• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.115-119
• /
• 2005

As the regulations on DBPs are tightened, many water treatment plants (WTPs) in Korea have already introduced or will introduce enhanced coagulation, alternative disinfectants and advanced treatments such as ozonization and granular activated carbon to improve drinking water qualify. After a phenol leakage accident at the Nakdong-River in 1991, 26 WIPs in Korea introduced carbon dioxide generators, but there has been no accumulation of significant operating data. This research summarizes things that should be considered for the introduction of carbon dioxide disinfection process to WTPs based on one year operation data from A WTP that has had high concentration of DBP during a specific period in the summer. The removal efficiency of DBP was $30{\sim}40%$, but those of 2-MIB, Geosmin were less than 10%. The generation rate of $ClO_2$ by-products such as chlorite and chlorate were $70{\sim}100%$ of input dosage, but the ratios increased over time. At the same time, strong chlorine odors may be produced in the distribution system when $ClO_2$ was used with $Cl_2$ as a result of reaction between the chlorite and residual chlorine.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.827-833
• /
• 2017

This study was investigated the effects of various commercial sanitizers on microbial characteristics in fresh-cut iceberg lettuce during storage. For screening sanitizer, lettuce was cut and dipped in chlorine water ($0.2ml{\cdot}L^{-1}$), solution of organic acids such as ascorbic acid, citric acid, acetic acid, mixture of ascorbic acid and acetic acid (1-6%), and solutions of commercial sanitizers such as Formula 4$^{TM}$ (1,3,4%), Fresh produce wash$^{TM}$ (1,3,4%), Cleancol$^{TM}$ (1%), Chitochol$^{TM}$ (1%) and Natural Ca$^{TM}$ (0.1%) for 3 min, respectively. Washing lettuce with selected sanitizers resulted in reduction of aerobic bacteria of more than 2 log CFU/g. Initial pH of lettuce was related with the pH of sanitizers. pH ranged from 4.7 to 6.1 in Formula 4 (4%, pH 1.7) and Natural Ca (0.1%, pH 12.0), respectively. Chlorine water showed consistent and significant inhibition effect in all of microorganisms except total coliform. Over 3% of Formula 4 and Fresh produce wash were found to have high bactericidal activity among sanitizers. The sanitizers of chlorine water, Fresh produce wash, Chitochol and Natural Ca were effective in reducing yeast and mould populations. As coliform and E. coli, Formula 4 (4%) showed the highest bactericidal activity. The bactericidal effect of commercial sanitizers during storage varied with the kinds and concentrations of tested sanitizers. Although inhibition effect was not showed during storage, these results suggest that commercial sanitizers could be an alternative to chlorine for washing fresh-cut produce.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.11-17
• /
• 2017

Many problems are occurred by using industrial by-product and municipal solid waste in the cement manufacturing process. The main components of chlorine by-pass dust generated by the use of the wastes are $K^+$, $Cl^-$, and a slight amount of heavy metals is also contained. In terms of waste recycling, it is necessary to eliminate the heavy metals. Therefore, in this study, the experiments for the removal of heavy metals from KCl which was produced by chlorine by-pass dust were conducted. In order to find optimum conditions for the removal of heavy metals, we have controlled the amount of water and precipitator. The type and concentration of heavy metals in KCl were analyzed. The concentration of heavy metals decreased as amount of precipitator increased. The heavy metals such as Pb, Cd, and As were not detected in dust A and B, when the mixing ratios between dust A(B) and water were controlled to be 1:2 (1:2, 1:3.5) with the addition of 3% precipitator (NaOCl).

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.627-634
• /
• 2009

This study was done to find out the formation mechanism of chlorate by electrochemical process using chloride ion ($Cl^-$) as an electrolyte. Firstly, the effective factors such as pH and initial chloride concentration were figured out to see the formation property of chlorate during electrolysis. And the relation of free chlorine, and mixed oxidants such as OH radical and ozone with chlorate were estimated to concretize the formation mechanism. As a result, it was found that the major reaction of chlorate formation would be electrochemical reaction with free chlorine, and also the direct oxidation of chloride ion and the reaction by OH radical were participated in the formation of chlorate. Moreover, it was observed that formed chlorate was oxidized to perchlorate. Lastly, the optimum condition was recommended by comparing free chlorine with chlorate concentration during the electrochemical process with the different electrode separation.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1996.12a
• /
• pp.75-75
• /
• 1996

