• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.42-48
• /
• 1997

원자로 냉각재 계통의 주요 구성요소중의 하나인 증기발생기는 원자로의 정상운전 과정에서 발생되는 고온의 열에너지를 2차 측으로 전달하여 터빈을 구동하기 위한 증기를 생산하는 역할을 하게 된다. 동적하중으로부터 증기발생기를 보호하고, 정상운전시 고온 고압에 의해 발생하는 열팽창을 흡수하기 위하여 유압식 스너버를 이용하여 증기발생기를 지지한다. 본 연구에서는 증기발생기 스너버의 이동거리를 해석하기 위한 링크장치의 기하학적 계통을 모델링하여 제시하고, 스너버의 이동거리 해석에 영향을 미치는 인자를 추출하여 검토하였다. 또한 스너버의 강성값 결정 과정에서 요구되는 레버기구의 하중분담율을 해석할 수 있는 방법을 개발하였다. 해석 결과의 타당성을 검토하기 위하여 현재 건설중인 1000Mwe급 표준 가압형 경수로 발전소의 고온 성능시험과정에서 실측한 결과와 비교 검토하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.75-79
• /
• 2013

Demands for semiconductor devices are dramatically increasing, and advancements in fabrication technology are allowing a step-up in the number of devices per unit area. As a result, semiconductor devices require higher heat dissipation, and thus, cooling solutions have become important for guaranteeing their operational reliability. In particular, in chip-in-board packages, in which chips and passives are embedded in the substrates for efficient device layout, heat dissipation is of greater importance. In this study, a thermal model for layers of different materials has been proposed, and then, the heat transfer has been simulated by imposing a set of appropriate boundary conditions. Heat generation can be predicted based on the results, which will be utilized as practical data for actual package design.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.952-964
• /
• 1992

The interaction of natural convection and radiation heat transfer in a two dimensional square enclosure containing absorbing, emitting and linear anisotropically scattering gray medium is numerically analyzed. P-1 and P-3 approximation is introduced to calculate radiation heat transfer. The effects of scattering albedo, wall emissivity, scattering anisotropy, and optical thickness on the characteristics of the flow and temperature field and heat transfer are investigated. Temperature and velocity profiles depend a great deal on the scattering albedo, and the importance of this effect increases with decrease in albelo. Planck number is another important parameter in radiation heat transfer. The increase in scattering albedo increases convection heat transfer and decreases radiation heat transfer at hot wall. However, the increase in scattering albedo decreases both convection and radiation heat transfer at cold wall. The increase in optical thickness decreases radiation heat transfer. The scattering anisotropy has important effects on the radiation heat transfer only. The highly forward scattering leads to an increase of radiation heat transfer whereas the highly backward scattering leads to an decrease of radiation heat transfer. The effect of scattering anisotropy decreases when reducing the wall emissivity.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.61-61
• /
• 2021

온도 성층화는 많은 저수지와 댐에서 흔히 발생하는 현상으로 호수나 저수지의 표면 온도가 바닥보다 상대적으로 높아 깊이에 따른 열 구배를 나타낸다. 이러한 온도 성층화 현상은 여름철과 같이 상부와 하부의 온도 차가 클수록 안정적이게 나타나며 이러한 층화 현상으로 수직 확산이 제어되어 수질에 영향을 미친다고 알려져 있다. 따라서 댐이나 호수 등 층화 현상이 심한 유체 내부 바닥에 물순환장치를 설치하여 외부로부터 공기를 끌어와 하부에서 공기를 분출하여 온도 성층을 약화시키기도 한다. 물순환 장치를 설비하면 수체의 혼합이 용이해지며 물질전달이 개선되어 수질이 향상된다. 국내의 경우 대청댐, 보령댐, 영주 댐 등 많은 국내 댐 내부에 물순환장치가 설비되어있다. 본 연구에서 댐의 물순환장치의 성능을 파악하기 위해 산기식 물순환 장비가 설치되어있는 영주댐을 연구 대상 지역으로 잡았다. 연구지역의 계절별 성층구조 및 특성을 조사하기 위해, 봄, 여름, 가을 영주댐에 방문하여 관측 자료를 취득하였으며 물순환 장치는 봄철의 경우만 가동하였다. 봄철의 물순환 장치 가동 전후 관측 데이터를 바탕으로 수치모형실험을 실행하여 관측 결과와 비교 및 검증하였다. 이를 바탕으로 여름, 가을에 물순환장치를 가동하였을 경우 댐 내부 수체의 혼합과정을 살펴보는 연구를 진행하였다. 본 연구는 CFD (Computational Fluid Dynamic) 시뮬레이션을 수행하기 위해 오픈 소스 소프트웨어 OpenFOAM(version 4.0)에서 열 전달이 포함되어있는 비압축성 VOF 솔버를 사용하였다. 본 솔버는 물과 공기를 동시에 나타낼 수 있으며 온도의 확산 방정식을 포함하고 있다. 또한 유동해석 수행 시 사용한 물순환장치의 효울은 실제 장치의 효율과 동일하다. 본 연구의 목표는 다음과 같다. (1) 관측만으로 파악하기 어려운 수체의 혼합거동을 유동해석 자료를 통해 면밀히 살펴보고 (2) 봄철 물순환 장치가 작동하기 전후 자료를 바탕으로 여름 및 가을철 물순환장치 가동 전후 데이터를 유동해석 자료로 취득한다. (3) 또한 물순환장치 가동 전후 데이터를 통해 계절별 혼합 효율을 취득한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.361-369
• /
• 2011

