• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.54-62
• /
• 2012

본 실험에서는 투명비누를 만드는데 사용되는 폴리올의 최적 농도를 실험계획법을 이용하여 결정하였다. 짧은 사슬을 보유한 디프로필렌글리콜과 1,3 부틸렌글리콜은 비누의 투명도를 증가시켰으나 폴리에틸렌글리콜 400, 글리세린과 디글리세린은 비누를 불투명하게 하였다. 프로필렌글리콜, 디글리세린, 디프로필렌글리콜 및 폴리에틸렌글리콜의 농도를 증가시키면 비누의 경도는 증가하였다. 경도, 투명도, 물의 흡수성 및 마찰 용해도는 디프로필렌글리콜, 폴리에틸렌글리콜, 설탕과 트리에탄올아민의 농도를 조절하여 최적화할 수 있었다.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.477-484
• /
• 2008

It is inevitable to use chemical germicidal agents like paraben, imidazolidinyl urea and phenoxyethanol to preserve the emulsions which is usually used in cosmetics. Although these chemical preservatives are good enough to reduce the microbiological contamination, they are irritative, allergenic to the skin. Several kinds of polyols are used in cosmetics as moisturizer and solvent. In this study, we evaluate the effects of polyols on anti-microbial activities, safety and resistant index. MIC(minimal inhibitory concentration) of polyols determined against 6 germs including Staphylococcus aureus. The order of MIC was PG $\cong$ DPG $\cong$ 1,3BG > HG > 1,2-PD > 1,2-HD $\cong$ 1,2-OD. The $2{\sim}3\;wt%$ of 1,2-HD(hexanediol) shows good anti-microbial effects in emulsions without allergenic response. Resistant index of 1,2-HD was less than 2 and this value was smaller than that of chemical preservatives. The mechanism of antimicrobilogical effect might be disturb the membrane of germs by investigating using electron microscope. Added to that, using this paradigm, low preservative contents, paraben-free system, and even preservative-free systems can be expected from these results.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.410-415
• /
• 2007

Functional cosmetics are intensively investigated for the effectiveness of skin whitening, anti-aging and slimming. For enhancing the effectiveness, active ingredients should be delivered into the cell in the dermis. The amounts of penetration of caffeine and $Arbutin^{(R)}$ were tested, in vitro, using Franz diffusion cell. Oil-in-water emulsions were used for the vehicles of the transport. For the measuring the amounts of active ingredients delivered into the dermal skin, tape stripping was done after finishing the penetration experiments. The amounts of delivered caffeine were $8.45{\pm}$ 1.26ug/ml before tape stripping and $3.45{\pm}$ 1.80ug/ml after tape stripping, however, the amounts of delivered $Arbutin^{(R)}$ was quite small to detect. From now on, proper vehicles are considered for enhancing the delivery of $Arbutin^{(R)}$ Hairless mouse skin was compared with pig skin as a transdermal delivery membrane. The aspects of delivery were similar, but the amount of delivered ingredients using pig skin was larger than that of using hairless mouse skin. Therefore, the pig skin would be considered as a membrane for drug delivery experiments.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.16-34
• /
• 2013

올레오겔은 친유성의 액체와 고체의 혼합물로 정의할 수 있다. 고상의 지질 물질(올레오겔 형성제)은 10 wt.% 미만의 농도로 네크워크 형성에 의해 오일을 함유할 수 있다. 올레오겔 형성제는 자발적 회합계와 결정화 입자계의 두 가지 그룹으로 나눌 수 있다. 본 연구에서는 다양한 올레오겔 형성제를 이용한 올레오겔 형성에 관한 최근 연구 결과를 살펴보고자 한다. 지질 네트워크 형성의 기본적인 양상을 올레오겔을 기본으로 한 결정화 입자와 관련하여 논의하고자 한다. 또한 올레오겔의 화장품에의 응용 사례에 대해 기술하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2017

Despite its excellent properties, polyurea coating waterproofing material is exposed to sunlight when it is applied to the exterior wall of concrete by exposed waterproofing method such as a roof of a building, resulting in a problem of causing a large deterioration in performance compared to initial properties. The purpose of this study is to investigate the effect of carbon fiber incorporation on the performance of carbon fiber - reinforced polyureas and to study the optimum carbon fiber length and content respectively. Result of the study confirmed that the performance of the carbon fiber was improved by 2% or more, and the carbon fiber length was 30 ㎛ and the mixing ratio was 3%. It is expected that stable durability can be secured when manufacturing fiber-incorporated polyureas.

