• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.290-303
• /
• 2003

Modern agriculture has been heavily dependent on chemical fertilizers to meet the food demands of ever increasing population. Progressive depletion of major plant nutrients in soil due to intensive cultivation practices has also necessitated the use of higher dose of chemical fertilizers particularly in soils where the organic matter content is very low. Indiscriminate use of chemical fertilizers and pressure on agriculturists to enhance per area crop yields has led to fast depletion of fossil fuel resources with concomitant increase in the prices of chemical fertilizers and also led to environmental pollution. Hence, the current trend throughout the world is to explore the possibility of using alternate nutrient sources or increasing the efficiency of chemical fertilizers by supplementing them with organic fertilizers and bioinoculants comprising largely microbes like, bacteria, fungi, algae etc to enhance nitrogen and phosphates in the soil thus creating a sustainable agricultural environment. Among the different microbial inoculants or biofertilizers, Azospirillum could be a potential candidate due to its non specific host root colonization. It had the capability to fix $N_2$ in wide pH regimes and even in presence of combined nitrogen. Azospirillum inoculation can increase the crop yield to 10-25% and substitute 25% of recommended doses of nitrogenous fertilizers. Apart from nitrogen fixation, Azospirillum is also involved in the root improvement, the activity which was attributed to an increase in the rate of water and mineral uptake by roots. The ability of Azospirillum to produce phytohormones was reported to enhance the root respiration rate, metabolism and root proliferation. They have also been reported to produce polyhydroxybutyrate, that can be used as a biodegradable thermosplastic. A lot of studies have addressed improvements in enhancing its efficiency to fix nitrogen fixation and hormone production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.273-273
• /
• 2010

고열부하 환경에 노출되는 핵융합로의 플라즈마 대향부품은 주로 낮은 원자번호 물질-열전도가 좋은 물질-구조체의 순으로 다층 구조를 이루고 있으며, 이들 간의 우수한 접합성은 부품의 성능을 좌우하는 핵심 요소이다. 이러한 플라즈마 대향부품의 건전성을 평가하기 위해서는 고열속의 열부하를 반복적으로 인가하는 시험이 요구되며, 이를 위해 본 연구원에서는 KoHLT-1, 2의 시험시설을 운용하고 있다. 본 시설에서는 열부하원으로서 그라파이터 히터를 사용하며, 히터는 두 개의 시험 대상부품 사이에 설치되고, 히터에 고전류를 인가하여 복사열에 의해 시험 부품에 열부하를 가하게 된다. 고열부하 환경에서 열피로 시험을 위해 히터에 인가되는 전류를 시간에 따라 일정한 패턴으로 반복적으로 ON-OFF 하게 된다. 본 논문에서는 이러한 고열부하시험을 수행함에 있어 고려해야 할 여러 가지 요소에 대해 논의하였다. 우선 인가하는 열유속(heat flux) 값은 일차적으로 시험시설의 최대 출력에 의해 좌우되며, 시험대상물의 운전조건 및 열부하 반복횟수에 의해 결정된다. 열부하 반복횟수는 주어진 열유속 값에 대해 total strain이 파단에 이르는 수준에 의해 결정된다. 열부하를 인가하는 시간은 히터에 전류를 인가했을 때 요구되는 온도로 상승하는 데 걸리는 시간과 시험대상물의 온도가 더 이상 증가하지 않는데 걸리는 시간에 의해 좌우된다. 냉각시간은 길수록 시험대상물의 온도가 냉각수의 온도에 접근하게 되나 너무 길어지면 시험시간이 급격히 증가하게 되므로, 온도 감소 곡선을 검토하여 적절한 시간을 정하게 된다. 열유속 측정은 냉각수의 온도 상승값과 유량으로부터 계산하게 되며, 정확한 측정을 위해서는 열부하를 인가하는 시간이 충분히 길어야 한다. 또한 시험대상 부품에서 열부하가 인가되는 면적을 정확히 정의해야 하며, 냉각관로에 열부하가 인가되어서는 않된다. 또한 시험대상부품을 지지하는 지지구조체를 통한 열손실을 최소화해야 정확한 열유속을 측정할 수 있다. 시험대상부품을 설치할 때 히터와의 간격 또한 결정해야 할 중요한 요소이며, 간격이 좁을수록 최대 열유속 값을 증가시킬 수 있으나, 너무 가까운 경우 히터의 열변형에 의한 접촉 및 아크 방전의 가능성이 있으며, 이 경우 히터와 시험대상부품의 손상을 가져오게 된다. 시험대상물이 국제열핵융합로(ITER)의 일차벽과 같이 베릴륨이 포함되어 있는 경우 방전에 의한 손상은 인체에 유해한 오염의 원인이 될 수 있다. 또한 순간적인 방전은 고가의 고전류전원의 고장을 유발할 수도 있다. 열부하 시험 중 시험대상물의 온도를 정확히 측정하는 것은 필수적이며, 온도 변화 곡선으로부터 시험대상물의 건전성 여부를 판단할 수 있다. 이를 위해 변화를 가장 잘 탐지 할 수 있는 위치에 온도 센서를 설치하는 것이 관건이며, 이는 사전 분석을 통해 알 수 있다.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.254-261
• /
• 2014

