• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.50-55
• /
• 1999

In this paper we proposed a variable optical attenuator using the side polished fiber coupled with a refractive index matching liquid. Small variation of refractive index of matching liquid can induce very large change of optical loss due to the coupling between the fiber mode and radiation mode. The thermo-optic effect of matching liquid was used to ontrol the optical attenuation. The side polished fiber block was fabricated using the silicon V gloove. Experimental results showed that $5^{\circ}C$ temperature variation was enough to adjust full range attenuation. The polarization dependent loss and insertion loss of the fabricated devices were 0.5dB and 0.2dB respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.166-170
• /
• 2000

Amorphous calcium carbonate was prepared by wet chemical method and performed the control of their shape using crystalline calcium carbonate that prepared from oyster shell by the $CO_2$ gas blowing method. As a result, amorphous calcium carbonate was obtained by the dissolution process of crystalline calcium carbonate in the dil-HC1 solution, mixing of sodium carbonate solution, precipitation and filtering with high speed. And using the amorphous calcium carbonate of mud type, crystalline calcium carbonates with cubic, needle, spindle, spherical and plate shape were obtained in the temperature rang of 2~$85^{\circ}C$ and reaction time range of 5~60 minute.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.825-828
• /
• 2009

고형원료인 폐기물의 감량화 및 자원화 기술 중 가장 대표적인 기술로 폐기물의 소각(incineration)기술과 가스화(gasification)용융기술을 들 수 있다. 폐기물 가스화 기술은 폐기물 내의 탄소, 수소 성분을 가스화하여 CO, $H_2$가 주성분인 합성가스(synthesis gas, syngas)로 전환하여 불연물은 용융되어 환경적으로 무해한 슬래그로 회수하는 기술이다. 폐기물 가스화 용융 시스템으로 발생된 합성가스를 재순환하여 사용하는 합성가스 재순환시스템을 통해 가스화에 필요한 열을 시스템 내에서 대체하여 사용하는 기술개발은 폐기물 가스화 용융기술의 경제성을 높일 수 있다. 본 연구에서는 고형 폐기물 가스화반응에 의해 발생되는 합성가스를 재순환하여 폐기물 가스화 용융 시스템내의 자체 에너지원으로 활용할 수 있도록 하는 합성가스 재순환 시스템 및 버너의 운전특성을 고찰하였다. 합성가스의 재순환 장치에서의 운전 압력 제어 및 유량제어를 통해서 안정적인 합성가스 재순환 성능과 재순환버너의 연소 성능을 유지할 수 있었다. 합성가스 재순환버너에 의한 16,800 $kcal/Nm^3$ 조건 및 33,600 $kcal/Nm^3$ 조건에서 운전시에도 가스화기의 운전온도는 안정적으로 유지됨에 따라 생산된 합성가스의 가스화기 보조연료 대체 및 에너지절감이 가능한 것으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.76-76
• /
• 2013

Scanning Tunneling Microscopy는 개인용컴퓨터가 보급되고, 저잡음 아날로그 칩들을 구할 수 있으며, 압전세라믹 기술이 발달하기 시작한 1981년 스위스 IBM Zurich 연구소에서 H. Rohrer와 G. Binnig 박사에 의하여 발명되었다. 이 발명 7~8년 이전 미국 표준연구원의 R. Young 박사도 비슷한 시도를 하였지만, 이 때는 제어할 수 있는 컴퓨터가 없었고, 조절 회로의 잡음 레벨도 컸으며, 역학적 진동도 커서 목적을 달성할 수 없었다. STM의 발명 후 32년이 지난 지금, 조절용 컴퓨터의 발전은 물론, 조절용 역되먹임 회로 또한 digital signal processor나 FPGA를 사용하는 형태로 변화하여 전기적 잡음도 현저히 감소하였다 [1,2]. 동시에 측정 에너지 해상도를 개선하기 위하여 세계적으로 여러 그룹이 장치를 1 K 이하에서 작동할 수 있게 제작하였고, 0.3 K에서 작동하는 상업용 제품도 등장하였다. 이 결과 에너지 해상도는 30 meV 에서 2~3 ${\mu}eV$ 감소하였고, 온도변화에 따른 측정 위치의 변화도 피할 수 있게 되었다. 터널링 검침의 화학적 성분을 흡착과 같은 방법으로 조절하여, 공간 해상도는 물론 에너지 해상도도 더욱 줄일 수 있게 되었고, 스핀에 민감한 터널링 제어도 가능하게 되었다. 이제는 금속, 반도체, 초전도체는 물론 분자, 거대분자, 나노 크기의 양자점등도 측정이 가능하게 되었다. 분자진동 측정이 가능하며, 분자의 성분 분석이 가능하게 되었고, 스핀의 전도와 관련된 제반 문제들을 연구할 수 있게 되었다. 지금부터 10년 동안에는 포논의 측정과 전자와 포논 exciton 등이 관여된 다체계 현상, 이들의 동역학적 현상이 측정 가능하게 되었다. 핵자기 공명도 시도되고 있으며 화학적 구명 및 원자들 사이의 결합도 측정 가능하게 될 것이다. 이제 STM은 초고 진공에서 작동하는 Atomic Force Microscopy와 함께 지금까지 고체물리학 실험 장치가 만들어 내지 못하던 새로운 결과를 도출해 낼 것으로 기대한다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.175-180
• /
• 1998

