• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.33-37
• /
• 2006

An equal-molar mixture of silver chloride (AgCl) and copper (Cu) was ground in atmosphere conditions using a planetary ball mill to investigate mechanochemical (MC) reaction for preparation of silver powders. The reaction causes the mixture of AgCl and Cu to change the composition of the mixture, such as silver (Ag) and cuprous chloride (CuCl). Through the leaching with ammonium hydroxide solution (1 mol), CuCl can be separated from MC product, so that pure Ag powders can be obtained as the final product. Moreover, polyvinylpyrrolidone (PVP) was used as the additive not only to improve dispersion of Ag pow- der during MC process, but also to control surface oxidation of Ag powders, prepared as the final product.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.1
• /
• pp.33-39
• /
• 2022

Batch experiments were conducted to find out the effects of various types of magnesium compounds on phosphorus recovery by magnesium ammonium phosphate (MAP) crystallization. The phosphorus recovery from the centrate of anaerobic digested sludge was performed using magnesium chloride, magnesium hydroxide and magnesium oxide under different pH (7.5, 8.0 and 8.5) and Mg/P molar ratio (1.0, 1.5, 2.0, 2.5) conditions. The phosphorus recovery rate increased with increasing pH and Mg/P molar ratio in all magnesium compounds. At pH 7.5, magnesium oxide showed the highest phosphorus recovery rate, followed by magnesium hydroxide and magnesium chloride. However, at pH 8.5, more than 90% of phosphorus recovery rate was obtained in all Mg/p molar ratios. Thus, it is expected that magnesium hydroxide and magnesium oxide are able to replace magnesium chloride as a magnesium source in terms of phosphorus recovery efficiency and cost.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.185-192
• /
• 1976

Equivalent conductances of ammonium salts such as $NH_4Cl,\;CH_3NH_3Cl,\;(CH_3)_2NH_2Cl,\;(CH_3)_3NHCl\;and\;(CH_3)_4NCl$ have been measured in methanol-water mixtures of various composition (0.0${\sim}$0.6-mole frcation: m. f.) in the concentration range from 0.01 to 0.04 M at $25^{\circ}C$, and limiting equivalent conductances (${\Lambda}_0$) are determined by the analysis of Fuoss Onsager's semiempirical equation.The experimental results are discussed in terms of varing the size of ${\Lambda}_0$ due to the salts species and solvent composition. It has been observed in quite common over all salts that ${\Lambda}_0$ decreases with the increase of m. f. methanol, and the maximum decrement in ${\Lambda}_0$ shows between water and 0.1 m. f., while the plot of ${\Lambda}_0$ vs. m. f. goes through a minimum at 0.4 m. f. and then turns slightly upward. On the other hand, the ${\Lambda}_0$ decrease with the increase of the size of ammonium cation and the larger values ${\Lambda}_0$ are showed in comparison with those of values observed for the corresponding $n-RNH_3Cl$ under the same experimental procedure. All these behaviors are considered to be closely correlated with the structures of solvents and solutes and the significant similarities are compared with the behaviors of partial molar volumes for amine salts in same solvent system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.486-486
• /
• 2011

금속산화물을 제조하는 방법으로 수열반응은 wire, rod, needle, lamella, flower등 다양한 형상을 화학적으로 합성하는데 널리 이용된다. 또한 금속산화물의 특성은 구조와 형상에 의존하고, 구조와 형상에 따라 촉매, 기능성 첨가제, 초전도체등에 다양한 분야로 사용되어진다. 본 연구는 수열방법으로 각 물질의 염화물과 암모니아수를 출발물질로 사용하였고, ionization 제어를 위해 염화암모늄을 사용하여 각 물질의 전구체를 합성하였다. 형성된 각 물질의 전구체는 열분해를 통해 산화물로 제조하였다. 이들 입자의 형상 및 특성을 확인하기 위해 SEM, XRD, FT-IR, Raman을 사용하여 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.147-147
• /
• 2010

Ferroxyl Test는 박막의 치밀도를 측정하는 대표적인 방법이다. 본 연구에서는 Ferroxyl Test를 이용하여 박막의 치밀도를 정량적으로 측정할 수 있는 방법을 제안한다. 알루미늄(aluminum; Al)은 뛰어난 내부식성 때문에 모재의 부식을 막을 수 있는 보호막으로 널리 사용되고 있다. Al 박막의 치밀도를 측정하기 위해서 스퍼터링(sputtering)으로 철(Fe) 기판위에 Al 타겟(99.99%)을 이용하여 박막을 코팅하였다. Ferroxyl Test 용액은 순수(deionized water)에 Potassium Ferrocyanide와 황산(또는 염화나타륨과 염화암모늄)을 첨가하여 제작하며, 용액에 거름종이를 적셔 Al이 코팅된 철 시편위에 올려놓고 반응시킨다. 일반적인 Ferroxyl test는 거름종이에 나타난 파란색(prussian blue) 반점의 숫자와 면적으로 치밀도를 측정한다. 하지만 이러한 방법은 측정 오차가 발생할 수 있다. 본 연구에서는 시편에 나타난 반응 반점의 면적을 광학 현미경이나 전자 현미경으로 이미지화하고, 이미지 프로세싱 프로그램을 이용하여 반응 면적을 수치화함으로써 측정오차를 줄이고 정확도를 높이고자 한다. 이러한 측정 방법을 이용하여 알루미늄 박막의 치밀도를 측정한 결과, 최고의 치밀도를 갖는 Al 박막이 Bulk 밀도의 94% 이상으로 측정되었다.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.22-27
• /
• 2004

