• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.919-924
• /
• 1996

사염화우라늄을 제조하기 위한 가장 효율적인 반응계는 이산화우라늄, 염소가스와 탄소분말이다. 여러 가지 실험변수 가운데 이산화우라늄의 염소화반응에 사용된 염소가스 주입량과 탄소의 양이 사염화우라늄 제조에 미치는 영향에 관하여 연구하였다. 각각의 실험변수들에 대한 전화율과 휘발률 계산을 통해 효율적인 반응을 위한 적정 염소가스 주입량과 탄소의 양을 구하였고, 이산화우라늄의 증가함에 따라 직접접촉에 의한 기체-고체반응에서는 전화율과 휘발률은 증가했으나 이후 과량을 첨가함에 따라 감소하였고, 용융염내의 기체-액체반응에서는 전화율의 미미한 증가와 휘발률의 감소를 확인하였가. 염소주입량이 증가함에 따라 전화율과 휘발률이 증가했으며, 과량의 염소가수 주입시 고이온가 염화물의 생성량이 증가하였다.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.453-463
• /
• 1996

The chlorination of reagent PbS and natural ore galena with $NH_4Cl$ was investigated to find a new extraction metallurgical process of lead. The proper conditions for the chlorination of galena were that reaction temperature ; $425^{\circ}C$, $NH_4Cl$ weight ratio to galena ; 4.0 and reaction time ; 2hrs. Under these conditions, PbS was successfully chlorinated to $PbCl_2$ and the conversion was 90%. And also $NH_4Cl$ was effectively decomposed and was separated $NH_3$ and HCl. HCl was a chlorinating agent and 90% of $NH_3$ was recovered through this chlorination reaction.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.179-189
• /
• 2005

Corrosion of steel due to chloride attack is a major concern in reinforced concrete structures which are located in the marine environments. In this case, Fick's 2nd law has been used for the prediction of chloride diffusion related with service life of concrete structures. However, those studies were confined mostly to the single deterioration due to chloride only, although actual environment is rather of combined type. The purpose of the present study is, therefore, to explore the influences of carbonation to chloride attack in concrete structures and to investigate the validity of Fick's law to chloride attack combined carbonation. The test results indicate that the chloride ion profiles from Fick's law using the diffusion coefficient of immersion tests is not reflected the effect of separation of chloride ions in carbonation region but valid in sound region in case of combined action. On the other hand, the chloride ion profiles from Fick's law using the diffusion coefficient of Tang and Nilsson's method coincide with test results under dry-wet condition but not under combined condition. The results of present study may Imply that the new method for the measurement of diffusion coefficient is required to predict the chloride ion profiles in case of combined action at early.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.3
• /
• pp.211-218
• /
• 2015

The reaction rates of ZIRLO cladding hulls with cross-section openings were investigated using a thermo-gravimetric analysis system in order to identify whether selective recovery of Zr from oxidized cladding hulls is possible. The experimental results showed that an oxidized ZIRLO cladding hull was not reactive with chlorine gas at 400℃. However, providing fresh cross-sections on one or both ends of the ZIRLO hulls enabled a chlorination reaction. This reaction was completed after 8 hours; a 14% increase on the 7 hours seen with a bare ZIRLO cladding hull. The Sharp-Hancock plot analysis results revealed that the contracting volume model is the best for describing the reaction between the cross-section opened ZIRLO hulls and chlorine gas under the condition of this work. It was concluded that the chlorination process can be employed for oxidized ZIRLO cladding hulls by providing cross-section openings.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.451-463
• /
• 1992

A selective chlorination of titaniferrous magnetite in a fluidized bed reactor was investigated to find the optimum condition for selective removal of Fe component from low grade titaniferrours magnetite ore and to produce a rutile substitute from titaniferrous magnetite ore. The optimum chlorination condition was determined to be a temperaure of $950^{\circ}C$, 2hr of reaction time, reducting agent(petroleum coke) to titaniferrous magnetite weight ratio of 0.12, and $Cl_2$ gas velocity of 5cm/sec. Under the above mentioned condition, 99% of Fe in titaniferrous magnetite was removed and the reaction residue which became rutile substitute was identified as rutile by x-ray diffraction and was found to contain 70% $TiO_2$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.115-119
• /
• 2005