The transformer is a static electrical device that transfers energy by inductive coupling. Then, heat is occurred at coils, inner transformer was filled with insulating oils for cooling and insulation. Although mineral oil as insulating oil has been widely used, it does not meet health and current environmental laws because it is not biodegradable. Therefore, in this study, the diglycerol ester was synthesized with diglycerol and fatty acids (oleic acid and caprylic acid) over various catalysts for insulating oil having biodegradability, high flash points and low pour points. The sulfated zirconia ($SO_4{^{2-}}/ZrO_2$) catalyst prepared at different calcination temperature shows the highest conversion of fatty acids at $600^{\circ}C$ due to crystallinity and high density of acid sites per surface area. When the molar ratio of oleic acid and caprylic acid is 1:3, the diglycerol ester shows superior insulation properties that are the flash point of $306^{\circ}C$ and pour point of $-50^{\circ}C$. The insulation properties of synthesized diglycerol ester shows the pour point of $-50^{\circ}C$ and the flash point of over $300^{\circ}C$. Therefore, diglycerol ester is superior to the vegetable oils in insulation properties.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.468-480
• /
• 2007

The urbanization is altering the hydrology, water quality, channel form of waterway and changing the composition of biological communities in the aquatic ecosystem. Recently, towns grew bigger by the drift of large numbers of people and the medium and small leather and dyeing industries around the Pocheon and Youngpyeong streams. The discharges of sewage were increased by them. The UII (urban intensity index) was 85 (st. P-3) and 91 (st. P-6) in the Pocheon stream and about 20 in the Youngpyeong stream. A total 141 taxa of epilithic diatoms which were composed of 2 order, 8 family, 30 genera. Dominant species were Navicula saprophila, N. subminuscula, Nitzschia palea, Gomphonema pseudoaugur in the Pocheon stream and Achnanthes alteragracillima, A. convergens, A. minutissima, N. minima, N. fonticola, N. frustulum and Cymbella minuta var. silesiaca in the Youngpyeong stream. It Showed the different composition of dominant species by the urbanization near two streams. In the relationships between UII and environmental factors such as EC, BOD, COD, TN, TP and DAIpo, UII showed the high relations $(r^2>0.8)$. It was the difference of organic pollution according to urbanization. It therefore, was higher the relative abundance and more the numbers of saprophilous taxa in the Pocheon stream than the Youngpyeong stream. The water quality of two streams by biological indicators(DAIpo) was polysaprobic state(st. P-3, P-4, P-5) in the Pocheon stream and was oligosaprobic (Y-1), mesosaprobic (Y-2, 3) and polysaprobic state (Y-4) in the Youngpyeong stream during the investigation periods.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.283-287
• /
• 2014

