes from decoded distortion pattern information. Therefore, the proposed algorithm results in encoding many vertexes at a low bit rate and having the smoother shape than conventional method. As shown in computer simulation, the proposed method has less distortion than conventional method. It costs less bit rate by $10{\sim}20%$ than conventional algorithm in same distortion.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.179-183
• /
• 1999

일반적인 통신 시스템에서 높은 전력을 가지는 출력 신호를 얻기 위하여 고전력증폭기(HPA)의 사용은 필수적이다. 그러나 HPA를 통과한 신호는 AM/AM 및 AM/PM의 비선형왜곡이 발생하는 단점을 가지고 있다. 그 결과 송신신호의 대역내 신호 스펙트럼이 왜곡되고 신호의 대역폭을 확장시켜 인접채널에 간섭을 유발한다. 본 논문에서는 HPA의 비선형 왜곡 특성을 보상하기 위하여 기저대역에서 룩업테이블(LUT)을 이용한 전치왜곡기의 동작 알고리듬을 제안한다. 먼저, LUT의 빠른 초기화를 위하여 송신신호로부터 HPA의 특성을 예측하여LUT를 초기화 시키는 알고리듬을 제안한다. 그리고 통신중에 HPA의 특성이 변화할 경우에 대비하여 평균자승오차를 최소화하는 적응알고리듬을 제안한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1102-1109
• /
• 2001

This paper presents the new architecture of an adaptive predistortion linearizer using the polynomial type predistorter. In the proposed linearizer, most of the processes, including the predistortion, are performed with a digital signal processor(DSP). The recursive least squares(RLS) algorithm is employed for the optimization process to minimize the errors between the predistorter and postdistorter output signals. Simulation results demonstrate that the adjacent channel power ratio(ACPR) is improved by greater than 40 dB at the band edge with linearization. The convergence and reconvergence performance of the linearizer is also satisfactory.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1428-1436
• /
• 2000

An adaptive predistorter linearizer suitable for the DSP implementation is proposed. Predistortion is performed by the DSP instead of the analog predistorter. RLS algorithm is employed for the optimization process to minimize the errors between the predistorter and postdistorter output signals. Computer simulation results for our linearizer show good performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1325-1331
• /
• 1996

In this paper, a new current-memory circuit is proposed that reduces the clock feedthrough(CFT) error voltage causing total harmonic distortion(THD) increment in switched-current(SI) systems. Using PMOS transistor in CMOS complementary, the proposed one reduces output distortion current due to the CFT errorvoltage. A proposed current-memory is designed using a 1.2.mu.m CMOS process anda 1MHz sinusoidal signal having a 68.mu.A amplitude current is applied as input (sampling frequency:20MHz). It hasbeen shown from the simulation that the output distortion current effected by the CFT error voltage is reduced by approximately 10 times the error voltage of conventional one, THD is -57dB in case ofappling 1kHz frequency input signalwith 0.5 peak signal-to-bias current ratio.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.519-525
• /
• 2018

This paper deals with noise suppression of multi-channel data captured by microphone array using multi-channel Wiener filter. Multi-channel Wiener filter does not rely on information about the direction of the target speech and can be partitioned into an MVDR (Minimum Variance Distortionless Response) spatial filter and a single channel spectral filter. The acoustic transfer function between the single speech source and microphones can be estimated by subspace decomposition of multi-channel Wiener filter. The errors are incurred in the estimation of the acoustic transfer function due to the errors in the estimation of correlation matrices, which in turn results in speech distortion in the MVDR filter. To alleviate the speech distortion in the MVDR filter, diagonal loading is applied. In the experiments, database with seven microphones was used and MFCC distance was measured to demonstrate the effectiveness of the diagonal loading.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.71-79
• /
• 1992

In general, the accelerogram of earthquake ground motion or the accelerogram obtained from dynamic tests contain various errors. In these errors of the accelerograms, there are instrumental errors(magnitude and phase distortion) due to the response characteristics of accelerometer and the digitizing error concentrated in low and high frequency components and random errors. Then, these errors may be detrimental to the results of data processing and dynamic analysis. An efficient method which can correct the errors of the accelerogram is proposed in this study. The correction of errors can be accomplished through four steps as followes ; 1) using an interpolation method a data form appropriate to the error correction is prepared, 2) low and high frequency errors of the accelerogram are removed by band-pass filter between prescribed frequency limits, 3) instrumental errors are corrected using dynamic equilibrium equation of the accelerometer, 4) velocity and displacement are obtained by integrating corrected accelerogram. Presently, infinite impulse response(IIR) filter and finite impulse response (FIR) filter are generally used as band-pass filter. In the proposed error correction procedure, the deficiencies of FIR filter and IIR filter are reduced and, using the properties of the differentiation and the integration of Fourier transform, the accuracy of instrument correction and integration is improved.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.3
• /
• pp.235-248
• /
• 2007

We developed a software for simulations and analyses of the Image Navigation and Registration (INR) system, and compares the characteristics of Image Motion Compensation (IMC) algorithms for the INR system. According to the orbit errors and attitude errors, the capabilities of the image distortions are analyzed. The distortions of images can be compensated by GOES IMC algorithm and Modified IMC (MIMC) algorithm. The capabilities of each IMC algorithm are confirmed based on compensated images. The MIMC yields better results than GOES IMC although both the algorithms well compensate distorted images. The results of this research can be used as valuable asset to design of INR system for the Communication, Ocean, Meteorological Satellite (COMS).

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.343-348
• /
• 2010

Gravity anomalies observed in shipborne survey are usually distorted by bad weather conditions and unexpected vessel movement. These distorted data should be removed because they may mislead the data interpretation. However, it is not possible to perfectly remove all erroneous data. Cross-over point correction, which is generally used, only reduces the errors at cross-over points, and thus the data still contain error values. To resolve this drawback, Rauch-Tung-Striebel(RTS) filter was adopted to minimize all errors in the data and at cross-over points. After applying this method, the range of anomaly variation is reduced from 15 mGal to less than 2 mGal, and errors at the cross-over points are minimized from 4.21 mGal to 2.95 mGal. The results imply that RTS filter is very useful to reduce errors in the data and corss-over points.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.1-8
• /
• 2011

The accuracy of MR sensor-based electronic compass is influenced by the temperature drift and DC offset of the MR sensor and the OP-amp, the magnetic distortion of nearby magnetic materials, and the compass tilt We design the 3-axis MR sensor and accelerometers-based electronic compass which is compensated by the set/reset pulse switching method on the temperature drift and DC offset, by the execution of hard-iron calibration routine on the magnetic distortion, and by the execution of the Euler rotational equation on the compass tilt. We qualitatively analyze the measured azimuth error on the execution of sensitivity calibration routine which is the normalization process on the different sensitivity of each MR sensor and the different gain of each op-amps. This compensation and analytic result make us design the one degree accuracy electronic compass.