• Journal of the Korean Society of Earth Science Education
• /
• v.10 no.3
• /
• pp.262-277
• /
• 2017

Digital textbooks enable learning that is appropriate to the characteristics and level of learners through various interactions. The purpose of this study was to develop an instruction model that can more effectively use digital textbooks in elementary science classes and to verify its effectiveness. The results were as follows. The instruction model for helping learners complete their learning by using digital textbooks needs to receive diagnostic assessment and feedback on entry behavior, to build a self-directed learning environment, and to interact with teachers, students, and digital textbooks as scaffolding. In this study, we developed an instruction model using digital textbooks reflecting these characteristic. The instructional model consists of preparation, practice and solidity step. In the preparation step, the learner performs a diagnostic evaluation using digital textbooks. Based on the results, feedback provided at each level can complement the entry behavior and maintain interest in learning activities. In the practice step, self-directed learning is implemented using diverse functions of digital textbooks and various types of data. In the solidity step, learners can internalize the learning contents by reviewing video clips which are provided by teachers, performing problem-solving activities, and accessing outcomes accumulated by learners in the community online. In order to verify the effectiveness of this model, we selected the "Weather and our Life" unit. This experiment was conducted using 101 students in the 5th grade in B Elementary School in Gwangju Metropolitan City. In the experimental group, 50 students learned using a smart device that embodies digital textbooks applied with the instruction model. In the comparative group, 51 students were taught using the paper textbooks. The results were as follows. First, there was a significant effect on the improvement of the learning achievement in the experimental group with low academic ability compared with the comparative group with low academic ability. Second, there was a significant effect on self-directed learning attitude in the experimental group. Third, in the experimental group, the number of interactions with the learner, teacher, and digital textbook was higher than the comparative group. In conclusion, the digital textbooks based on the instruction model in elementary science classes developed in this study helped to improve learners' learning achievement and self-directed learning attitudes.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.2
• /
• pp.69-78
• /
• 2011

Rice is one of the world's staple foods. Paddy rice fields have unique biophysical characteristics that the rice is grown on flooded soils unlike other crops. Information on the spatial distribution of paddy fields and the timing of irrigation are of importance to determine hydrological balance and efficiency of water resource management. In this paper, we detected the timing of irrigation and spatial distribution of paddy fields using the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor onboard the NASA EOS Aqua satellite. The timing of irrigation was detected by the combined use of MODIS-based vegetation index and Land Surface Water Index (LSWI). The detected timing of irrigation showed good agreement with field observations from two flux sites in Korea and Japan. Based on the irrigation detection, a land cover map of paddy fields was generated with subsidiary information on seasonal patterns of MODIS enhanced vegetation index (EVI). When the MODISbased paddy field map was compared with a land cover map from the Ministry of Environment, Korea, it overestimated the regions with large paddies but underestimated those with small and fragmented paddies. Potential reasons for such spatial discrepancies may be attributed to coarse pixel resolution (500 m) of MODIS images, uncertainty in parameterization of threshold values for discarding forest and water pixels, and the application of LSWI threshold value developed for paddy fields in China. Nevertheless, this study showed that an improved utilization of seasonal patterns of MODIS vegetation and water-related indices could be applied in water resource management and enhanced estimation of evapotranspiration from paddy fields.