최근 가장 관심이 집중되고 있는 음용수중의 미량오염물질로는 인위적으로 첨가되는 소독제(disi octant)로 인한 소독부산물(disinfection by-products: DBPs)을 들 수 있다. 1970년대부터 염소소독시 수중의 유기오염물길과 반응하여 발암성물질 과 돌연변이 물질이 다수 함유되어 있는 클로로포름(chloform)을 포함한 트리할로메탄(Trih리omethane: THMs)의 생성이 발견되었으며 이로 인한 건강상의 영향이 지속적으로 보고되고 있다. 염소소독시 780가지 이상의 화합물이 염소와 휴믹산(humic acids)과의 반응에 의해 생성되며, 이중 대부분이 할로겐 화합물로 알려져 있다. 염소 소독부산물로는 인체발암력을 지니고 있는 트리할로메탄(THMs) 이외에도 할로아세틱산(Haloaceticacids: HAAs), 할로아세토나이트릴(Haloacetbnitriles: HANs)등이 주 생성물질인 것으로 알려져 있으나 우러나라의 원수특성에 따른 소독부산물의 생성능 (Formation potential)에 대한 연구가 미흡한 실정이다. 본 연구에서는 우리나라 주요 4대강(한강, 대청호, 영산강, 낙동강)의 원수를 실험실내에서 염소처리하여 생성되는 소독부산물의 생성농과 pH, 체류시간 등의 조건에 따라 생성능을 조사하였다. 각 화합물은 추출 및 농축과정을 거친 후 GC/MSD를 사용하여 물질을 확인한 후 할로겐화합물에 민감한 GC/ECD를 사용하여 시료를 분석하였다. pH와 시간, 원수중의 유기물 함량이 소독부산물의 생성에 많은 영향을 미치는 것으로 나타났다. THMs은 알칼리에서, HAAs의 경우는 약산성에서 접촉시간이 증가할수록 높은 생성능을 보였고, HANs의 경우는 급속히 생성했다가 시간이 경과함에 따라 소멸하며 약산성에서 높은 생성능을 보임을 알 수 있었다, 강별로는 낙동강에서 THMs파 HANs의 생성능이 비교적 높았고, 영산강에서는 HAAs의 생성능이 높았다. 각 원수의 특성에 따른 생성능을 파악함으로써 생성능 저감방안을 마련하며, 소독 부산물질의 인체노출평가에 따른 위해성평가를 통해 관리기준을 설정해야 할 것이다.

• Environmental engineer
• /
• s.179
• /
• pp.72-76
• /
• 2001

본 연구의 목적은 기존 혼합도금폐수 처리공정의 문제점(현재 도금폐수처리시 사용되고 있는 알칼리 염소법은 작업장내의 기기 부식, 작업환경 열악, 배출수 내의 활성염소 잔류 및 폐수처리 공정의 적정화 미흡)을 해결하고 폐수처리 공정에서 유해 물질을 즉시 분석할 수 있는 정량제를 국산화하여 국내의 도금폐수 처리공장에 보급하는 것이다. 개발한 기술은 기존 도금폐수 처리공정에서 사용하고 있는 과다한 차아염소산소다 사용법을 대체한 기술로 처리공정의 적용법이 간단하

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.09a
• /
• pp.5-38
• /
• 1996

최근에 산업발전, 유독물의 사용 증가에 따라 이들이 하천, 호소 및 지하수에 유입하여 수질오염이 심화되고 있다. 또, 하수, 산업폐수, 분뇨, 축산폐수 및 농경지 유하수가 하천 및 지하수에 침입하여 수원을 오염시키고 질소, 인분이 증가하여 호소 저수지에 부영양화를 유발하고 있다. 일반적으로 정수과정은 취수, 침사, 응집, 침전, 여과, 염소 소독의 재래식 정수 방법이고 특수하게 원수의 오염이 심할 때에 활성탄(입상)을 사용하거나 이산화염소를 보조제로 사용하는 정수장이 있고, 여과도 완속여과지를 사용하고 있는 예가 있으며 또 오염이 심한 정수장에서는 전염소처리를 적용하는 예가 있다.