Purification on the leaching solution of the crude zinc oxide obtained by the reduction of EAF dust has been carried out. Pb and Cd ions in the leaching solution were precipitated and removed from the solution by the addition of zinc metal powder. The purification condition for electrowinning to obtain the high purity zinc metal was investigated by analyzing the effects of Pb and Cd ion concentrations on the contents of impurities in the recovered zinc metal. The 3 N purity zinc metal was obtained at the electrolysis condition of the concentrations of Pb less than 2 ppm and Cd less than 0.1 ppm in the purified solution. For this purification, the amounts of zinc metal powder more than 8.5 g/l should be added in the crude zinc oxide leached solution.

• Analytical Science and Technology
• /
• v.18 no.5
• /
• pp.376-380
• /
• 2005

Quantitative analysis of silver from the thermal decomposition of chlorinated polymer contained nano silver is described. The chlorine contained in the chlorinated polymer (e.g. PVC) is liberated as hydrochloric acid gas by heating and a lot of silver produces AgCl. $HNO_3$ and $NH_4OH$ were used for dissolving the Ag and the AgCl. The silver complex was formed by $NH_4OH$. Then the complex was decomposed to silver by heating at $500^{\circ}C$ and the Ag was dissolved by dilute $HNO_3$. Recovery of silver in PVC material was 99.0%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.1
• /
• pp.9-13
• /
• 1986

An experiment on strawberry (Fragaria Grandflora EHRH) was conducted in order to compare the effect of two compound fertilizers made for this crop, by Kyonggi Chemical Crop. LTD. with that of muriate of potash, sulfate of potash and ammonium nitrate in a farmer's vinylhouse during the winter period of 1984 to 1985. Results obtained are as follows; 1. The effect of compound fertilizers on the growth, number of inflorescences and yield of strawberry showed no significant difference from the effect of muriate of potash, sulfate of potash and ammonium nitrate. But the former increased the content of reduced, and total sugars soluble in diluted acid in the juice of strawberry. 2. As a whole, sulfate of potash increased sugar content in strawberry juice more than muriate of potash, which became the reason to increase the sugar content in the strawberry juice harvested from the compound fertilizer plots.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.301-305
• /
• 2013

This study aims to design a portable desalination device and discusses the feasibility of the device for overcoming a shortage of safe drinking water. A low-energy, self-supporting, and portable desalination device is designed based on forward osmosis (FO) using an ammonium bicarbonate solution. Experiments with various concentrations of ammonium bicarbonate solution and sodium chloride solution showed that the portable desalination device's performance such as volume and flow rate of desalting water and time required satisfied drinking water standards. The device performance is controlled by varying the concentration and temperature of the solution.

• Journal of the Korean Chemical Society
• /
• v.19 no.4
• /
• pp.225-232
• /
• 1975

The elution behaviour of molybdate and tungstate through anion exchange column has been studied at the various pH. A discussion is made to evaluate the equilibrium constants of the polymerization of these acids comparing with the behaviour of chromate ion and dichromate ion. The eqailibrium constants found at $20^{\circ}$ are $K = 4{\times}10^{53} for 7MoO_4^{2-} + 8H^+ {\longleftrightarrow} Mo7O_{24}^{6- }+ 4H_2O$$ K = 3{\times}10^{54} for 6WO_4^{2-} + 7H^+ {\longleftrightarrow} HW6O_{21}^{5-} + 7H_2O$ referring to this results the conditions of separation of tungstate and molybdate are obtained. iThe quantitative separations of carbonate, molybdate and tungstate from the pregnant solution have been established by anion exchange chromatography, using the $22 cm{\times}44.27 cm^2$ column of Rexyn 201. The optimum eluents for the quantitative separation of those ions are as follows; 0.2M solution of sodium chloride at pH 8 for carbonate, the mixture of 0.5 M ammonium chloride and 0.05 M sodium sulfate at pH 5 for molybdate and 0.5 M solution of ammonium chloride at pH 10 for tungstate. Tungstate is directly recovered from the pregnant solution as a form of ammonium paratungstate, by eluting with ammonium chloride solution.