• Journal of radiological science and technology
• /
• v.44 no.2
• /
• pp.101-107
• /
• 2021

The purpose of this study was to evaluate optimal CT scan parameters to minimize patient dose to the irradiation and maintain satisfactory image quality in low-dose chest computed tomography (CT) scans. In a chest anthropomorphic phantom, chest CT scans were performed at different kVp and mA within reference of 3.4mGy in volume CT Dose Index (CTDI_vol). The following quantitative parameters had been statistically evaluated: image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and figure of merit (FOM). Nine radiographers conducted the blind test to select the optimal kVp-mA combination. Results indicated that the kVp-mA combination of 80kVp-90mA, 100kVp-50mA, 120kVp-30mA and 140kVp-30mA were obtained high SNR and CNR. The 120kVp-30mA combination offered good compromise in the FOM, which showed the quality and dose performance. In the blind test, an image of 80kVp-90mA obtained a high score with 4.7 points, and 120kVp-10mA or 140kVp-10mA with a low tube current were observed severe noise and poor image quality, thus resulting in decreased diagnostic accuracy. On the other hand, in the combination of high kVp and high mA(140kVp-90mA), the image quality was improved, but the radiation dose was also increased. the FOM value of 140kVp-90mA was lower than 120kVp-30mA. The application of appropriate scan parameters in low-dose chest CT scans produced satisfactory results in dose and image quality for the accuracy of the clinical diagnosis.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.6
• /
• pp.243-250
• /
• 2019

Because of a moving UAV has a lot of potential/kinetic energy, if the UAV falls to the ground, it may have a lot of impact. Because this can lead to human casualities, in this paper, the population density area on the UAV flight path is defined as a dangerous area. The conventional UAV path flight was a passive form in which a UAV moved in accordance with a path preset by a user before the flight. Some UAVs include safety features such as a obstacle avoidance system during flight. Still, it is difficult to respond to changes in the real-time flight environment. Using public Big Data for UAV path flight can improve response to real-time flight environment changes by enabling detection of dangerous areas and avoidance of the areas. Therefore, in this paper, we propose a method to detect and avoid dangerous areas for UAVs by utilizing the Big Data collected in real-time. If the routh is designated according to the destination by the proposed method, the dangerous area is determined in real-time and the flight is made to the optimal bypass path. In further research, we will study ways to increase the quality satisfaction of the images acquired by flying under the avoidance flight plan.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.879-886
• /
• 2018

A 3-dimensional (D) printer is a device capable of outputting a three-dimensional solid object based on data modeled in a computer. These features are utilized in the bone model X - ray phantom production etc using CT data by fusing with the radiation science field. A bone model phantom was made using data obtained by CT scan of an existing Pelvis phantom, using PLA, Wood, XT-CF20, Glow fill, Steel filaments which are materials of Fused Filament Fabrication (FFF) 3D printer.Measure Hounsfield Unit (HU) with images obtained by CT scan of the existing Pelvis phantom and five material phantoms made with 3D printer under the same conditions,SI and SNR were measured using a diagnostic X-ray generator, and each phantom was compared and analyzed.As a result, the X - ray phantom in the X - ray examination condition of the limb was found to be most suitable for the glow fill filament.The characteristics of the filament can be known to the base of this research and the practicality of X - ray phantom fabrication was confirmed.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.85-92
• /
• 2019

Yun Dong - ju's poetry and his representations are used in various visual and dramatic media. According to its medium and genre characteristics, Yoon Dong - ju's representations and his poems are selected and changed. It is also the process of reading what the text is trying to convey to the public through a single person. In this study, Yoon Dong - joo's poetry was compared with other poetry of poetry. Particularly, the discussion was focused on the creative actor . If the creative drama is transmitting the feelings of Yoon Dong-ju through the city, the film conveys the poem of Yoon Dong-ju. Gamuplays are more restrictive than the movies because of their genre. As a result, the emotional expressions of the characters are more intense, the progress of the narrative is also dramatic, and the aspect of Yun Dong - ju, a poem illuminated by the movie and the drama, also differs. If the film aims to portray poet Yoon Dong-ju as a genuine literary youth, the creative poet reinterprets Yun's poetry as having a meaning of resistance.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.39-44
• /
• 2019

Radiation safety management is being considered very important since radioactive isotopes such as Co-60 and Ir-192 are widely used in fields such as non-destructive test(NDT). In this study, the applicability of Mercury(II) Iodide($HgI_2$) source for tracing system was evaluated. To make sure the unit cell sensor's reliability, we evaluated the electrical properties of the sensor made with $HgI_2$, and then position dependence of the sensor was analyzed and compared with the dose distribution from the planning system. As a result of the evaluation, high reliability of the sensor was shown through the linearity of R-sq > 0.990 and reproducibility of CV < 0.015. In the position dependence evaluation, the maximum value was measured at the isocenter of the sensor and gradually decreased according to the distance. However, the dose distribution data from the planning system was turned out that has difference with that of the sensor up to 30%. This seems to come from the difference between single-point measuring based planning system and area measuring based sensor.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.111-122
• /
• 2019

