• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.9-16
• /
• 2020

In this paper, we propose a prototype design and implementation of a fire detection algorithm using multiple sensors. The proposed topic detection system determines fire by applying rules based on data from multiple sensors. The fire takes about 3 to 5 minutes, which is the optimal time for fire detection. This means that timely identification of potential fires is important for fire management. However, current fire detection devices are very vulnerable to false alarms because they rely on a single sensor to detect smoke or heat. Recently, with the development of IoT technology, it is possible to integrate multiple sensors into a fire detector. In addition, the fire detector has been developed with a smart technology that can communicate with other objects and perform programmed tasks. The prototype was produced with a success rate of 90% and a false alarm rate of 10% based on 10 actual experiments.

• Journal of the Korea Society for Simulation
• /
• v.27 no.3
• /
• pp.45-52
• /
• 2018

We consider the busy period of an M/G/1/K queueing system with queue-length-dependent overload control policy. A variant of an oscillating control strategy that was recently analyzed by Choi and Kim (2016) is considered: two threshold values, $L_1({\leq_-}L_2)$ and $L_2({\leq_-}K)$, are assumed, and service rate and arrival rate are adjusted depending on the queue length to alleviate congestion. We investigate the busy period of an M/G/1/K queue with two overload control policies, and present the formulae to obtain the expected length of a busy period for each control policy. Based on the numerical examples, we conclude that the variability and expected value of the service time distribution have the most influence on the length of a busy period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.45-45
• /
• 2020

하천 횡단구조물 하류부에서는 고유속 및 ±압력에 의해 하상재료가 유실되는 세굴현상이 발생한다. 이러한 세굴을 방지하기 위해 횡단구조물 하류부에는 석재, 콘크리트 및 콘크리트 블록 등을 설치 및 포설하여 하상보호공을 설치한다. 하상보호공을 설치하면 설치된 부분은 세굴이 방지 되지만, 하상보호공 끝단 이후에는 지반이 노출되어 있어 노출된 지반에서 고유속 흐름 및 압력변화에 의한 세굴이 발생하는 경우가 많다. 이에 본 연구에서는 하상보호공 끝단 즉, 하상이 노출된 지반에서 압력변화에 따라 하상재료가 유실되므로 압력에너지를 감쇄시키기 위한 하상보호장치를 개발하였다. 개발한 하상보호장치는 본래 다수개가 열을 지어 메트릭스 형태로 설치되도록 하여야 하지만 실험 여건상 단일체로 수리실험을 진행하였다. 하상보호장치는 상판과 하판이 조립된 형태이며 상판과 하판 사이에 이격공간이 구비되어있다. 하상보호장치 검증을 위해 상판과 하판에 쓰이는 판은 수로재질과 같은 아크릴로 제작하였으며, 하상재료의 공극률을 반영하여 다공성 판으로 제작하였다. 다공판의 전체 구멍 면적 대비 판 면적은 35 % 로 동일하다. 상판 구멍 지름 15.0 mm, 4.5 mm 2가지로 제작하였으며, 하판 구멍 지름 3.0 mm 으로 동일하다. 압력변화가 큰 곳에서 작은 곳으로 물이 이동하게 되므로 고유속 수리조건에서 상판과 하판 사이에서의 압력변화를 측정하기 위해 판 중간에 압력계를 설치하였다. 하상보호장치 설치지점 앞 0.3 m 부근에 PIV를 설치하여 유속을 측정하였다. 실험결과 상판의 구멍 직경(15.0 mm)이 클 경우 상판부 압력이 하판부로 전달되어 하판에서 측정되는 압력이 증폭 되었으며, 상판의 다공성 구멍 직경(4.5 mm)이 작을 경우 상판부에서 하판부로 전달되는 압력이 감소하여 하판에서 측정되는 압력이 감소하였다. 상판과 하판의 다공성 구멍의 직경을 적절한 사이즈로 조절하면 상판부의 압력이 하판부로 전달되는 것을 막고 압력에 의해 하상에서 흡출되는 유사를 막을 수 있는 것으로 판단되며 추후 상판과 하판의 다공성판 구멍 직경의 상대적 차이에 따른 압력 감소효율에 관한 연구가 필요하다고 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1515-1519
• /
• 2006

