• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.56-58
• /
• 2019

배터리의 효율적인 관리와 안정적인 운영을 위해서는 배터리의 노화에 따른 배터리의 모니터링이 필요하다. 하지만 모델 기반의 SOH 예측 모델의 경우 파라미터의 변화에 대한 정확한 정보가 반영되지 않을 경우 심각한 오류를 야기 할 수 있다. 따라서 본 논문에서는 비 모델인 시계열 예측 기법 ARIMA 모델을 제안하고 전기적 특성 실험을 통한 내부 파라미터에 대한 분석과 파라미터에 대한 상관분석, 이를 통한 SOH 예측을 통해 ARIMA 모델의 특성 및 정확성에 대해 제안한다.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.144-151
• /
• 2011

Intermittent CSR testing was used to investigate the degradation of a hydrogenated NBR(HNBR) O-rings, and also the prediction of its life-time. The cure system of HNBR O-ring was controlled as sulfur cure and peroxide cure system. An intermittent CSR jig was designed taking into consideration the O-ring's environment under use. The testing allowed observation of the effects of friction, heat loss, and stress relaxation by the Mullins effect. Degradation of O-rings by thermal aging was observed between 100 and $120^{\circ}C$. In the temperature range of $100-120^{\circ}C$, O-rings showed linear degradation behavior and satisfied the Arrhenius relationship. The activation energy of HNBR-S was about 70.6 kJ/mol. From Arrhenius plots, predicted life-times of HNBR-S O-ring were 31.1 years and 33.7 years for 50% and 40% failure conditions, respectively. In case of HNBR-P, the activation energy was about 72.1kJ/mol, and predicted life-times were 34.0 years and 36.5 years for 50% and 40% failure conditions, respectively. The peroxide cure system showed slower degradation rate and higher activation energy than the sulfur cure system.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.120-129
• /
• 2014

The structure and physiological function of human skin continuously weaken due to growing older. The reasons of aging from external conditions are long term exposure to sun, wind, heat, cigarette smoke, and etc. This also palmitoyl oligopeptide or ceramide oligopeptide are known asc ingredient stimulating collagens and have the effect of reproducing the upper level of skin. Acetyl hexapeptide is an ingredient that makes the skin and muscle suppler and reduces wrinkles. It is a major high function beauty ingredient that substitutes botox. After dividing 7%, 14%, and 20% Acetyl hexapeptide experimental groups as groups A, B, and C the control group and experiment groups' change of wrinkles, hair follicles, moisture content, and dead skin cells was analyzed. According to the results, Acetyl hexapeptide seems to affect wrinkles, hair follicles and moisture content contrasting to the control group. Experimental groups and control group showed similar change in dead skin cells. In contrast to the control group satisfaction of examines was affected in wrinkles, hair follicles and moisture but removing dead skin cells had similar result in experimental groups and control group.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.331-337
• /
• 1988

The thermal properties of typical five Indica and five Japonica rice varieties were investigated by Differential Scanning Calorimetry (DSC). There was no significant difference in gelatinization temperature between Indica and Japonica varieties, but the average enthalpy of gelatinization was larger in Indica types than that in Japonica. However, the enthalpy of melting of amylose-lipid complex was larger in Japonica types than that in Indica types. The DSC thermogram of hydrolyzed rice residue included a smaller peak of gelatinization with narrow range of temperature. Retrogradation of gelatinized rice kernel was also determined with DSC theremograms. The endothermic peak areas clearly increased with increasing storage time at $4^{\circ}C$ so that the area could be used as a measure of the relative degree of retrogradation. The results indicated that Samgang variety(Indica) retrograded more rapidly than Chuncheong variety(Japonica).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.101-107
• /
• 2020

In this paper, step-curing, which includes the change of curing temperature on the curing process, was applied to reduce curing day of HTPB/AP based propellant. This study targets the improvement of productivity of HTPB/AP based solid rocket motor. Comparison of mechanical properties of propellant resulted in the change of normal curing condition (60℃, 5 days) to step-curing condition (60℃, 1 day / 65℃, 3 days). Post-cure test was conducted to determine the impact on the shelf life of the solid rocket motor. The aging characteristics of propellants were analyzed by measuring mechanical properties and thermal expansion factor. To step-cured propellant, accelerated aging test was performed for 12 weeks, followed by tensile test. Sm(bar) and Em(%) were higher than 8 bar and 40% each, showing excellent mechanical properties.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.149-154
• /
• 2011