• The Korean Journal of Mycology
• /
• v.41 no.4
• /
• pp.274-279
• /
• 2013

Slightly acidic hypochlorous water (SAHW) is well known for having a powerful and broad spectrum antimicrobial activity, and is harmless to the environment and humans. SAHW (pH 5~6.5, 20~30 ppm available chlorine concentration) was generated by electrolysis of dilute solution of HCl (4%) in a chamber of a non-membrane electrolytic cell. Our objective was to determine SAHW has a potential fungicidal activity on some phytopathogenic fungi. Spores of Botrytis cinerea, Colletotrichum acutatum and Phytophthora capsici were not culturable on agar media at approximately 10 seconds after treatment by SAHW. However, inactivation of Penicillium hirsutum was required over 3 min. Dilution of SAHW with sterilized distilled water (SDW) at the ratio of 1:1 (SAHW:SDW) against C. acutatum showed 100% inactivation but, the efficacy in 1:2 decreased until 63.2%. Control value of SAHW was 70.4% against C. acutatum on pepper fruits when applied upto 24 h postinoculation. SAHW has a powerful and wide spectrum antifungal activity and could be applied as a potential alternative to fungicidal agent for control of plant disease.

• Analytical Science and Technology
• /
• v.17 no.1
• /
• pp.69-81
• /
• 2004

The formation pattern of DBPs (disinfection by-products) in raw water treated with hypochlorite, chlorine disinfectant was studied. TOC (total organic carbon), residual chlorine, turbidity and 14 DBPs in raw water from Han-river and Nakdong river during 1 ~ 14 days were determined. Total DBPs in Han river was 101.3 ng/mL (789.6 nM) after 7days and THMs (trihalomethanes) are the dominant portion of 68%. HAAs (haloacetic acids) and chloral hydrate were determined 19% and 10% respectively. In Nakdong river total DBPs was 98.4 ng/mL (678.6 nM) and dominant class was HAAs. (55.8 ng/mL, 57%) THMs(34%) and N-compounds like HANs (haloacetonitriles, 5%) and chloropicrin were increased. It may be explained that high concentration of NH4-N in Nakdong river react with chlorine produced chloramine and this formed different pattern of DBPs. As a result, total DBPs formation pattern depends on raw water and disinfectant and in generally the initial concentration of acidic HAAs was high and THMs was increased gradually.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.30-30
• /
• 2018

스마트 도금공장을 구축하기 위해서는 도금액 내부의 화학 물질 농도 변화를 측정할 수 있는 화학 센서 기술이 필수적으로 요구된다. 와트욕은 대표적인 고속 니켈 도금액 중 하나로 기본적으로 황산니켈, 염화니켈, 보릭산의 염과 함께 케리어(type-1 광택제), 광택제(type 2-광택제), 응력 제어제 등의 유기 첨가제로 구성되어 있다. 이러한 유기 첨가제는 전차된 니켈층의 두께 균일도, 조도, 미세 구조, 내부 응력 등 다양한 특성을 제어하며, 정밀한 농도 관리가 필수적으로 요구되나, 분석 기술의 부재로 인하여 지금까지도 대부분의 액관리는 할셀법이나 작업자의 경험에 의존하고 있다. Cyclic voltammetry stripping(CVS) 방법은 전기화학 분석 과정에서 나타나는 첨가제의 가속, 감속 특성 등과 여기에 수반되는 stripping peak의 변화를 이용하여 개별 첨가제의 농도를 측정하는 방법이며, 지금까지 인쇄회로기판의 비아필 공정, 전해 동박 제조, 반도체 배선 등 구리도금 산업 전반에 걸쳐 첨가제 관리에 효과적으로 적용되고 있다. 그러나 수소 발생으로 인한 stripping 효율 문제로 인하여 니켈, 주석, 아연 등 표준 환원 전위가 높은 금속 도금액 내부 첨가제 농도 측정은 아직 어려운 상황이다. 본 연구에서는 이 문제를 극복하기 위해 염소를 과량 첨가한 구리 도금액을 CVS 분석의 base 용액으로 이용하여 니켈 도금액 내부 여러 광택제 (polyetylene glycol(PEG) 계열, thiourea 계열, 2-butyne-1,4-diol 등) 농도를 측정하는 법을 제시하였다. 제시된 방법은 CVS 분석 과정에서 구리-염소 사이의 상호 작용으로 인해 생성되는 3가지 stripping peak의 상대적인 크기 변화가 첨가제 농도에 따라 영향을 받는다는 사실에 기반하였다. 본 연구에서는 여기에 관한 원인에 대해 고찰하였으며, 제시된 방법을 통해 광택제 계열 첨가제 농도 측정을 선택적으로 할 수 있다는 것을 증명하였다.