This study determined the hazardous heavy metal content of mushrooms from markets in Seoul, Korea. One hundred and fifty mushroom samples were digested by the microwave method then the hazardous heavy metal (Pb, Cd, As, Cr, Ni and Hg) content was determined by the inductively coupled plasma-mass spectrometry (ICP-MS) and mercury analyzer. The average values of heavy metals in the samples were as follows: (mean [minimum-maximum], ${\mu}g/kg$); Pb 7.8 (1.9-30.0), Cd 45.3 (0.7-292.4), As 54.6 (24.2-229.3), Cr 42.6 (8.4-334.3), Ni 22.4 (up to 180.4), and Hg 8.9 (2.0-25.0). The contents of hazardous heavy metal in mushrooms were lower than those reported previously and also lower than the Provisional Tolerable Weekly Intake (PTWI) limit prescribed by the FAO/WHO. Thus, it could be suggested that the hazardous heavy metals levels in the mushrooms of retail market were adequately safe for consumption.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.456-460
• /
• 2012

This study was carried out as a survey on the level of lead (Pb), cadmium (Cd), arsenic (As) and mercury (Hg) in 5 items of agricultural products (lettuce, pumpkin, head lettuce, cabbage and crown daisy) for which safety guidelines are not yet established in Korea. The 407 samples were collected from local markets in 9 regional places and the levels of metals were measured by ICP-MS and mercury analyzer. The average levels of Pb, Cd, As and Hg were 0.026, 0.018, 0.008 and 0.003 mg/kg for lettuce, 0.002, 0.001, 0.001 and 0.0006 mg/kg for pumpkin, 0.002, 0.005, 0.001 and 0.0005 mg/kg for head lettuce, 0.001, 0.002, 0.0002 and 0.0006 mg/kg for cabbage and 0.022, 0.014, 0.006 and 0.004 mg/kg for crown daisy. For risk assessment, the daily dietary exposures of Pb, Cd and Hg by intake of these agricultural products were calculated and compared with PTWI (provisional tolerable weekly intake) established by JECFA. The daily dietary exposure of heavy metals by intake of these agricultural products were 0.13, 0.56 and 0.09% of PTWI, respectively. These monitoring results will be utilized as fundamental data for the establishment of Korean standards of Pb, Cd, As and Hg in 5 items of agricultural products and valuable source for DB construction for science-based safety control of heavy metals in foods including agricultural products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3345-3350
• /
• 2014

We investigated to assess the relationships between the major nutrients and phytoplankton dynamics during the spring season in 2010 and 2011 at 23 stations in Jinhae Bay, Korea. The bay is divided into four different zones based on pollutant sources and geographical characteristics. Nutrient limitation (>80%) was significant in Zone II, which is located in central bay and is influenced by the water well mixed from outer bay. The limited nutrient was followed in Zone III and IV that was occupying between 17% and 83%. However, the low levels are being kept below 35% in Zone I, which is characterized by the semi-enclosed eutrophic area of Masan and Haegam bays. Based on the PCA (principle component analysis) analysis, the nitrogen (N) sources in 2010 were particularly dominant and it may be due to the water mixing and wastewater formed from bottom layers and sewage. In 2011, major nutrients including nitrogen, silicon and phosphorus were dominant in the bay and are supplied by the river discharge after rainfalls with low salinity conditions. In particular, the N nutrients being supplied in 2010 are correlated with pennate diatoms Pseudo-nitzchia spp. and is not related to the phytoplankton population densities in 2011. The present study suggests that N sources play an important role in the proliferation of diatom, and the rapid nutrient uptakes by them are potential nutrient limitation factors in the bay.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.549-559
• /
• 2005

Sustainable industrial development which can minimize an ecological effect by the mankind exertion is recently interested due to an environmental contamination and a resource exhaustion problem. An eco-industrial park (EIP) is a community of manufacturing and service businesses seeking enhanced environmental and economic performance through collaboration in managing environmental and resource issues, including energy, water, and materials. EIP developments which improve a production plant within an eco-friendly greenfield and design a new industrial ecosystem are accomplished recently, which can efficiently re-use the waste and resources from each company within EIP. In this review, the outside and domestic case studies of EIP and cornerstone technologies to develop the EIP, such as energy integration, waste reuse, mass flow analysis, water pinch, and life cycle assessment, are summarized.

