• Korean Journal of Poultry Science
• /
• v.37 no.1
• /
• pp.1-8
• /
• 2010

An experiment was conducted to investigate the effect of dietary supplementation of rare earth, individually and in combination with colloidal silver on growth performance, nutrient digestibility, carcass characteristics and immune response in broiler chicks. A total of 3,872 day-old chicks were randomly allotted to four dietary treatments in a randomized complete block design. There were four pens per treatment and 242 chicks per pen. The dietary treatments were T1) CON (control diet), T2) colloidal silver (control diet+20 ppb colloidal silver), T3) rare earth elements (control diet+500 ppm rare earth), T4) colloidal silver +rare earth elements (control diet+20 ppb colloidal silver+500 ppm rare earth). There were no significant differences in feed intake and feed conversion ratio (FCR) among dietary treatments during the whole experimental period (0 to 5 weeks). Body weight gain was greatest in birds fed T3 and T4 diets (p<0.01). Apparent digestibility of dry matter, crude protein, ether extract and calcium were greatest in birds fed T4 diet (p<0.05), while apparent digestibility of phosphorus was lowest in birds fed T3 diet (p<0.05). There was no significant difference in bone strength, carcass characteristics and immune response among dietary treatments. Dry matter content of bone was greatest in birds fed T4 diet (p<0.05), and phosphorus content of bone was greater in birds fed T3 diet than in birds fed T2 and T4 diets (p<0.05). Thus, the results of this study suggest that rare earth elements supplementation, individually and in combination with colloidal silver could improve performance of broilers.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.27-39
• /
• 2009

The main objective of this study is to investigate the characteristics of combustion by analyzing fuel gases from a combustion equipment with various combustion conditions for refuse-derived fuels (RDFs). CO gas is a parameter for indicating of incomplete combustion during a combustion process. The lowest CO gas was produced when the experiment conditions were m=2 under air-fuel condition and $800^{\circ}C$. $CO_2$ gas is a final product after complete combustions. The highest amount of $CO_2$ gas was produced when the experiment conditions were m=2 under air-fuel condition and $800^{\circ}C$. The highest level of $SO_2$ gas was produced in S.1 sample containing the highest sulfur. The highest level of NOx gas was produced in S.1 sample with the highest nitrogen content and air-fuel condition of m=2 under temperature of $800^{\circ}C$. HCl gas that is generated by reacting with metals catalyst through oxygen catalyst reaction during combustion process is a precursor of dioxin formation. The higher level of HCl gas was produced in the sample with higher chlorine content. The lowest level of HCl gas was produced when the experiment conditions were air-fuel condition of m=2 and $800^{\circ}C$. The lowest level of $NH_3$ gas was generated when the experiment condition was m=2 under air-fuel condition and after 3 minutes. Air-fuel condition is more important to create $NH_3$ gas than operating temperatures. Higher level of $H_2S$ gas was generated in S.1 sample with the higher sulfur content and was created in RDFs that contain higher mixture ratios of sewage sludge and food wastes. A result of combustion, gases and gases levels from the combustion of S.1 and S.2 were very similar to the combustion of a stone coal. As results of this research, when evaluating the feasibility of the RDFs, the RDFs could be used as auxiliary and main fuels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.4
• /
• pp.45-56
• /
• 1985

This study was made to evaluate temperature effects on biological wastewater treatment particularly at the lower temperatures. Cell yield coefficients and other kinetic factors were compared by varying temperature for industrial wastes. Bench scale aeration-only complete mixing activated sludge(CMAS) units were operated at temperatures of $1^{\circ}$, $4^{\circ}$, $7^{\circ}$ and $10^{\circ}C$ with substrate concentrations of 5,000 and 200 mg/l COD. The study results indicate that the cell yields were computed to be 0.5 to 0.6 grams VSS per grams BOD removed, and were not influenced by temperature variations. The synthesis/total energy ratios were computed to be 0.45 to 0.58 and had a tendency to become larger at lower temperatures. The endogenous respiration rates were computed to be 0.07 to 0.08/day, and seemed to be independent of temperature. In addition, very little temperature effects were observed when F/M ratio and substrate concentrations were reduced.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.62-67
• /
• 2015

The carbon microspheres of a core-shell type were grown by the method of mixed-source hydride vapor phase epitaxy (HVPE). The surface and the cross section of the carbon microsphere grown by a new method were observed by scanning electron microscope (SEM). The characteristics of the carbon microsphere were investigated by X-ray photoelectron spectroscopy (XPS) and a high resolution-transmission electron microscope (HR-TEM). From these measurements, the diameters of carbon sphere were about few hundred micrometers. Furthermore, we show that the carbon microsphere of the core-shell type by mixed-source HVPE method can be grown successfully with the larger size than those of the existing one. This mixed-source HVPE method is proposed a new method for making of carbon microsphere.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1775-1781
• /
• 2008

The effects of the type of curing agent on the swelling of the natural rubber(NR) sponge applicable to the self-sealing layer of a helicopter fuel tank were investigated. The curing systems employed were peroxide and mixed ones of sulfur and peroxide. The NR compounds were prepared in a kneader and a roll-mill. The compounds were partially cured in a press at high pressure and subsequently cured fully with expansion in another press at atmospheric pressure. The apparent density of the NR sponge was measured and the cell structure was observed with scanning electron microscopy. The swelling experiments were performed at room temperature using toluene, iso-octane, and an aircraft fuel as a solvent. More rapid volume swelling of the NR sponge cured by peroxide was achieved than cured by sulfur and peroxide with similar amount of curing agent added in rubber compounds. The apparent density and cell structure of the sponge were extremely sensitive to the amount of peroxide, which influences again the swelling behavior of the NR sponge. It is important to control properly two reactions of decomposition of foaming agent and crosslinking of NR in the mold to obtain rapid swelling of the NR sponge on contact of the fuel.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.16-27
• /
• 2000

