• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.151-155
• /
• 2005

The effect of acid-base treatments of carbon blacks (CBs) was investigated in the mechanical properties of CBs/rubber composites. The surface characteristics of the CBs were determined by the pH, acid-base values, and surface energetics. Their mechanical properties of the composites were also evaluated by the crosslink density $(V_e)$ and tearing energy (T). As an experimental result, acidically treated CBs led to the increase of the specific component $({\gamma}s^{sp})$, resulting in decreasing the mechanical properties of the composites. However, basically treated CBs showed a higher value of the dispersive component $({\gamma}s^L)$ than that of the untreated or acidically treated CBs. It was also found that the interaction of the CBs-rubber was improved, resulting in the improvement of the crosslink density and mechanical properties of the composites. It was then remarked that the acid-base characteristics of the CB surfaces made an important role in improving the physical properties of the rubber matrix composites.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2439-2443
• /
• 2011

To obtain the effect of texturing process in Solar cells, the Si-wafers were textured by using the IPA+DI water mixed etching solution with KOH alkaline. All samples were analyzed by the scanning electron microscopy for the surface images, and it was researched the correlation between the efficiency of optical properties and the effect of texturing. From the results of the surface images obtained by SEM, mc-Si wafer shows a isotropic surface but sc-Si wafers displays the unisotropic surface. The reflectance was improved at the sc-Si wafer textured uniformly, and the reflectance of over etched-samples increased.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.176-184
• /
• 1984

Retention behavior of benzoic acid and its derivatives on XAD-2 in the alcoholic aqueous solution was investigated and separation was attempted. Retention was affected by the concentration and kinds of added organic solvents, the pH of the aqueous solution, the added $R_4N^+$ and the position and kinds of functional group in the sample molecules. Retention of sample acids in acidic conditions was due to mainly molecular adsorption on nonpolar XAD-2 surface and that in basic conditions was due to mainly ion-pair model. In these bases a mixed sample was separated in EtOH 20% aqueous solution at pH 8.50.

• Elastomers and Composites
• /
• v.35 no.2
• /
• pp.98-105
• /
• 2000

Using FT-IR and contact angle measurements it is observed that the chemical surface treatments on virgin carbon blacks lead to a change of the surface properties, including surface functionality and surface free energy It is found that the developments of surface functional groups on acidically and basically treated (ACB and BCB in this study, respectively) carbon blacks are largely correlated with the specific component of surface free energy of the carbon blacks. However, a significant advantage of compounding composites is gained by BCB or NCB (nonpolar chemical treatment) specimens, resulting in improving the hardness, elongation at break, and tensile strength. Particularly, it is seen that the tensile strength of the composites are greatly depended on the London dispersive component of surface free energy determined from the contact angle measurements. It is then concluded that the London dispersion component of carbon blacks plays an important role in an organic rubbers-based compounding composite system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.78-83
• /
• 1998

Alloy 600과 Alloy 690의 응력부식파괴(Stress corrosion cracking, SCC)에 미치는 TiO$_2$의 영향을 315$^{\circ}C$의 10%NaOH 수용액에서 RUB(reverse U-bend) 시편, C-Ring 시편과 CT(compact tension)시편을 사용하여 평가하였다. 시편은 alloy 600 MA(mill anneal), alloy 600 TT(thermal treatment) 그리고 alloy 690 TT로 제작하였다. SCC 시험은 탈산된 10%NaOH 수용액에 2 g/1 TiO$_2$를 첨가한 용액과 첨가하지 않은 용액에서 수행하였으며, 이 조건에서 분극곡선도 얻었다. SCC 시험시 시편을 부식전위로부터 +150 ㎷ 양극분극을 가하였다. 기준전극으로 external Ag/AgCl electrode를 사용하였다. Alloy 600 MA로 제작한 RUB 시편은 TiO$_2$가 없는 용액에서 5일 안에 벽 관통 균열을 보였으나 TiO$_2$가 첨가된 용액에서는 균열을 관찰할 수 없었다. TiO$_2$가 첨가됨에 따라 alloy 600과 alloy 690의 임계전류밀도는 크게 감소하였고 또한 부동태 전류밀도도 감소하였다. 부동테 영역에서 TiO$_2$가 있는 용액의 경우 여러 peak가 있는 반면에 TiO$_2$가 없는 용액은 peak가 뚜렷하지 않았다. 이런 결과는 TiO$_2$가 첨가점에 따라 active region에서도 안정한 부동태 피막이 존재한다는 것을 시사한다. 또한 TiO$_2$가 없는 경우 SCC가 잘 일어나는 영역에 존재하는 부동태 피막이 TiO$_2$ 첨가에 따라 repassivation kinetics 등의 성질이 변화한 것으로 판단된다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.8-11
• /
• 1996