This study suggests that even if the consulting is started by the consulting of the company, it is difficult for the consulting firm to operate the consulting firm Consulting performance differs depending on the degree of understanding of consulting. Although consulting firms have been studying various prior research papers in view of the fact that there are many cases where they proceed with the sales strategy of repurchasing in mind, most of them deal with research on consulting performance on the supplier side, The purpose of this study is to investigate whether a company has a high level of participation in consulting in the event of a situation or situation and consequently influences the intention to purchase consulting. In order to find out whether they are visible, the reliability of the measured values and the fit of the measurement model by CFA were obtained through the exploratory factor analysis. The results were as follows: The results of this study are as follows. As a result of the study, it is necessary for the consultant to improve the participation of the consulting company and the understanding of the consulting in order to increase the intention of the consulting repurchase intention. Since the consultant shows the result in an empirical way, the consulting company participates in the role and process The results of this study are as follows. First, it is suggested that firms should be very careful about the participation and consulting understanding because they affect the repurchase intention of consulting firms.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.3
• /
• pp.21-33
• /
• 2021

Rice straw management and winter crop cultivation are crucial components for the accurate estimation of paddy methane emissions. Field-based extensive investigation of paddy organic matter management requires enormous efforts however it becomes more feasible as drone technology advances. The objectives of this study were to identify paddy fields of straw application and winter crop cultivation using drone images and to apply for the estimation of yearly methane emission. Total 35 sites of over 150ha in area were selected nationwide as the study areas. Drone images of the study sites were taken twice during summer and winter in 2018 through 2019: Summer images were used to identify paddy cultivation areas, while winter images for straw and winter crop practices. Drone-image-based identification results were used to estimate paddy methane emission and compared with conventional method. As the result, mean areas for paddy, straw application and winter crop cultivation were 118.9ha, 12.0ha, and 11.3ha, respectively. Overall rice straw application rate were greater in Gyeonggi-do(20%) and Chungcheongnam-do(12%), while winter crop cultivation was greatest in Gyeongsangnam-do(30%) and Jeolla-do(27%). Yearly mean methane emission was estimated to be 226.2kg CH₄/ha/yr in this study and about 32% less when compared to 331.8kg CH₄/ha/yr estimated with the conventional method. This was primarily because of the lower rice straw application rate observed in this study, which was less than quarter the rate of 55.62% used for the conventional method. This indicates the necessity to use more accurate statistics of rice straw application as well as winter crop practices into paddy methane emission estimation. Thus it is recommended to further study to link drone technology with satellite image analysis in order to identify organic management practices at a paddy field level over extensive agricultural area.

• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.6-19
• /
• 2021

Subsurface physical properties can be obtained and imaged by seismic exploration, and various algorithms have been developed for this purpose. In this regard, root mean square error (RMSE) has been widely used to quantitatively evaluate the accuracy of the developed algorithms. Although RMSE has the advantage of being numerically simple, it has limitations in assessing structural similarity. To supplement this, full-reference image quality assessment (FR-IQA) techniques, which reflect the human visual system, are being investigated. Therefore, we selected six FR-IQA techniques that could evaluate the obtained physical properties. In this paper, we used the full-waveform inversion, because the algorithm can provide the physical properties. The inversion results were applied to the six selected FR-IQA techniques using three benchmark models. Using salt models, it was confirmed that the inversion results were not satisfactory in some aspects, but the value of RMSE decreased. On the other hand, some FR-IQA techniques could definitely improve the evaluation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.179-185
• /
• 2021

We performed to explore the applicability of protocol to improve the curriculum literacy for special education pre-teachers. For this, protocol of Park et al (2018), which can be used in the educational field, was partially modified and applied to enhance the special education curriculum expertise of pre-teachers. The literacy protocol of the special education curriculum was applied as Protocols 1 and 2, and Protocol 1 was focused on adaptation the 2015 special education curriculum and understanding literacy. Protocol 2 consisted of reorganizing the subject level centering on the five subjects presented in the special education curriculum, and establishing an integrated theme setting and reorganization plan. We applied the research design during a total of 15 weeks of special education curriculum subjects. The class format was flipped learning (e.g, pre-video lectures, theory lectures (E-Sheets), and learner-led activities (W-Sheets) for each topic was carried out. We found that pre-teachers' thought that the academic achievement and satisfaction of students with disabilities could be increased by adaptation the curriculum. Pre-teachers reported that the experience of reorganizing each subject/intersection helped improve their literacy but found it difficult.