• The Korean Journal of Applied Statistics
• /
• v.33 no.2
• /
• pp.161-170
• /
• 2020

The combined ${\bar{X}}-S^2$ chart is a traditional control chart for simultaneously detecting mean and variance. Control limits for the combined ${\bar{X}}-S^2$ chart are determined so that each chart has the same individual false alarm rate while maintaining the required false alarm rate for the combined chart. In this paper, we provide flexibility to allow the two charts to have different individual false alarm rates as well as evaluate the effect of flexibility. The individual false alarm rate of the ${\bar{X}}$ chart is taken to be γ times the individual false alarm rate of the S² chart. To evaluate the effect of selecting the value of γ, we use the out-of-control average run length and relative mean index as the performance measure for the combined ${\bar{X}}-S^2$ chart.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.1
• /
• pp.92-99
• /
• 1996

2단계 접속 논리(two-stage cascaded logic)는 관측 지역 내에 새로이 출현한 표적에 대한 트랙을 만드는 대표적인 방법중의 하나이다. 2단계 접속 논리의 트랙 생성 (track formation)에 관한 성능 평가 방법 및 결과는 Bar-Schalom에 의해 발표된 바가 있으나, 그 연구 결과는 트랙 생성 성능을 도출할 때 클러터로 인한 오경보율(false alarm probability)을 무시한다는 가정에 기초한 것이기 때문에, 오경보율이 높은 경우에는 적용 할 수 없다는 단점을 지닌다. 이에 본 논문에서는 오경보율을 고려하여 2단계 접속 논리의 트랙 생성 성능을 평가 할 수 있는 개선된 방법을 제시하고자 한다. 그리고 2단계 접속 논리에서 사용하는 데이터 연관(data association)기법으로 트랙 분리(track splitting)기법과 최 근접 데이터 선택 기법(nearest neighbor rule)을 사용하는 경우에 대하여 각각의 성능 평가 결과를 몇 가지 예시하고자 한다.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.549-552
• /
• 2000

본 논문에서는 주파수 영역 배열안테나의 계산량을 감소시키기 위한 센서링 부분적응 알고리듬을 제안한다. 제안한 알고리듬은 입력신호를 주파수 영역으로 변환한 후 CFAR(constant false alarm rate) 검파기법을 이용하여 간섭신호가 존재하는 주파수 대역을 찾아내고 이에 해당하는 가중치에 대해서만 적응 신호처리를 수행한다. 이때 CFAR 검파기의 오경보율은 출력신호의 전력 변화량을 이용하여 환경에 맞게 적응적으로 변화시켜서 최적 값으로 설정한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.83-92
• /
• 2018

Using ground moving target indicators equipped with synthetic aperture radars for locating moving targets within a wide background clutter in a short time is an excellent method for monitoring traffic. Although the displaced phase center antenna (DPCA) technique and along track interferometry (ATI) are real time methods with low computational complexity, they are essential for reducing cases of false alarm that can result in poor performance. In this paper, we propose two detection methods using DPCA and ATI-the parallel fusion method and serial fusion method. Simulation results demonstrate that the proposed detection methods are characterized by low probability of false alarm along with good performance. In particular, the serial fusion method possesses high detection probability along with low probability of false alarm (1/5th of the false alarm probability of the DPCA technique).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.853-864
• /
• 2017

This paper proposes a false alarm rate reduction technique for detection of small targets in a terrestrial environment. CFAR algorithm is useful in homogeneous background, but it is not easy to detect targets in non-homogeneous background. In particular, when the clutter power is not significantly different from the target signal, it is difficult to detect the target due to high false alarm rate. To solve these difficulties, this study presents the false alarm rate reduction technique based on CFAR algorithm, matched filter and binary integration technique. The parameters are studied through the theoretical analysis and the validity of the proposed study is examined by the test results.

