• Journal of the Korea Society of Computer and Information
• /
• v.19 no.4
• /
• pp.81-90
• /
• 2014

As mobile devices have become widely used and developed, PC based malwares can be moving towards mobile-based units. In particular, mobile Botnet reuses powerful malicious behavior of PC-based Botnet or add new malicious techniques. Different from existing PC-based Botnet detection schemes, mobile Botnet detection schemes are generally host-based. It is because mobile Botnet has various attack vectors and it is difficult to inspect all the attack vector at the same time. In this paper, to overcome limitations of host-based scheme, we compare two network-based schemes which detect mobile Botnet by applying HMM and SVM techniques. Through the verification analysis under real Botnet attacks, we present detection rates and detection properties of two schemes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.449-452
• /
• 2009

In order to improve incombustibility of EPDM(Ethylene propylene diene monomer)-based rubber, inorganic materials as $Al(OH)_3$ and $Sb_2O_3$ were added. The mechanical and thermal properties have been measured for vulcanized rubber loaded with different concentrations of $Al(OH)_3$ and $Sb_2O_3$. As inorganic material contents increases from 5phr to 30phr, the specific gravity and hardness increase while elongation at break decreases. This study performed incombustibility test and thermal analysis through TGA(Thermogravimetric Analyzer). As a results, incombustible and thermal properties of EPDM-based rubber were improved as $Al(OH)_3$ and $Sb_2O_3$ contents increase.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.363-364
• /
• 2009

The activity and stability test of low-temperature(850 $\sim$ 1,000 ${^\circ}C$) firing MgO which is expected to improve the performance of the crack resistance wee conducted and The degree of hydration for the 10% MgO-mixed cement paste was analyzed after 1day, 3days, 7days, 28days, 56days, 90days, and 180days using SEM, XRD, DSC.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.95-104
• /
• 2009

Recently, increasing numbers of games and simulators are being implemented by employing the physically-based modeling techniques for better realism. In this paper, we propose the implementation techniques for overhead crane simulator based on ODE, the well-known open source dynamic engine. By comparing the dynamic behavior of the proposed system with a commercial engine based simulator, the physical plausibility and the effectiveness of the ODE based OHC simulator are verified. We expect the proposed the OHC simulator can be successfully utilized for virtual training in various educational institutes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.893-897
• /
• 2004

In this paper, we studied the mechanical and thermal properties on slice XLPE sheet from 22 kV and 154 kV power cables. Interface structures are XLPE/semiconductor and XLPE/water/semiconductor. We evaluated mechanical property, thermal analysis, moisture analysis. Based on mechanical and thermal properties of the 22 kV XLPE sheet, elongation, mechanical strength, and melting point were evaluated to be 485.48 %, 1.74 kgf/$\textrm{mm}^2$ and $102.48^{\circ}C$, respectively. It was also evaluated from the mechanical and thermal properties of 154 kV XLPE sheet that elongation, mechanical strength, and melting point are 507.81 %, 1.8 kgf/$\textrm{mm}^2$, $106.9^{\circ}C$, respectively. A region shows a rapid increase in tension strength, and B region only shows increase in elongation under 1.0 kgf/$\textrm{mm}^2$, C region shows increase in both elongation and tension strength. Difference of melting point came from the chain of XLPE polymer and the difference of crystallization. Moisture density of semiconductor showed 800 ∼ 1200 ppm before extrude, 14000 ∼24000 ppm after extrude. These values were higher than the moisture density of XLPE (300∼560) ppm.

• Fire Science and Engineering
• /
• v.12 no.2
• /
• pp.17-28
• /
• 1998

To propose a new fire hazard assessment criteria of interior finish materials, the properties and incident heat flux of interior finish materials in a compartment fires are investigated and compared by using flame spread model developed by Quintiere. The properties considered on which fire growth depend are including flame heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat flux and thermal inertia, lateral flame spread parameter, heat of combustion and effective heat of gasfication. ISO Room Corner Test(9705) is applied in the model and the time for total energy release rate to reach 1MW is examined. The results are compared for the 24 different materials tested by EUREFIC. Dimensionless parameter a, b and ${\gamma}$b are used to develope a new method in which fire hazard of interior finish materials can be classified resulting from correlation between b and flashover time. Results show that if b greater than about zero, flashover time in the ISO Room-Corner Test is principally proportional to ignition time only.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.138-138
• /
• 2018