• Journal of Radiation Industry
• /
• v.9 no.4
• /
• pp.209-216
• /
• 2015

It has been about 5 years since the Fukushima nuclear power plant accident, which contaminated large area with radioactive materials. It is necessary to assess radiation dose to establish evacuation areas and to set decontamination goal for the large contaminated area. In this study, we assessed temporal trend of radiation dose to the public living in the large area contaminated with radioactive materials after the Fukushima nuclear power plant accident. The dose assessment was performed based on Chernobyl model and RESRAD model for two evacuation lift areas, Kawauchi and Naraha. It was reported that deposition densities in the areas were $4.3{\sim}96kBq\;m^{-2}$ for $^{134}Cs$, $1.4{\sim}300kBq\;m^{-2}$ for $^{137}Cs$, respectively. Radiation dose to the residents depended on radioactive cesium concentrations in the soil, ranging $0.11{\sim}2.4mSv\;y^{-1}$ at Kawauchi area and $0.69{\sim}1.1mSv\;y^{-1}$ at Naraha area in July 2014. The difference was less than 5% in radiation doses estimated by two different models. Radiation dose decreased with calendar time and the decreasing slope varied depending on dose assessment models. Based on the Chernobyl dosimetry model, radiation doses decreased with calendar time to about 65% level of the radiation dose in 2014 after 1 year, 11% level after 10 years, and 5.6% level after 30 years. RESRAD dosimetry model more slowly decreased radiation dose with time to about 85% level after 1 year, 40% level after 10 years, and 15% level after 30 years. The decrease of radiation dose can be mainly attributed into radioactive decays and environmental transport of the radioactive cesium. Only environmental transports of radioactive cesium without consideration of radioactive decays decreased radiation dose additionally 43% after 1 year, 72% after 3 years, 80% after 10 years, and 83% after 30 years. Radiation doses estimated with cesium concentration in the soil based on Chernobyl dosimetry model were compared with directly measured radiation doses. The estimated doses well agreed with the measurement data. This study results can be applied to radiation dose assessments at the contaminated area for radiation safety assurance or emergency preparedness.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.263-268
• /
• 2008

Estimates of genetic gain (in volume growth) and diversity (expressed as status number, $N_s$) were determined in a clonal seed orchard of Pinus koraiensis. The genetic thinning was based on clonal breeding values (represented by general combining ability) obtained from progeny tests, clonal fertility estimated by strobilus production, and clonal size variation determined by the ramet numbers per clone. Parental GCA values for volume growth were calculated, based on height and diameter at breast height measured from field trials. Clonal fertility was estimated from the assessments of strobilus production over twelve years from 1991 to 2003, and used for the calculation of status number. There are 179 clones and 5,268 ramets in 12ha area of P. koraiensis clonal seed orchard. Genetic gain and diversity estimates were determined under assumptions of 30% pollen contamination and inferior genetic value of contaminating pollen. Genetic gain increased as thinning rates were set from 10% to 60%. However, for the higher thinning intensities, the increase of genetic gain was not remarkable. Genetic thinning by means of truncation selection resulted in a greater genetic gain but a large decrease in status number. Status number was represented around 40 clones for 10% through 60% thinning intensities, but for the higher thinning intensities, it was a bit fluctuated. Based on the present results, it could be concluded that thinning rate should not be stronger than 60% to optimize genetic gain while conserving genetic diversity. Consequently 50% or 60% thinning rate might be appropriate for genetic thinning in the clonal seed orchard of P. koraiensis. The effect of pollen contamination on the genetic gain and the consequence of genetic thinning for seed production in the clonal seed orchard, and seed orchard management scheme were also discussed.