• 한국식생활문화학회지
• /
• 제29권6호
• /
• pp.519-527
• /
• 2014

This study was conducted to analyze the differences in consumer behavior of coffee product according to monthly income in franchised coffee shop's consumer in Korea. A total of 293 questionnaires were used out of the 330 that had been distributed for analysis; those that lacked reliability were excluded. Frequency, ANOVA, and Duncan's multiple range test was conducted to analyze the hypotheses of the study. The findings are summarized as follows. There were significant differences in consumer behavior with regard to seeking health, eco-friendly products, product brand, and product taste as well as preferred coffee menu and coffee consumption expenditures. High income consumers rather than low income groups showed much higher score for concerning health, concerning diet, concerning calorie, concerning instant, concerning caffeine and concerning nature, organic in coffee consumer behavior. In amount spent on purchasing coffee products according to income, low income consumers rather than high income groups had much higher financial expense burden.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.215-216
• /
• 2016

Urethane waterproofing materials which currently being used most commonly in the Korean domestic market have high applicability and construct layers without forming any joints, but under the influence of low temperature and low humidity, as well as the thickness of the applied layer, the curing time of this material may become extended in construction sites. To resolve these issues, a proposed method of using water-hardening type of polyurethane waterproofing materials are being developed. However, there currently lacks any standards or evaluation methods on determining an optimal mixture ratio of water for the water-hardening polyurethane waterproofing materials. Therefore, for the establishment of a board applicability of the water-hardening polyurethane waterproofing methods in construction sites, this study objectively analyzes the changes in the performance of these materials depending on the changes of the water mixture ratio and attempts to procure the optimal ratio on the basis of forming a provisionary standard.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.211-212
• /
• 2016

Due to a lack of objective and adequate study on the physical effects on hydroponic polyurethane waterproofing material water mixture ratio, construction site workers are having to rely on their hands-on experience to determine a mixture ratio, resulting in difficulty of maintaining quality management. Particularly in cases of rooftop exposed type hydroponic polyurethane materials, the varying temperature conditions make it further difficult for quality management control. in this regard, this study conducts tensile strength testing and compares the tensility change rates hydroponic polyurethane waterproofing materials with various water mixture ratios ranging from 0%~50% and exposed to alternating temperature change between -20℃ to 60℃ in the span of 1 hour after curing for 14 days.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.217-218
• /
• 2016

Sheet based waterproofing methods are factory produced and have a advantage or forming uniform waterproofing layer in construction sites, allowing them to become a commonly used material domestically. Particularly in the case of EVA waterproofing sheets, they can be manufacturing using recycled materials and are thus increasing in application due to their eco-friendly factors. However, heating adhesion method has to be used in case of overlapping areas of waterproofing sheets, but not enough studies have been made on the adhesion stability based on different heat adhesion speed. In this paper, EVA sheets have been studied with their overlap area properties following a heat adhesion method in wintertime ambient conditions and have been observed for the changes in the tensile strength based on different head adhesion speed and rates. According to the results, 6~7m/min adhesion speed was shown to have produce the best tensile strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.251-252
• /
• 2018

Cool roof coating materials generally use white color which has the highest reflectance, but it is a tendency to apply various colors because it can cause glare and fatigue of a nearby building user due to the urban beauty and high reflection. This study when applying color diversity material cool roof coating was carried out as a basic research for the degree of solar radiation reflectance change. Experiment result. As a result of the measurement of the reflectance of each specimen, white showed the best reflectance in the near infrared region, and black had the lowest reflectance. Also, in case of brown, it was confirmed that the reflectance of solar radiation in the near extrinsic region is lower than that of gray.