Nd:YAG single crystal widely used as solid state laser was grown by Czochralski method. <111> single crystal with 0.9at% of $Nd^{3+}$ was grown from the Czochralski furnace with a automatic diameter control system. The vertical temperature gradient in the liquid was the major factor that influence the crystal quality, and the crystal diameter was controlled by the home made computer program. The crystal boule with $\phi$50mm$\times$ι100mm effective size was cut, polished, and antireflection coated. The optical evaluation such as absorption spectrum, fluorescence spectrum coincide with typical features of Nd:YAG single crystal. The laser rod was assembled into the CW laser generator with a Kr lamp. The maximum CW laser output was 70 W and the threshold power and efficiency was 1.3kW and 1.64% respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.33-41
• /
• 2001

The digital iron using ${\mu}$ processor is designed and compared experimentally with the conventional analog Iron. Designed digital iron shows two improved temperature control characteristics. First, the reduction of the difference error between the user setting temperature and the real temperature of the iron tip is examined. When the iron temperature is set to $200[^{\circ}C]$, $300[^{\circ}C]$, $400[^{\circ}C]$, $480[^{\circ}C]$ at the environmental temperatures of $-5[^{\circ}C]$ and $25[^{\circ}C]$, it is examined that the tip temperature is very stable and its error is within ${\pm}1.8[^{\circ}C]$. Second, it is conformed that the temperature fluctuation of the iron due to the soldering is reduced manifestly. When the temperature of iron tip is varied from $200[^{\circ}C]$ to $480[^{\circ}C]$ with 1[g] solder, the temperature errors of the analog iron are measured to be from $6[^{\circ}C]$ to $10[^{\circ}C]$. In case of designed digital iron, however, these errors are much smaller and they are from $2[^{\circ}C]$ to $5[^{\circ}C]$.

• Journal of the Korean Magnetics Society
• /
• v.26 no.5
• /
• pp.154-158
• /
• 2016

A CRDM (Control Rod Drive Mechanism) is an electromagnetic device which drives a control rod assembly linearly to regulate the reactivity of a nuclear core. An RPIS (Rod Position Indication System) is used as a position indicator for a control rod assembly of a CRDM of SMART, and an RPIS consists of permanent magnets and reed switches. SMART is designed for the maximum coolant temperature of $350^{\circ}C$, and the permanent magnets are installed inside of the reactor. The reed switches and electrical circuit are installed outside of the reactor on the other hand. Test coil for a reed switch is test equipment for quality verification of a reed switch, and a test coil consists of a coil and core. In this study, magnetic property of test coil and permanent magnet on a reed switch is compared by using finite element electromagnetic simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.51-58
• /
• 2016

As semiconductor technology has developed, device performance has been improved. However, since device structures became smaller, circuit aging due to operational and environmental conditions can be accelerated. Circuit aging causes a performance degradation and eventually a system error. In reliable systems, a failure due to aging might cause a great disaster. Therefore, these systems need a performance degradation prediction function so that they can take action in advance before a failure occurs. This paper presents an on-line circuit performance degradation monitoring scheme for predicting a failure by detecting performance degradation during circuit normal operation. In our proposed scheme, IEEE 1149.1 output boundary scan cells and TAP controller are reused. The experimental result shows that the proposed architecture can monitor the performance degradation during normal operation without stopping the circuit.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.238-240
• /
• 1993

In this paper, back-propagation neural network is used to implement a controller for electric furnace. Although the dynamics of furnace is nonlinear and time-delayed and depends on the environment, the time constant is relatively large so that manual control based on human expert can have good performance. The input-output data of the manual controller are collooted and used as training data for neurocontroller. From simulation. we find that the neurocontroller has better performances than the conventional controller.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.194-201
• /
• 2012

Moxibustion is utilized not only to cure disease but also to increase immunity. However, it may lead to undesired effects including severe pains(blisters and burns) because of the difficulty of controlling heat intensity. To overcome these problems we developed the RF heat stimulation system which can control stimulus. Also, we developed the RF stimulation protocol for effective heat transfer in subcutaneous tissue of rabbit. RF stimulator consists of a medical RF capacitive heating device, isolation probe, isolation plate, negative pressure control part and temperature measurement part. For the designed stimulus protocol, we measured the temperature distribution on epidermis and in subcutaneous(5mm, 10mm) area of rabbit during moxibustion. A stimulation protocol was designed by controlling the ON/OFF duty ratio, repeating number, and energy of applied pulse to get the temperature distribution similar with that by moxibustion. In results, the correlation coefficients between temperature distribution by moxibustion and that of stimulator were 95% and 91% from 5mm and 10mm thick respectively. However, temperature distribution on epidermis by stimulator was remarkably lower than that of the moxibustion. Finally, the RF stimulation system showed that it can not only transfer effectively heat similar with moxibustion to the subcutaneous area, but also the influence by unwanted side effects can be minimized.