전기투석은 역삼투압, 한외여과와 함께 가장 많이 이용되고 막공정 중의 하나이다. 전기투석은 다른 막공정과 같이 막의 선택성에 의한 분리조작이며 병렬식 배열에 의한 막의 이용이 가능하고 막오염 현상이 있으며 따라서 막-유체간의 접촉에 대한 제어가 필요하다. 전기투석은 운전목적에 따라 desalting electrodialysis(ED)와 water-splitting electrodiaiysis(WSED)로 구분할 수 있다. Desalting electrodialysis는 고전적 의미의 탈염을 위한 전기투석공정이며 WSED는 bipolar membrane을 이용하여 염을 산과 염기로 분리시키는 기능을 갖는 전기투석 공정을 말한다. WSED는 전기적으로 물을 분리한다는 의미로서 Electrohydrolysis로 불리기도 한다. WSED의 기본원리는 bipolar membrane의 양쪽면에서 수소이옹과 수산이온을 발생시켜 산 또는 염기용액으로 전달하고 bipolar membrane에 접하고 있는 양이온 또는 음이온 교환막에서는 각 용액의 전기적 중성을 유지하기 위해 대응하는 이온을 투과시키는 것이다. WSED는 염으로부터 산 염기제조 뿐만아니라 염의 형태로 생성되는 유기산, 아미노산 등 발효생성물의 회수 또는 acidification에 이용되고 있다.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.103-107
• /
• 2020

The purpose of this study is to resource calcium ions contained in most industrial by-products, and confirm the characteristics of calcium ions by extraction and separation conditions. Calcium oxide was used as a calcium extraction source, and hydrochloric acid as an extraction solvent, and the extraction amount according to the concentration of the extraction solvent and the pH dependent characteristics of the extract were analyzed. As the extractant concentration increased, the extracted amount increased while the pH for the extraction was kept constant. In order to separate extracted calcium ions, an acid-basic solution was injected and the formation of precipitates and also the form of precipitates were analyzed. When the sulfuric acid and sodium hydroxide solution of acid and basic substances were injected into the calcium extract, precipitates were formed and separated into CaSO₄ and Ca(OH)₂ forms.

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.393-400
• /
• 2004

Nitrosation of phenol (POH) was studied by adding hydrochloric acid and sodium nitrite to phenol solution with reaction temperature and time change. The optimum condition of nitrosation was found from the effects of hydrochloric acid and sodium nitrite concentration, reaction temperature, and reaction time changes on the production of nitrosophenol (POHNO). As a result, it was found that the optimum conditions were $5.0{\times}10^{-4}{\sim}2.0{\times}10^{-3}M$ range of $NO{_2}^-$ concentration, more than 0.10 M of HCl concentration, temperature of $80^{\circ}C$, and 3 hrs. of reaction time. In this condition, 10 U.S. E.P.A. classified priority environmental pollutant, phenols, were nitrosated. Nitrosated phenols were: POH, 2-Chlorophenol (2ClPOH), 2,4-diChlorophenol (2ClPOH), 2,4-dimethylphenol (24diMPOH), and 4-Chloro -3-methylphenol (4Cl3MPOH), and a small part of 2-nitrophenol (2NPOH). The ${\lambda}_{max}$ values of nitrosated phenols in acidic solution were around 300 nm, and those in basic solution were around 400 nm. Molar absorptivities (${\varepsilon}$) at the 400 nm of the nitrosated phenols in the basic solution were 1.5~2.0 times larger than those at 300 nm in acidic solution. It was also found by Capillary-HPLC chromatograms of the nitrosated phenol solutions that the production of the nitrosophenols were interfered by the excess concentration of nitrite (more than $3.0{\times}10^{-3}M$).

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.265-270
• /
• 1994

The aquation and base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ were studied by UV spectroscopic method in various SDS aqueous solution. The base hydrolysis of [Co(en)$_2$NH$_3$Cl]$^{2+}$ with the addition of 0, 0.05, 0.1 mol dm$^{-3}$ sodium chloride was studied. For the aquation of the complex, the rate constant in the micellar phase(kH$^M$) was a little larger than that in the aqueous phase(kH$^W$). With the increase of SDS concentration, the second order rate constant(kOH) for the base hydrolysis unchanged below the CMC and sharply decreased down to a limiting value after the CMC was reached. The effect of added NaCl on the rate behavior of the complexes in the micellar solution were investigated by using an ion-exchanged model.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.10a
• /
• pp.235-236
• /
• 2010