• Radiation Oncology Journal
• /
• v.14 no.2
• /
• pp.167-173
• /
• 1996

Purpose : This analysis was to evaluate the radiation dose around a tracheostoma and spinal cord in the case of advanced laryngeal cancers in which a total laryngectomy was done before radiotherapy. Materials and Methods : The radiation dose around a tracheostoma and spinal cord was measured by thermoluminescence and film dosimetry in the phantom, Radiotherapy treatment planning was done in 12 cases of advanced laryngeal cancer and compared with the measured dose in the phantom. Results : Mean spinal cord doses in the phantom by thermoluminescence dosimetry were $86.4\%$ (with a tracheostoma), $80.1\%$ (without a tracheostoma), and the difference was $6.3\%$. Mean spinal cord doses in the phantom by film dosimetry were $84.7\%$ (with a tracheostoma), $79.0\%$ (without a tracheostoma). and the difference were $5.7\%$. Calculated spinal cord doses in the phantom were $84.0\%$ (with a tracheostoma), $78.0\%$ (without a tracheostoma), and the difference was $6.0\%$. Mean calculated spinal cord doses in 12 patients were $83.1\%$ (with a tracheostoma), $76.9\%$ (without a tracheostoma). and the difference was $6.2\%$. Measured dose of lateral and posterior wall of the tracheostoma by film was low (depth of maximum dose = 12 mm). Conclusion : In the treatment planning of the advanced laryngeal cancers, the radiation dose of the tracheostoma and spinal cord should be evaluated and be followed by an appropriate management such as a bouls or a brachytherapy boost if the dose around the tracheostoma is low.

• Journal of Korean Home Economics Education Association
• /
• v.32 no.2
• /
• pp.77-97
• /
• 2020

The purpose of this study was to develop and evaluate the sustainable housing teaching-learning process plan aimed to achieve the global SDGs through home economics class in middle school that is based on the ADDIE model. The overall objective of the plan was to contribute to cultivating students' sustainable housing values and to creating sustainable lifestyle through everyday practice. The plan consisting of 4 lessons contained various activity and visual resources(4 individual and 4 team activity sheets, 4 reading texts, 1 homework sheet and 1 evaluation sheet, and 7 videos) for students and (4 sets of ppt and 4 reading texts) for teachers. The theme and team activities of each lesson were related to 2~7 targets of 2~3 SDGs, in total 11 targets of 5 SDGs. The plan was implemented to 4 classes of 127 senior students at Y middle school in Cheongju city during the period from the 29^th of August to the 18^th of September, 2019. The results showed that students were very positive and highly satisfied with not only practical contents but also adequacy of resources and activities of the whole 4-lessons, so that they actively participated in the lessons more than usual and looked forward to learning more about it. They thoroughly enjoyed various team activities such as brain writing, mandal art, visual thinking, making UCC, and planning the sustainable village as well as writing a short reflective journal at the end of each lesson. Students also reported that they highly accomplished the goal of each lesson and the overall objective. It could be concluded that the teaching-learning process plan of 4-lessons could contribute to cultivating students' sustainable housing values and to creating sustainable lifestyle through practicing everyday life. It indicates that home economics is one of the major subjects to contribute to the attainment of global issue of SDGs for OECD education 2030 and to educate the practically acting global citizen.

• Journal of The Korean Association For Science Education
• /
• v.22 no.4
• /
• pp.779-795
• /
• 2002

Internet, a world wide network of computers, is considered as a sea of information because it allows people to share information beyond the barriors of time and space. However, in spite of the unmeasurable potential applications of the internet, its use in the field of biology education has been extremely limited mainly due to the scarcity of good biology-related sites. In order to provide useful guidelines for constructing user-friendly study sites, which can help high school students with different intellectual levels to study biology, comparative studies were performed on selected educational sites. Initially, hundreds of related sites were examined, and, subsequently, four distinct sites were selected not only because they are well organized, but also because each is unique in its contents. Also, a survey was carried out against the users of each site. The survey results indicated that the high school students regard the web-based biology study tools as effective teaching methods although there might be some bias in criteria for selecting target sites. In addition to the detailed biology topics and the related biology informations, multimedia data including pictures, animations and movies are found to be one of the important ingredients for desirable biology study sites. Thus, the inclusion of multimedia components should also be considered when developing a systematic biology study site. Overall, the role of the cyber space is expected to become more and more important. Since the development of the user-satisfied and self-guided sites require interdisciplinary collaborational efforts which should be made to promote extensive communication among teachers, education professionals, and computer engineers. Furthermore, the introduction of good biology study sites to the students by their teachers is also important factor for the successful web-based education.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.60-68
• /
• 2009

