• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.170-187
• /
• 2020

Dolmens bearing the burial layout and stone coffin tombs of the late Bronze Age were excavated from Samdeok-ri, Goseong, Gyeonsangnsamdo, and grave items such as red-burnished pottery, arrowheads, and stone swords were also discovered. In the case of the red-burnished pottery that was found, it retains a pigment layer with a thickness of about 50 to 160㎛, but with most of the other items, exfoliation and peeling-off of pigment layers can be observed on the surface. The raw materials of the red-burnished pottery contained moderately sorted minerals such as quartz, feldspar, and hornblende, and partly opaque iron oxide minerals were also identified. In particular, the raw materials of the red-burnished pottery from stone coffin tomb #6 were different from those of the other pottery, containing large amounts of hornblende and feldspar. The pottery's red pigment was identified as hematite and showed similar mineral content of raw materials such as fine grained quartz, feldspar, and hornblende. The firing temperature is estimated to have been approximately 900℃, based on their mineral phase. The possibility exists that the raw materials had been collected from the Samdeok-ri area, because diorite and granite diorite with dominant feldspar and hornblende have been identified within 3km of that area. During the pottery manufacturing process, it is estimated that the pigment was painted on the entire surface of the red-burnished pottery after it had been molded and then finished using the abrasion technique. In other words, the red-burnished pottery was made by the process of vessel forming - semi drying - coloring - polishing. The surface and cross-section of the pottery appears differently depending on the concentration of the pigment and the coloring method used after vessels were formed. Most of the excavated pottery features a distinct boundary between pigment and body fabric. However, in the case of pottery in which fine-grained pigments penetrate the body fabric so that layers cannot be distinguished, there is the possibility that the fine-grained pigment layer was applied at a low concentration or immediately after vessel forming. Many cracks can be seen on the surface pigments in thickly painted pottery items, and in many cases, only a small portion of the pigment layers remain due to surface exfoliation and abrasion in the burial environment. It is reported that pottery items may be more easily damaged by abrasion if coated with pigment and polished, so it is believed that the red-burnished pottery of the Samdeok-ri site suffered from weathering in the burial environment. This damage was more extensive in the potsherds that were scattered outside the tomb.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.339-349
• /
• 2021

In recent years, the occurrence of bacterial diseases of soybean has been increasing due to the continuous rise in spring temperature and the humid weather as a result of rain concentrated at the middle and late stages of crop growth. The resulting severe economic damage is also a concern. Unfortunately, there are no precise data on the occurrence and damage to lay the foundation for bacterial disease control in soybean in the Chungbuk Province. Therefore, the present study investigated the occurrence of major bacterial diseases, namely bacterial pustules, bacterial blight, and wildfire, in different soybean varieties in 410 fields in the Chungbuk Province in 2017. The incidence rate of bacterial pustules in the affected fields was 76.6%, and the incidence rate of infected plants was 29.3%. The incidence rate of bacterial blight in the affected fields was 13.9%, and the incidence rate of infected plants was 4.6%. The incidence rate of wildfire in the affected fields was 23.2%, and the incidence rate of infected plants was 10.1%. The overall incidence rate of bacterial diseases in the soybean fields where the diseases originated was 37.9% for bacterial pustules, 21.0% for bacterial blight, and 25.0% for wildfire, indicating that the disease incidence rate in fields where the disease originated was generally high. Among different varieties, the incidence rate of bacterial pustules was the highest in sprout soybean (88.9%), followed by Seoritae (84.0%) and Daewon (81.2%). The incidence rate of bacterial blight was the highest in the Daewon (19.6%), followed by Seoritae (15.2%) and sprout soybean (12.5%). The incidence rate of wildfire was the highest in sprout soybean (25.0%), followed by Daewon (24.7%) and Seoritae (5.4%). Meanwhile, in Uram, the incidence rate of bacterial pustules (7.1%) was the lowest, and this variety was not affected by bacterial blight or wildfire.

• Journal of Life Science
• /
• v.32 no.8
• /
• pp.633-640
• /
• 2022

Recently, kenaf (Hibiscus cannabinus L.) has been highlighted due to its rapid growth in dry, infertile land and its versatile applications in textiles, paper, feed, food, medicine, and phyto-remediation. In Korea, a new cultivar, 'Jangdae', which has the merit of feasible seed-gathering, was established in 2013. However, most of the kenaf seeds used are still imported, and a comparison study of useful bio-activities between Jangdae and imported seeds has not been conducted. In this study, anti-thrombosis, antioxidant and anti-diabetic activities of the ethanol extracts of the Jangdae seed (E-JS) and 8 imported cultivar seeds (E-ICS) were investigated. The E-JS has 14.4 mg/g of total polyphenol and 5.3 mg/g of total flavonoids, whereas the E-ICS has 5.9~8.7 mg/g and 0.7~1.5 mg/g, respectively. Among the 9 kenaf seed extracts, IT 181215 and IT 207877 seed extracts showed 1.92 and 1.88-folds extended thrombin time (TT), and IT 207886 seed extracts showed 3.04-folds extended activated partial thromboplastin time (aPTT). All extracts, except Hong-ma seed, showed 1.36~1.56-folds extended prothrombin time (PT). The E-JS showed strong anti-thrombosis activities with 1.46-folds (TT), 1.38-folds (PT) and 2.37-folds (aPTT) compared to those of solvent controls. The E-JS has the strongest antioxidant activities among the seed extracts, with 0.48 mg/ml of RC₅₀ for ABTS cation and 0.27 mg/ml of RC₅₀ for nitrite scavenging. Meanwhile, the E-JS and IT 181215 extracts showed strong inhibition against α-glucosidase with 10.3~10.6% inhibition at 0.5 mg/ml. Our results suggest the E-JS has potential as an anti-thrombosis, antioxidant and anti-diabetic agent.