In order to produce raw material powder of advanced magnetic material by spray roasting process, newly modified spray roasting system was developed in this work. In this spray roasting system, raw material solution was effectively atomized and sprayed into the reaction furnace. Also, uniform temperature distribution inside reaction furnace made thermal decomposition process fully completed, and produced powder was effectively collected in cyclone and bag filter. This system equipped with apparatus which can purify hazard produced gas. In this study complex acid solution was prepared by dissolution of mill scale and ferro-Mn into the acid solution, and the pH of this complex acid solution was controlled about to 4. It was conformed that mill scale and ferro-Mn containing a lot of impurities such as $SiO_2$, P and Al could be used as raw material by reducing the impurities content of complex acid solution below 20 ppm. Complex oxide powder of Fe-Mn system was produced by spraying purified complex acid solution into the spray roaster through nozzle, and the variations of produced powder characters were studied by changing he reaction conditions such as reaction temperature, the injection velocity of solution and air, nozzle tip size and concentration of solution. The morphology of produced powder had spherical shape under the most experimental conditions, and concentration of solution. The morphology of produced powder has spherical shape under the most experimental conditions, and the composition and the particle size distribution were almost uniform, which tells the excellence of this spray roasting system. The grain size of most produced powder was below 100 nm. From the above results, it will be possible to produce ultra fine oxide powder from the chloride of Fe, Mn, Ni, Cu and rare earth by using this spray roasting system, and also to produce ultra fine pure metal powder by changing reaction atmosphere.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.76-85
• /
• 2016

This study introduces the system layout and control strategy necessary to start and operate a fuel processor in a wide range of temperatures where a gasoline was selected as the fuel of fuel processor considering logistic support of Korea Army. The autothermal reformig(ATR) catalyst is heated to light-off temperature by combustion method in the initial stage. In order to ignite the gasoline and air mixture stably, the glow plug is installed after ATR catalyst. When the catalyst is increased to light-off temperature, the reformer is operated from initiation to steady state conditions as follows: Partial oxidation(POX) mode, partial ATR mode, full ATR mode. Finally the start-up and control strategy is validated by the operational test of gasoline fuel processor at low and room temperature. As a result the gasoline fuel processor is able to start-up within 40 min and to produce the reformate gas which has 37 ~ 42 vol.%(dry basis) of $H_2$ and 0.3 vol.% of CO.

• The Korean Journal of Mycology
• /
• v.16 no.4
• /
• pp.214-219
• /
• 1988

Factors affecting protoplast formation and reversion were investigated in Pleurotus sapidus kalchbr. For release of protoplast, enzyme mixture of Novozyme 234, ${\beta}-D-glucanase$ and ${\beta}-glucuronidase$ was most effective, when mycelium of 0.6 M sucrose solution as osmotic stabilizer without addition of buffer solution. The yield of protoplast was highest with mycelium cultured for 4 days on mushroom complete agar medium at ${30}^{\circ}C$. Protoplasts of Pleurotus sapidus were reverted to normal hyphal growth with maximum reversion frequency of 2% on Mushroom complete agar medium stabilized with 0.6 M sucrose solution and covered by 0.75% agar layer.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.59-65
• /
• 2005

A phosphate recovery system from artificial wastewater was developed using a completely mixed phosphorus crystallization reactor, in which powdered converter slag was used as a seeding crystal. In preliminary test, the optimal pH range for meta-stable hydroxyapatite crystallization for high phosphorus concentration was observed to be 6.0 to 7.0, which was different from the conventionally known pH range (8.0~9.5) for effective crystallization in relatively low phosphorus concentration less than 5 mg/L. The average phosphorus removal efficiency in a lab-scaled completely mixed crystallization system for artificial wastewater with about 100 mg/L of average $PO_4-P$ concentration was shown to be 60.9% for 40 days of lapsed time. XRD analysis exhibited that crystalline of hydroxyapatite formed on the surface of seed crystal, which was also observed in SEM analysis. In EDS mapping analysis, composition mole ratio (=Ca/P) of the crystalline was found to be 1.78, indicating the crystalline on the surface of seed crystal is likely to be hydroxyapatite. Particle size distribution analysis showed that average size of seed crystal increased from $28{\mu}m$ up to $50{\mu}m$, suggesting that phosphorus recycling from wastewater with high phosphorus concentration can be successfully obtained by using the phosphorus crystallization recovery system.

• Korean Journal of Microbiology
• /
• v.22 no.4
• /
• pp.207-214
• /
• 1984

Improved methods for the isolation and purification of conidial protoplast were investigated and conidial proplast from auxotrophic mutants were fused. The reaction time for isolation of protoplasts from the swollen condiospores preincubated in liquid minimal medium supplimented with 2-deoxy-D-glucose was shorten by reaction with mixture of 2% driselase and 2% ${\beta}-glucuronidase$ (1:1). The conidial protoplast could be highly purified by using 5% Ficoll 400 as a centrifugation medium. Nucleus of the conidial protoplast was stained with Giemsa stain and the conidial protoplast had one nucleus. It was also confirmed that the conidial protoplast was true protoplast with no cell wall remnant at the outside of plasma menbrane. Fusion frequencies of the conidial protoplast from auxotrophic mutants ranged from $3.4{\times}10^{-1}\;to\;4.9{\times}10^{-1}$. These values were higher than those of mycelial protoplast by a factor of 5 to 28.