본 연구에서는 초단시간 강수예보(VSRF, Very Short-Range Forecast of precipitation) 시스템 구축 현황을 소개하고자 한다. VSRF 모델은 레이더 반사도 자료와 지상 AWS 자료를 이용하여 레이더-AWS 강우강도를 산출하는 강수분석과정과 분석된 강수량 자료와 중규모 수치예보장을 사용하여 외삽법에 의한 초단시간 강수예보를 수행하는 예보과정, 실시간으로 산출된 강수예보 자료를 검증하고 홈페이지에 제공하는 자료지원과정으로 구성된다. 본 연구에서는 모델의 예보능력을 향상시키기 위해 크게 두 가지 측면에서 모델을 개선하였다. 첫째는 모델의 입력자료인 레이더-AWS 강우강도 자료를 기상연구소 원격탐사연구실에서 운영하던 WPMM (Window Probability Matching Method)과 기상청 기상레이더과에서 운영하던 RQPE(Radar Quantitative Precipitation Estimation)의 알고리즘을 통합하여 정확한 강우강도 자료인 레이더-AWS 강우강도(RAR, Radar-AWS Rain rate) 시스템을 구축하여 개선하였으며, 둘째는 외삽과정을 통한 예보가 3시간이 지나면 예측능력이 감소하는 문제점을 보완하기 위해 현업 중규모 모델(RDAPS, Regional Data Assimilation and Prediction System)의 예측강수와 병합하여 모델을 개선하였다. 또한 이를 시계열 검증 및 공간 검증하는 실시간 검증 시스템을 구축하여 실시간으로 모델의 정확성을 평가하고 있다. 그 결과 입력자료 개선을 통한 모델의 정확도는 크게 향상된 결과는 볼 수 없었지만 미약하게 향상된 것을 확인할 수 있었으며, 모델의 병합을 통한 모델의 개선은 예측 3시간 이후부터는 50% 정도 향상되었다.의 대안을 제시하고자 한다.X>${\mu}_{max,A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.357-372
• /
• 2001

In this paper, we present the concept of generalization in constructing windows for subsequence matching and propose a new subsequence matching method. GeneralMatch, based on the generalization. The earlier work of Faloutsos et al.(FRM in short) causes a lot of false alarms due to lack of the point-filtering effect. DualMatch, which has been proposed by the authors, improves performance significantly over FRM by exploiting the point filtering effect, but it has the problem of having a smaller maximum window size (half that FRM) given the minimum query length. GeneralMatch, an improvement of DualMatch, offers advantages of both methods: it can use large windows like FRM and, at the same time, can exploit the point-filtering effect like DualMatch. GeneralMatch divides data sequences into J-sliding windows (generalized sliding windows) and the query sequence into J-disjoint windows (generalized disjoint windows). We formally prove that our GeneralMatch is correct, i.e., it incurs no false dismissal. We also prove that, given the minimum query length, there is a maximum bound of the window size to guarantee correctness of GeneralMatch. We then propose a method of determining the value of J that minimizes the number of page accesses, Experimental results for real stock data show that, for low selectivities ($10^{-6}~10^{-4}$), GeneralMatch improves performance by 114% over DualMatch and by 998% iver FRM on the average; for high selectivities ($10^{-6}~10^{-4}$), by 46% over DualMatch and by 65% over FRM on the average.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.936-946
• /
• 2015

This study is aimed to analyze the reduction performance of building energy consumption according to planting base types of panel-type green walls which can be applied to existing buildings. The performance was compared to the general performance of green walls that have demonstrated effects of improving the thermal environment and reducing building energy consumption in urban areas. The number of planting base types was 4 in total, and simulations were conducted to analyze the thermal conductivity, thermal transmittance, and overall building energy consumption rate of each planting base type. The highest thermal conductivity by the planting base type was Case C (0.053W/mK), followed by Case B (0.1W/mK) and Case D (0.17W/mK). According to the results of energy simulation, the most significant reduction of cooling peak load per unit area was Case C (1.19%), followed by Case B (1.14%) and Case D (1.01%) when compared to Case A to which green wall was not applied; and the most significant reduction of heating peak load per unit area was estimated to be Case C (2.38%), followed by Case B (1.82%) and case D (1.50%) when compared to Case A. The amount of yearly cooling and heating energy use per unit area showed 3.04~3.22% of reduction rate. The amount of the 1st energy use showed 5,844 kWh/yr of decrease on average for other types when compared to Case A. The amount of yearly $CO_2$ emission showed 996kg of decrease on average when compared to Case A to which the green wall was not applied. According to the results of energy performance evaluation by planting location, the most efficient energy performance was eastward followed by westward, southward and northward. According to the results of energy performance evaluation by planting location by green wall ratio, it was found that as the ratio of green wall increased, the energy performance displayed better results, showing approx. double reduction rate in energy consumption at 100% of green wall ratio than the reduction rate at 20% to 80% of green wall ratio.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.639-647
• /
• 2022