As the regulations on DBPs are tightened, many water treatment plants (WTPs) in Korea have already introduced or will introduce enhanced coagulation, alternative disinfectants and advanced treatments such as ozonization and granular activated carbon to improve drinking water qualify. After a phenol leakage accident at the Nakdong-River in 1991, 26 WIPs in Korea introduced carbon dioxide generators, but there has been no accumulation of significant operating data. This research summarizes things that should be considered for the introduction of carbon dioxide disinfection process to WTPs based on one year operation data from A WTP that has had high concentration of DBP during a specific period in the summer. The removal efficiency of DBP was $30{\sim}40%$, but those of 2-MIB, Geosmin were less than 10%. The generation rate of $ClO_2$ by-products such as chlorite and chlorate were $70{\sim}100%$ of input dosage, but the ratios increased over time. At the same time, strong chlorine odors may be produced in the distribution system when $ClO_2$ was used with $Cl_2$ as a result of reaction between the chlorite and residual chlorine.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.591-600
• /
• 1993

Chlorination of tungsten from scheelite ore in a fluidized bed reactor has been investigated to develope tungsten extractive metallurgical process by the chlorination. All of the results in this experiment showed tungsten component could be sucessively chlorinated in a fluidized bed reactor. The proper conditions are as follows; reaction temperature $900^{\circ}C$, reaction time : 20min, $Cl_2$ gas velocity : 3.2cm/sec and petroleum coke-to-scheelite ore weight ratio : 0.2. Also the mean diameters of scheelite and petroleum coke were $150.5{{\mu}m}$ and $750.9{{\mu}m}$ respectively. Under these conditions, over 95% of tungsten component in scheelite was chlorinated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.259-260
• /
• 2009

Many concrete structures have suffered from carbonation or chloride ion diffusion induced reinforcement corrosion, and a number of studies have been done on these topics. Many studies were mostly confined to the single deterioration of carbonation or chloride ion, although the environment actually presents a combined condition. This paper tried to develop the approach to compute re-diffusion of de-sorbed chloride due to carbonation of concrete. This is a key for successful combined deterioration model of carbonation and chloride. It is thought that this paper can contribute to express mathematically chloride enrichment and re-diffusion of chloride at front of carbonation.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.278-288
• /
• 1974

Starting from p-dichlorobenzene, 2-amino-4-chloroanisole could be prepared via a nitration, a methoxylation, and subsequent reduction. The repeated chlorination of 2-amino-4-chloroanisole resulted 2-amino-3,4,5-trichloroanisole without any isomeric products. The chlorination of 4-chloro-2-nitroanisole could easily give 2,4-dichloro-6-nitroanisole but polychlorination of the product could not be achieved at the atmospherical pressure. The repeated chlorination of 2-amino-4,6-dichloroanisole could give 2-amino-3,4,5,6-tetrachloroanisole, The Schiemann reaction of 2-amino-4-chloroanisole and 2-amino-4,6-dichloroanisole could give 2-fluoro-4-chloroanisole and 2-fluoro-4,6-dichloroanisole, respectively. The repeated chlorination of these fluorochloroanisoles could give 2-fluoro-3,4,5,6-tetrachloroanisole. In each chlorination process, the components of products were examined by means of NMR spectrometry and the chlorination reaction was repeated without isolating each isomeric product. The feasibility of the present routes of preparations was discussed in respects to the conveniency of reaction conditions and respective overall yields of the processes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.5
• /
• pp.133-142
• /
• 2008

This paper studies the early-aged chloride binding capacity of various blended concretes including OPC(ordinary Portland cement), PFA(pulversied fly ash), GGBFS(ground granulated blast furnace slag) and SF(silica fume) cement paste. Cement pastes with 0.4 of a free water/binder ratio were cast with chloride admixed in mixing water, which ranged from 0.1 to 3.0% by weight of cement and different replacement ratios for the PFA, GGBFS and SF were used. The content of chloride in each paste was measured using water extraction method after 7 days curing. It was found that the chloride binding capacity strongly depends on binder type, replacement ratio and total chloride content. An increase in total chloride results in a decrease in the chloride binding, because of the restriction of the binding capacity of cement matrix. For the pastes containing maximum level of PFA(30%) and GGBFS(60%) replacement in this study, the chloride binding capacity was lower than those of OPC paste, and an increase in SF resulted in decreased chloride binding, which are ascribed to a latent hydration of pozzolanic materials and a fall in the pH of the pore solution, respectively. The chloride binding capacity at 7 days shows that the order of the resistance to chloride-induced corrosion is 30%PFA > 10%SF > 60%GGBFS > OPC, when chlorides are internally intruded in concrete. In addition, it is found that the binding behaviour of all binders are well described by both the Langmuir and Freundlich isotherms.