• Journal of the Korean earth science society
• /
• v.43 no.2
• /
• pp.239-252
• /
• 2022

Quality control methods for the first G-band vapor radiometer (GVR) mounted on a weather aircraft in Korea were developed using the GVR Precipitable Water Vapor (PWV). The aircraft attitude information (degree of pitch and roll) was applied to quality control to select the shortest vertical path of the GVR beam. In addition, quality control was applied to remove a GVR PWV ≥20 mm. It was found that the difference between the warm load average power and sky load average power converged to near 0 when the GVR PWV increased to 20 mm or higher. This could be due to the high brightness temperature of the substratus and mesoclouds, which was confirmed by the Communication, Ocean and Meteorological Satellite (COMS) data (cloud type, cloud top height, and cloud amount), cloud combination probe (CCP), and precipitation imaging probe (PIP). The GVR PWV before and after the application of quality control on a cloudy day was quantitatively compared with that of a local data assimilation and prediction system (LDAPS). The Root Mean Square Difference (RMSD) decreased from 2.9 to 1.8 mm and the RMSD with Korea Local Analysis and Precipitation System (KLAPS) decreased from 5.4 to 4.3 mm, showing improved accuracy. In addition, the quality control effectiveness of GVR PWV suggested in this study was verified through comparison with the COMS PWV by using the GVR PWV applied with quality control and the dropsonde PWV.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.255-264
• /
• 2022

This study was performed to investigate the effects of dietary supplementation with ginseng by-products on growth, organ development, blood biochemical profiles, immune response, and stress parameter of broilers reared in high ambient temperatures. One hundred one-day-old male chicks (Ross 308) were used. At week two, the birds were randomly allocated into five dietary groups; control (CON), 0.5% ginseng berry (GB1), 1.0% ginseng berry (GB2), 0.5% ginseng leaves and stems (GLS1), and 1.0% ginseng leaves and stems (GLS2). The temperature was maintained at 32±1℃from 9 AM to 5 PM. Growth, serum immunoglobulins and corticosterone levels were monitored and analyzed. No significant differences among groups were observed in growth. However, during the finisher period (21~35d) and overall period (7~35 d), body weight gain in all supplemented groups tended higher than CON group. Blood biochemical profiles did not significantly differ among treatment groups except in bilirubin level. Serum immunoglobulins and corticosterone level showed no significant differences among groups. IgM and IgG levels were numerically higher in GLS1 than in other groups, but the difference was not significant. Corticosterone level also tended lower in all supplemented groups than in CON group, and larger decreases were observed in groups with higher ginseng by-product concentration. In conclusion, dietary supplementation of ginseng by-products shows potential to reduce heat stress in growing broilers with no negative effect on productivity.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.3-20
• /
• 2022

Recently, prior to the commercialization of urban air mobility (UAM), the importance of R&D for air transportation-related industries in urban areas has significantly increased. To create a UAM environment, research is being conducted on personal air vehicles (PAVs). They are key means of air transportation, but research on the physical factors influencing their passengers is relatively insufficient. In particular, because the PAV is expected to be used as a living space for the passengers, research on the effects of the physical elements generated in the PAV on the human body is essential to design an interior space that supports the in-vehicle activities of the passengers. Therefore, the purpose of this study is to derive the constraint factors that affect the human body due to the air navigation characteristics of the PAV and to understand the impact of these constraint factors on the bodies of the passengers performing in-vehicle activities. The results of this study indicate that when the PAV was operated at less than 4,000 ft, which is the operating standard, the constraint factors were noise, vibration, and motion sickness caused by low-frequency motion. These constraint factors affect in-vehicle activity; thus, the in-vehicle activities that can be performed in a PAV were derived using autonomous cars, airplanes, and PAV concept cases. Furthermore, considering the impact of the constraint factors and their levels on the human body, recommended constraint factor criteria to support in-vehicle activities were established. To reduce the level of impact of the constraint factors on the human body and to support in-vehicle activity, the seat's shape and built-in functions of the seat (vibration reduction function, temperature control, LED lighting, etc.) and external noise reduction using a directional speaker for each individual seat were recommended. Moreover, it was suggested that interior materials for noise and vibration reduction should be used in the design of the interior space. The contributions of this study are the determination of the constraint factors affecting the in-vehicle PAV activity and the confirmation of the level of impact of the factors on the human body; in the future, these findings can be used as basic data for suitable PAV interior design.

