• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.148-154
• /
• 2014

This paper suggests a new system based on image-processed information which is designed to control traffic light by measuring two-way traffic at the same time with a surveillance camera. With this system, the existing way of using one camera for one lane or loop coil will be improved to the more effective way of using only one camera to monitor a two-way, 8 lane roads statistically. Car images can be detected clearly even in irregular condition because of the background updating in real time. In addition, more accurate measurement is possible to users by selecting extra attention-needed regions. The automatic traffic light controlling algorithm, suggested in this paper, will prevent users and drivers from wasting their time and energy by controlling the number of traffic in advance.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.174-180
• /
• 2015

The flow pattern and the solid-liquid mass transfer coefficient in figure-eight shaking vessels were observed by experimental method. The flow patterns, mixing time, power consumption and mass transfer coefficient in the figureeight shaking vessels changed irregularly with increase in the shaking frequency. Any frequency, even in the Fr = 0.095 or more became clear experimentally. The region of the optimum operating condition of the figure-eight shaking was larger than that of the reciprocal shaking. The solid-liquid mass transfer coefficient was correlated with the same correlation as that of the rotary shaking vessel of existing. The gas-liquid mass transfer coefficient of the figure-eight shaking vessel was also correlated with the same type of correlation as that of the rotary shaking vessel of existing.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.454-459
• /
• 2013

Pressure waves are generated and propagate in a tunnel when train enters tunnel high speed. A compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as an expansion wave. An expansion wave due to the entry of the train tail propagates along the tunnel and is reflected at tunnel exit as a compression wave. These pressure waves are repeatedly propagated and reflected at the tunnel entrance and exit. Severe pressure changes causes ear-discomfort for passengers in the cabin and micro pressure waves around the tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnels qualitatively and quantitatively, because pressure change rate is considered as one of the major design parameters for optimal tunnel cross sectional area and repeated fatigue force on car body. In this study, we developed a characteristics method based on a fixed mesh system and boundary conditions for crossing trains and analyzed this system using an X-t diagram. The results of the simulation show that offsetting of pressure waves occurs for special entry conditions of a crossing train.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.47-63
• /
• 1994

An important parameter in characterizing mobile communication channel is delay spread. This paper presents the results of measured delay profiles and calculated distribution funcations of delay spread for typical cellular service environments at Taejon and vicinities. The measurement system uses 1023 chip length, 5 Mbps PN code and sliding correlation method. It has been evaluated by using commercial hardware channel simulator for reliability of out data. As results the value of mean delay spread is 2.08 $\mu\textrm{s}$for suburban area. 2.12 $\mu\textrm{s}$ for urban area and 1.3 $\mu\textrm{s}$ for national/local road. Delay spread is less then 3.4$\mu\textrm{s}$, 2.8$\mu\textrm{s}$ and 1.5 $\mu\textrm{s}$ for probability of 50% and 4.5$\mu\textrm{s}$, 4.2$\mu\textrm{s}$ and 2.9$\mu\textrm{s}$ for probability of 90% at each tested site. The difference of delay spread is within 7% between going and returning status along same street. In this experiment, we found delay spread for suburban area is larger than reported foreign test results.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.353-358
• /
• 2006

Unlike TCP Reno, TCP Vegas recognizes network congestion through the measuring of RTT (Round Trip Time) and decides the main congestion control parameters, such as Windows size. But, congestion avoidance scheme of Vegas poorly reflects asymmetric characteristics of packet path because TCP Vegas uses the measuring of RTT that reflects forward/backward packet transmission delay as a forward delay. The RTT can't infer the forward/backward transmission delay variation because it only measures the packet's turn around time. In this paper, We have designed and implemented a new Vegas congestion control algorithm that can distinguish forward/backward network congestion. We have modified the source codes of TCP Vegas in Linux 2.6 kernel and verified their performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.152-159
• /
• 1999

This paper describes the rmtion characteristics of a particle in GIS under AC voltage. To measure the motion characteristics of the particle, a model gas chamber and parallel plain electrodes were designed and manufactured lift-off voltages of wire and spherical particles on the electrode were calculated and rreasured, and electric charge was calculated. By using a high speed carrera, the rmtion characteristics of various particles with aw}ied voltages, such as motion pattern, lift-off time, lift-off height, were analyzed 1be lift-off voltages were greatly affected by diarreters of wire and spherical particles. At voltage around lift-off voltage, the stand-up particle in vertical state rmved up and down between electrodes and the height of the lift-off particle was low. At voltage around breakdown voltage, the particle repeated vertical rotation a few times while they were being lifted off, and then, they were floating between the electrodes.trodes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.9
• /
• pp.197-206
• /
• 2020

Collaborative research in science applications based on HPC service needs rapid transfers of massive data between research colleagues over wide area network. With regard to this requirement, researches on enhancing data transfer performance between major superfacilities in the U.S. have been conducted recently. In this paper, we deploy multiple data transfer nodes(DTNs) over high-speed science networks in order to move rapidly large amounts of data in the parallel filesystem of KISTI's Nurion supercomputer, and perform transfer experiments between endpoints with approximately 130ms round trip time. We have shown the results of transfer throughput in different size file sets and compared them. In addition, it has been confirmed that the DTN cluster with three nodes can provide about 1.8 and 2.7 times higher transfer throughput than a single node in two types of concurrency and parallelism settings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.44-52
• /
• 2005

This paper proposes a neural network prediction model to improve the valid packet transmission rate for the QoS(Quality of Service) of multimedia transmission. The Round Trip Time(RTT) and Packet Loss Rate(PLR) are predicted using a neural network and then the transmission rate is decided based on the predicted RTT and the PLR. The suggested method will improve the transmission rate since it uses the rate control factors corresponding to time of data is being transmitted, while the conventional one uses the transmission rate determined based on the past informations. An experimental set-up has been established using a Linux PC system, and the multimedia data are transmitted using UDP protocol in real time. The valid transmitted packets are about 5% higher than the one in the conventional TCP-Friendly congestion control method when the suggested algorithm was applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.771-780
• /
• 2021

The space Debris laser ranging system is called to be a definite type of satellite laser ranging system that measures the distance to satellites. It is a system that performs POD (Precise Orbit Determination) by measuring time of flight by firing a laser. Distance precision can be measured in mm-level units, and it is the most precise system among existing systems. Currently, KASI has built SLR in Sejong and Geochang, and utilized SLR data to verify the precise orbits of the STSAT-2C and KOMASAT-5. In recent years, due to the fall or collision of space debris, its satellites have been threatened, and in terms of security, laser tracking of space objects is receiving great interest in order to protect their own space assets and protect the safety of the people. In this paper, a 1.5m-class main mirror was applied for the system design of a multipurpose laser tracking system that considers satellite laser ranging and space object laser tracking. System preliminary performance analysis was performed based on Link Budget analysis considering specifications of major components.