The use of flames is essential in cutting, bending, and welding steel during a ship's construction process. While acetylene fuel is commonly used in steel cutting and the manufacturing process in shipyards, the use of propane as an alternative fuel has recently been increasing, due to the lower risk of explosion and propane's relatively low calorific value. However, propane fuel has a relatively slow processing speed and high slag generation frequency, thereby resulting in poor quality. Propylene is another alternative fuel, which has an excellent calorific value. It is expected to gain wider use because of its potential to improve the quality, productivity, and efficiency of steel processing. In this study, the combustion characteristics of propane and propylene fuel during steel plate processing were analyzed and compared. The reduction of greenhouse gases and other harmful gases when using propylene flame was experimentally verified by analyzing the gases emitted during the process. Heat distribution and tensile tests were also performed to investigate the effects of heat input, according to processing fuel used, on the mechanical strength of the marine steel. The results showed that when propylene was used, the temperature was more evenly distributed than when propane fuel was used. Moreover, the mechanical tests showed that when using propylene, there was no decrease in tensile strength, but the strain showed a tendency to decrease. Based on the study results, it is recommended that propylene be used in steel processing and the cutting process in actual shipyards in the future. Additionally, more analysis and supplementary research should be conducted on problems that may occur.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.300-309
• /
• 2001

The purpose of this study was to investigate the caries prevalence and caries pattern of preschool children in a small city. Six hundred twenty four kindergarten children in Milyang city were examined for their caries experience of individual teeth and surfaces by dmf index. The obtained results were as follows. 1. The rate of children with caries experience(dmft rate) in primary teeth was 74.0% in 3-year-olds, 83.8% in 4-year-olds, and 90.6% in 5-year-olds. The mean number of decayed, missed, and filled primary teeth(dmft index) was 3.47 in 3-year-olds, 5.41 in 4-year-olds, and 6.01 in 5-year-olds. 2. The caries prevalence of children in this study was higher than those of other researches in past and in other cities. 3. The caries-experienced teeth in order in 5-year-olds were as follows : mandibular 2nd primary molar, mandibular 1st primary molar, maxillary 2nd primary molar, maxillary primary central incisor and maxillary 1st primary molar. 4. The pattern of dental caries development was different between the incisors and molars. The prevalent surface of caries was proximal surface in primary incisors, but occlusal surface in primary molars.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.510-514
• /
• 2007

This study was carried on cool and RT(room temperature) storage of unhulled rice. In RT storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and breakdown, setback and protein content. high significant negative coefficients were showed setback and breakdown, breakdown and protein content. In cool storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and amylose content and gelatinization start temperature and protein content and high significant negative coefficients were showed toyo index and whiteness, toyo index and gelatinization start temperature, gelatinization start temperature and amylose content. In RT storage of a path coefficient analysis, a highest positive direct influence was observed in amylose content and a highest negative direct influence was protein content. Positive indirect influence was high revealed breakdown and protein content and negative indirect influence was gelatinization start temperature and Mg/K ratio. In cool storage of a path coefficient analysis, a highest positive direct influence was whiteness and a highest positive indirect influence was gelatinization start temperature. Positive indirect influence was high revealed gelatinization start temperature and amylose content, negative indirect influence was whiteness and gelatinization start temperature. In RT storage of Multiple regression equation of Toyo index based on physicochemical properties of unhulled rice, a highest coefficient of determination was revealed among five facters of whiteness, protein content, Mg/K ratio, amylose content and gelatinization start temperature. In cool storage of Multiple regression equation of toyo index based on physicochemical properties of unhulled rice, highest coefficient of determination was revealed among five facters of moisture content, amylose content, gelatinization start temperature, breakdown and setback.