• Journal of Korean Elementary Science Education
• /
• v.41 no.2
• /
• pp.295-306
• /
• 2022

This study aims to analyze the aspect of inquiry activity for seven national science textbooks, which were recently authorized and developed for elementary schools. The study reviewed seven of the abovementioned textbooks, which were introduced to the authorized textbook system for 2022 in elementary schools. In-depth analysis was conducted on inquiry activities, which were frequently emphasized since the third curriculum. A chapter entitled "Stratum and Fossils" was selected to analyze the detailed types of inquiry activity using the framework. First, analysis was conducted on six types of inquiry activity. The result indicated that two out of seven inquiry activities different among the national and authorized textbooks. In other words, the two slightly differed from the inquiry activities presented in national textbooks. It was not reasonable that the introduction of the authorized textbook exerted an effect on the increase of autonomy and variety of teaching and learning activities compared with those of national textbooks. Second, science process skills, material, and inquiry process were established as standards for the detailed types of inquiry activity. The study demonstrated a slight difference among textbooks in terms of material and inquiry process, whereas the inquiry activities of the seven authorized textbooks were the same or similar. This finding indicated that students could experience seven types of inquiry activities. Moreover, the study examined inquiry activities related to essential learning contents in detail and found that there were more diverse than types of inquiry activities.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• (The) Research of the performance art and culture
• /
• no.40
• /
• pp.223-268
• /
• 2020

In contemporary Theatre, the case of inducing direct communication between the audience and the performance is prominent. Especially with the development of digital technology, the audience wants a personalized experience. The emergence of 'immersive Theatre' in this trend has attracted great attention both at home and abroad. In particular, the most important role in the emergence of the concept of 'immersive Theatre' is the British punchdrunk Theatre. Their representative performance began to premiere in London in the UK in 2003 and has expanded to include New York and China in Shanghai and continues to be extremely popular until 2019. In general, a review of existing studies on the role of the audience in shows that the focus is on the participation of the audience. What experience will be given to the audience can not be emphasized in contemporary Theatre. In order to satisfy the diverse needs of the audience, contemporary Theatre are increasingly showing complexity that cannot be explained by any one theory. The same goes for . This is because each audience wants a personalized experience, and there are differences in experience depending on the environment in which the audience also grew up, knowledge, culture, and taste. This study selected Punch Drunk's as a performance that can represent contemporary Theatre, and conducted a study on the role of audience in contemporary Theatre. To this end, we have historically explored past discussions about the role of the audience and discussed the characteristics of the role of the audience in contemporary Theatre. Next, I analyzed in detail the experience of the researcher "He" who watched the performance with the researcher on the role of the audience in . In conclusion, the experience of the audience in is diverse and complex. In other words, the role of the traditional audience in the proscenium play, as well as the audience as a participant in the post-drama play, was also complex in the performance. And this complexity was not a coincidence, but a planning strategy for the Punchdrunk Theatre. Therefore, when discussing the role of the audience in contemporary Theatre, there should be a discussion that clearly sees the complex characteristics of contemporary Theatre through the approach from various perspectives, rather than merely one view of the audience as a participant. something to do.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.12
• /
• pp.425-435
• /
• 2018

The purpose of this study is to investigate the cultural value as well as business value of Juk-Bang-Ryeum(fishing instrument made by bamboo weir) by the investigation of remains in Gyeongnam Sacheon area and reviewing various historical literatures. The research will contribute to make back data necessary for the registration of World Heritage(UNESCO) and Globally Important Agricultural Heritage Systems(FAO). Fisheries, along with agriculture, have been great significance in human history. In particular, the Fisheries has been considered very important industry due to the geopolitical characteristics of our country surrounded by the sea. We can imagine may types of fishing practices and instruments at the agricultural age. Nonetheless, there are a few fishery heritages such as collecting and hunting tools that remains today. Fortunately, there are many Juk-Bang-Ryeum which is actually operate now from the past 500 years ago at the The Sacheon and Namhae areas. We could found some literature records about it in the historical ancient literatures. We could also infer that Juk-Bang-Ryeum was an important fishery resource of the country for a long time. It was built on the basis of scientific principles to capture fishes using the rapid tide of the natural geological straits, and it prove the wisdom of our ancestors. We also could found some unique cultural heritages that was important to the local community. Naturally, it has been managed as an important asset for the residents. In addition to such historical and humanistic values, it also has business and educational value. It can be useful to understand scientific fishery principles as well as fishery experience field. It has business value as an important tourism resource in the region in connection with historical relics and geological environment resources. In conclusion, it is a valuable asset to be handed down as a valuable cultural heritage.