In order to explore properties of various rubber compounds after thermal aging under the condition similar to the operating environment of a fuel cell-stack, heat resistance and compression set of those compounds were investigated for a long term operation in $H_2SO_4$, $H_2O$, and LLC (ethylene glycol : $H_2O=50:50$) solution. It was assumed that aging Acrylonitrile butadiene rubber (NBR) and Elthylene Propylene diene rubber (EDPM) compound in the solution resulted in discoloration as time passed. It was also found that hydrolysis was developed on the Silicone rubber (VMQ) compound intentionally aged under acidic condition by means of TGA, SEM, and EDS analysis.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.15-21
• /
• 2018

Skin-aging is accelerated by the increased expression of MMP-1 caused by the increased skin temperature induced by IR/visible light as well as UV. Thus, the control of skin temperature is important to inhibit heat-induced aging. Many studies have been conducted to lower the skin temperature through the controlling transient receptor potential melastatin 8 channel (TRPM8), which is known as the cold and menthol receptor 1 (CMR1) and is activated at temperature below $25^{\circ}C$. In this study, we first investigated the effect of Ganoderma lucidum extract (GLE) on the TRPM8 expression. Results showed that GLE, hexane (Hex) fractions and water fractions increased the TRPM8 expression in a dose dependent manner. Active compound in Hex fractions were separated by chromatography and analyzed by $^1H$ and $^{13}C$ NMR spectroscopy. The isolated compounds were identified as ergosterol and it also significantly increased the TRPM8 expression. Taken together, these results strongly suggest that G. lucidum extract and ergosterol have the potential as a new cooling ingredient in the cosmetics.

• The Korean Journal of Malacology
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2014

This study is aimed at figuring out the reasons of the mass mortality of abalone and the increase in its mortality rate in the sea cage. The study suggests that lack seawater circulation in an abalone aquaculture cage is an important culprit for it. We analyzed the current distribution around a 1/20 scaled-down abalone unit cage of 4 rows and 10 columns by fluid flow visualization technique (PIV : Particle Image Velocimetry). The speed of current in the model cage definitely slowed down in the first column of a unit cage. We also observed currents going down to the bottom of a water tank from the unit cages placed in the middle. The speed of wakes behind inside the row in the middle was slower than that outside the row. Water velocity inside and outside a real abalone cage at Nowha Island adjacent to Wan Island was measured to verify results from the tank test. The speed of current in front of the cage by 2 m was 0.11 m/sec while it was only 0.0009 m/sec inside the cage. It had similar findings with those of a tank test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1416-1425
• /
• 2002

In this study, the effects of combined environmental factors on mechanical and thermal analysis properties of graphite/epoxy composites were evaluated by the use of an accelerated aging test. Environmental factors such as temperature, moisture. and ultraviolet were considered. A xenon-arc lamp was utilized for ultraviolet light. and exposure times of up to 3000 hours were applied. Several types of specimens - tensile. bending, and shear specimens those are transverse to the fiber direction, and bending specimens those are parallel to the tiber direction - were used to investigate the effects of environmental factors on mechanical properties of the composites. Also, glass transition temperature, storage shear modulus, loss shear modulus, and tan ${\delta}$ were measured as a function of exposure times through a dynamic mechanical analyzer. In addition. a suitable testing method for determining the effect of environmental factors on mechanical properties is suggested by comparing the results from using two different types of strain measuring sensors. Finally, composite surfaces exposed to environmental factors were examined using a scanning electron microscope.

• Journal of Power System Engineering
• /
• v.19 no.5
• /
• pp.93-98
• /
• 2015

Nuclear power plants has a number of valves, which are operating at a high temperature-high pressure and radiation environment conditions. Nevertheless, it is important to maintain the reliability of the valves to ensure safe operation of the nuclear power plant. However, the aging of the valves by increasing of years of plant operation and the system transients due to the sudden load change are working the failures of the reliability of the valve. In this paper, we evaluate experimentally the performance change according to the thermal aging of the valve. Results show that the valve stem and the actuator leakages were enlarged by the thermal aging.