The effect of an increase in the temperature of inlet air on the performance of a membrane humidifier for a PEMFC (Polymer Electrolyte Membrane Fuel Cell) vehicle was investigated both experimentally and numerically. A shell-and-tube type gas-to-gas humidifier with Nafion membrane was tested. The experimental result showed that water transfer varies nonlinearly with the temperature elevation. Numerical analysis based on detailed modeling was also conducted in simplified geometry of a single tube to explain this nonlinear behavior. The simulation revealed that the local water flux varies nonlinearly and dramatically along the tube. The analysis was based on the inverse relationship between the increase in temperature and decrease in relative humidity, both of which seriously affect the water conductivity of the membrane.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.72-80
• /
• 2018

Combustion instabilities are caused by the feedback relationship between heat release perturbations and acoustic pressure oscillations in the combustor. Studies on the combustion instability in an annular combustor have recently received great attention due to the enhanced NOx requirement in aero-engines. In this study, a thermoacoustic network model was developed in order to calculate the acoustic characteristics for various modes in the annular combustor. The network model is combined with flame transfer function(FTF) in order to calculate the stability of the combustor. Numerical results are compared with measurement data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.896-904
• /
• 2017

Lean premixed combustion was successful in meeting current NOx emission regulations. However, these often leads to combustion instability. This phenomena results from the feedback relationship between heat release perturbations and acoustic pressure oscillations in the combustor. Researches on the combustion instability in an annular combustor have recently received great attention due to the enhanced NOx requirement in aero-engines. In this study, the thermoacoustic network model has been developed in order to calculate the acoustics for longitudinal as well as circumferential modes in the annular combustor. The combustion model in the network model is calculated by flame transfer function(FTF). Numerical and analytical results are compared to an measurement data.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.305-310
• /
• 2001

Within some degree of journal misalignment, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined under the condition of variable density and specific heat. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the effects of variable density and specific heat on shaft misalignment are significant in determining the load capacity of a journal bearing operating at high speed.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.287-292
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of journal bearing at high speed operation.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.1
• /
• pp.23-34
• /
• 2016

Concrete filled steel tube system has two major advantages. First, the confinement effect of steel tube improves the compressive strength of concrete. Second, the load capacity and deformation capacity of members are improved because concrete restrains local buckling of steel tube. It does, however, involve workability problem of using stud bolts or anchor bolts to provide composite effect for larger cross-sections. While the ribs inside the columns are desirable in terms of compressive behavior, they cause the deterioration in load capacity upon in-plane deformation resulting from thermal deformation. Since the ribs are directly connected with the concrete, the deformation of the ribs accelerates concrete cracking. Thus, it is required to improve the toughness of the concrete to resist the deformation of the ribs. Welding built-up tubular square columns can secure safety in terms of fire resistance if the problem are solved. This study focuses on mixing steel fiber in the concrete to improve the ductility and toughness of the columns. In order to evaluate fire resistance performance, loaded heating test was conducted with 8 specimens. The behavior and thermal deformation capacity of the specimens were analyzed for major variables including load ratio. The reliability of heat transfer and thermal stress analysis model was verified through the comparison of the results between the test and previous study.