This work proposes a 10b 200MS/s 65nm CMOS ADC for high-definition video systems such as HDTV requiring high resolution and fast operating speed simultaneously. The proposed ADC employs a four-step pipeline architecture to minimize power consumption and chip area. The input SHA based on four capacitors reduces the output signal range from $1.4V_{p-p}$ to $1.0V_{p-p}$ considering high input signal levels at a low supply voltage of 1.2V. The proposed three-stage amplifiers in the input SHA and MDAC1 overcome the low output resistance problem as commonly observed in a 65nm CMOS process. The proposed multipath frequency-compensation technique enables the conventional RNMC based three-stage amplifiers to achieve a stable operation at a high sampling rate of 200MS/s. The conventional switched-bias power-reduction technique in the sub-ranging flash ADCs further reduces power consumption while the reference generator integrated on chip with optional off-chip reference voltages allows versatile system a locations. The prototype ADC in a 65nm CMOS technology demonstrates a measured DNL and INL within 0.19LSB and 0.61LSB, respectively. The ADC shows a maximum SNDR of 54.BdB and 52.4dB and a maximum SFDR of 72.9dB and 64.8dB at 150MS/S and 200MS/s, respectively. The proposed ADC occupies an active die area of $0.76mm^2$ and consumes 75.6mW at a 1.2V supply voltage.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.619-626
• /
• 2020

This study aimed to identify the error rates in Catheter Calibration Mode, Auto Calibration Mode, and Segment Calibration Mode among many calibration modes as a quantitative evaluation tool used for predicting the diameter and length of balloon or stent in percutaneous intravascular balloon dilatation or stent insertion. Our experiment was conducted with Copper Wire of 2 mm × 80 mm (diameter × length) manufactured elaborately for quantitative evaluation in calibration and Metal Ball of 5, 10, 15, 30, and 40 mm and Acryl Phantom of 25 mm, 50 mm, 75mm, 100 mm, 125 mm, 150mm, 175 mm, and 200 mm. At each height, subtraction images were acquired with a cineangiograph and Stenosis Analysis Tool as a software provided by the equipment company was used for measurement. To evaluate the error rates in Catheter Calibration Mode, Copper Wire was put on each acryl phantom before shooting. Copper Wire of 2 mm in diameter was set as a diameter for catheter, and Copper Wire of 8 mm in length was measured with Multi-segments. As a result, the error rates appeared at 1.13 ~ 5.63%. To evaluate the error rates in Auto Calibration Mode, the height of acryl was entered at each height of acryl phantom and the length of 8 mm Copper Wire was measured with Multi-segments and as a result, the error rates appeared at 0 ~ 0.26%. To evaluate the error rates in Segment Calibration Mode, each metal ball on the floor of table was calibrated and the length of 8 mm Copper Wire on each acryl phantom was measured and the length of 8 mm Copper Wire depending on the changes of acryl phantom height was measured with Mutli-segments and as a result, the error rates appeared at 1.05 ~ 19.04%. And in the experiment on OID changes in Auto Calibration Mode, the height of acryl phantom was fixed at 100mm and OID only changed within the range of 450 mm ~ 600 mm and as a result, the error rates appeared at 0.13 ~ 0.38%. In conclusion, it was found that entering the height values in Auto Calibration Mode, among these Calibration Modes for evaluating quantitative vascular dimensions provided by the software was the calibration method with the least error rates and it is thus considered that for calibration using a metal ball or other objects, putting them in the same height as that of treatment sites before calibrating is the method that can reduce the error rates the most.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.93-101
• /
• 2010