• Convergence Security Journal
• /
• v.15 no.1
• /
• pp.27-36
• /
• 2015

A discussion on false alarm is a series of problems about a waste of police resources. The the false alarm primarily increase machine the cost of security firm but ultimately increase the costs of national and social management. Verified Report System has been in operation since July 1, 2013, We could analyze the actual operation of 112 report on false alarm rate was 82.4% before this system launched, but after implementation of the Verified Report System, this rate level downs below 69.7% records. So 12.7% is declined at the rate of false alarm. However, the actual alarm rate of Electronic Security itself is just only 0.3 % in the total number of cases responding in contrast to Police is considerable. It is more urgent to evolve the Verified Report System, so penalty system against the false alarm, Police registration system of sensors, and strengthening of the task of the company for installation and management of detection equipment are urgently needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.703-711
• /
• 2016

IDS (Intrusion Detection System) is used to detect network attacks through network data analysis. The system requires a high accuracy and detection rate, and low false alarm rate. In addition, the system uses a range of techniques, such as expert system, data mining, and state transition analysis to analyze the network data. The purpose of this study was to compare the performance of two data mining methods for detecting network attacks. They are Support Vector Machine (SVM) and a neural network called Forward Additive Neural Network (FANN). The well-known KDD Cup 99 training and test data set were used to compare the performance of the two algorithms. The accuracy, detection rate, and false alarm rate were calculated. The FANN showed a slightly higher false alarm rate than the SVM, but showed a much higher accuracy and detection rate than the SVM. Considering that treating a real attack as a normal message is much riskier than treating a normal message as an attack, it is concluded that the FANN is more effective in intrusion detection than the SVM.

• Journal of KIISE:Databases
• /
• v.34 no.6
• /
• pp.473-482
• /
• 2007

Network-based IDS(Intrusion Detection System) gathers network packet data and analyzes them into attack or normal. They raise alarm when possible intrusion happens. But they often output a large amount of low-level of incomplete alert information. Consequently, a large amount of incomplete alert information that can be unmanageable and also be mixed with false alerts can prevent intrusion response systems and security administrator from adequately understanding and analyzing the state of network security, and initiating appropriate response in a timely fashion. So it is important for the security administrator to reduce the redundancy of alerts, integrate and correlate security alerts, construct attack scenarios and present high-level aggregated information. False alarm rate is the ratio between the number of normal connections that are incorrectly misclassified as attacks and the total number of normal connections. In this paper we propose a false alarm classification model to reduce the false alarm rate using classification analysis of data mining techniques. The proposed model can classify the alarms from the intrusion detection systems into false alert or true attack. Our approach is useful to reduce false alerts and to improve the detection rate of network-based intrusion detection systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.172-180
• /
• 2012

In multi-static sonar for detecting an underwater target, received signals contain the target echo, reverberation and clutter. Clutter and reverberation are main causes of increasing the false alarm rate. MRAL classifies received signals according to the spatial similarity, and it regards classified signal as reflected signals from a reflector. MRAL reduces the false alarm rate this way. However, the results of MRAL can have localization errors. In this paper, an MRAL post processing algorithm is proposed to reduce the localization errors with the least square (LS) method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.719-729
• /
• 1992

An improved MXTM (maximum trimmed mean) -CFAR (constant false alarm rate) processor is proposed to reduce false alarm rates In detecting radar targets and Its performance character is ticsare analyzed to be compared with those of other CFAR processors. The proposed MXTM-CFAR processor is obtained by combining the GO (greatest of ) -CFAR processor reducing excessive falsealarm rate at riutter edges with the TM-CFAR processor showing good performances In homo-geneous Jnonhornog eneous background. Performance analyses have been done by computing detection probability, constant false alarm rate and detection thresholds under the homogeneous or multiple target environments and at the clutter edges. Analysis results how that the proposed CFAR processor maintains its performance as good as those of,05(order statistics) and TM-CFAR inhomogeneous and multiple target environments and Can reduce the false alarm rate at clutter edges. Overall computing time hfs been also reduced.