This paper aims to analyze success factors for the construction of Supdari(a traditional wooden bridge to connect small streams temporarily), which is a citizens' initiative project to revitalize local community in Jeonju-River, Jeonju City. Recently Supdari has been restored for the use of belongings in local festivals. But Jeonju-River Supdari was designed and built to unite local citizens and connect river-divided villages. This project shows how investing social capital like Supdari makes the community vitalize through citizen's active participation. As a citizen leading project, there were several critical factors for sucess. At first, there were some noticeable ways to encourage local citizen's participation in online and offline. In the online, the Supdari internet cafe introduced what is a Supdari, how to make it and where we build using various media of UCCs and photos. In the offline, the small scaled model of Supdari was made and exhibited in the entrance of the village and related several seminars were hosted to discuss how to construct Supdari with citizens, local assembly men and public officials together. The Second is the movement to restore traditional and cultural resources for the community recovery triggered the supports from local councils and many civic groups. Civic groups supported ecological and structural expertise to guarantee environment friendly and stable construction. And local councils mediated citizen's and administrative office's opinions. The third is flexible administrative management to help citizen's ideas to be realized. Officials extended setting period of Supdari on the condition with the civic-control safety management.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.13-19
• /
• 2006

Purpose: To evaluate whether modified MUPIT applicator can effectively eradicate recurrent tumor in uterine cervix cancer and reduce rectal complication after complete radiation treatment. Materials and Methods: Modified MUPIT applicator basically consists of an acrylic cylinder with flexible brain applicator, an acrylic template with a predrilled array of holes that serve as guides for interstitial needles and interstitial needles. CT scan was peformed to determine tumor volume and the position of interstitial needles. Modified MUPIT applicator was applied to patient in operation room and the accuracy for position of interstitial needles in tumor volume was confirmed by CTscan. Brachytherapy was delivered using modified MUPIT applicator and RALS(192-lr HDR) after calculated computer planning by orthogonal film. The daily dose was 600cGy and the total dose was delivered 3,000 cGy in tumor volume by BID. Rectal dose was measured by TLD at 5 points so that evaluated the risk of rectal complication. Results: The application of modified MUPIT applicator improved dramatically dose distributions in tumor volume and follow-up of 3 month for this patient was clinically partial response without normal tissue complication, Rectal dose was measured 34.1 cGy, 57.1 cGy, 103.8 cGy, 162.7 cGy, 165.7 cGy at each points, especially the rectal dose including previous EBRT and ICR was 34.1 cGy, 57.1 cGy. Conclusion: Patients with locally recurrent tumor in uterine cervix cancel treated with modified MUPIT applicator can expect reasonable rates of local control. The advantages of the system are the fixed geometry provided by the template and cylinders. and improved dose distributions in irregular tumor volume without rectal complication.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.19-24
• /
• 2010

The aim of this study was to evaluate the change of bone mineral density according to distal radius rotation and the correlations of the lowest BMD measured by DXA at the lumba versus distal radius. The eleven males were projected distal radius by DR X-ray and the measurement of BMD by DXA of the appropriate position of the forearm were performed on 21 males. The healthy 11 and 21 volunteers without any history of operations, anomalies, or trauma were enrolled. The experiment was performed by two methods. First, The DR X-ray was measured distal radius of 11 males in pronation and supination with three, six and nine degrees, including a neutral position. The ROI was measured by the m-view program on the PACS monitor. Second, The DXA was measured distal radius of 21 males in pronation and supination with five and ten degrees, including a neutral position to evaluate the changes of BMD according to the rotation. A correlation of the BMD in the distal radius with BMD that lumbar spine was performed, along with analysis of the data by SPSS 12.0v. The mean rotation angle of the distal radius about eleven males DR X-ray measured $7^{\circ}$ of pronation (82%, n = 9), $6^{\circ}$ of supination and $0^{\circ}$ of neutral of (9%, n = 1), The total average rotation angle in 11 male was $5.1^{\circ}$ of pronation. The rotation angle of the distal radius about twenty one males on DXA measured $7.2^{\circ}$ of pronation (43%, n = 9), $7^{\circ}$ of supination (24%, n = 5), and $0^{\circ}$ of neutral (33%, n = 7), The total average rotation angle in 21 people was $4.1^{\circ}$ of pronation. The correlation of the analysis of lumba and distal radius were r = 3.0, p = 0.18. consequently, The correlation was not significance. Because BMD of lumba was not coverd for BMD of the distal radius, with a neutral position, Pronation is needed for BMD in the distal radius with the rotation angle measuring at the lowest BMD. the rotation angle about five degrees of pronation of the distal radius is recommended.