선박을 통한 해상수송은 세계 무역의 80% 이상을 차지하고 있으며, 대부분의 선박은 저질중유의 연소로부터 추진력을 발생시키는 디젤 엔진을 원동력으로 사용하고 있다. 이러한 디젤 엔진은 연소의 부산물로 매년 백만 톤 이상의 오염물질을 방출하는데, 그 주성분은 탄소로 이루어져 있고 고온 열분해 또는 압축 점화 엔진의 작동 부산물들이 소량 포함되어 있다. 이에 본 연구에서는 선박으로부터 배출된 폐 수트를 리튬이온전지용 도전재로 활용하기 위한 독특한 방법이 제안되었다. 실험에 사용된 폐 수트는 운항중인 컨테이너선으로부터 수집되었으며, 수집된 폐 수트는 탄소 성분 이외의 불순물을 제거하고 흑연화 정도를 개선시키기 위해 $2,000^{\circ}C$로 열처리되었다. 열처리된 폐 수트의 모폴로지를 확인하기 위해 투과전자현미경을 이용하여 그 형상을 관찰하였으며, 이를 통해 폐 수트의 일차 입자는 지름이 약 70-100 nm 정도인 양파껍질 모양의 탄소(carbon nano-onion)로 형성된다는 것이 확인되었다. 또한, XRD, RAMAN 분광법 및 BET 분석 결과를 통해, 열처리된 폐 수트가 결정성이 있는 흑연으로 재형성되었으며 비표면적은 일반적으로 사용되는 활물질에 비해 약간 더 높다는 것을 확인할 수 있었다. 한편, 이러한 특성은 리튬이온전지용 도전재로 활용될 수 있는 가능성을 보여주었고, 이는 전기화학적 정전류 충전 및 방전 테스트를 통해 그 성능이 확인되었다. 일반적으로 사용되는 도전재의 테스트 결과와 폐 수트를 도전재로 사용한 테스트 결과를 Fig. 1에 나타내었다. 이상의 실험 결과들을 미루어 볼 때, 선박으로부터 배출된 폐 수트가 리튬전지용 음극 활물질 및 도전재로 재활용될 수 있을 것으로 사료된다.

• Journal of ILASS-Korea
• /
• v.10 no.2
• /
• pp.10-17
• /
• 2005

The proposed research has been performed to know the characteristics of cutting fluid aerosol formation using Dual-PDA system in machining process. The cutting fluid aerosol size and concentration is common attributes that quantify the environmental intrusiveness or air quality contamination. The atomized cutting fluid aerosols can be affected to human health risk such as lung cancer and skin irritations. Even though cutting fluid can be improved the machining quality and productivity in a carefully. its use must be controlled and optimized carefully. This experimental works using Dual-PDA were performed to analyze the cutting fluid aerosol behaviors and characteristics in turning process using precise aerosol particle measuring system. The obtained experimental results profovide basic knowledge to develop the environmentally conscious machining process. This results cail be provided as a basis to estimate and control the hazardous cutting fluid aerosol in machining process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.259-266
• /
• 1998

406MHz and INMARSAT-E EPIRB facility transmits the distress alerts by the relay of the polar-satellites and INTELSAT, but may cause the probability of delayed transmission because of the orbital period and not compliance with the implementation of GMDSS rules for small ships in A1 area.. Digital Selective Calling forms a critical part of the terrestrial elements of the GMDSS system and ensures the reliability and the efficiency in the system. In this paper, we suggests that new DSC EPIRB in the VHF band to overcome this defect for small ships in A1 area, and analyze the ITU-R recommendations and technical characteristics, design and implement the algorithm of calling sequences, frequency synthesizer for the RF signal and FSK moulation signals.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.91-101
• /
• 2021

This study attempted to conduct the study from a macro perspective more specifically through the temporal and spatial analysis of Minbuk villages according to a change in a Civilian Control Line, such as a social and spatial distribution and a change of the existing Minbuk villages. To this end, this study conducted the spatial analysis for the change in the Minbuk villages according to the adjustment of the Civilian Control Line in time series by using a map of the Armistice Agreement Vol. 2, Google Earth, a digital cadastral map, an administrative district map, and the like are used as spatial data, and summarizing and constructing, as attribute data, a statistical yearbook, Ministry of Defense and Cheorwon-Gun notification data, a Land Use Regulation Information System, and cadastral map attribute information. After the enactment of the Military Facility Protection Act, the analysis was performed on a 20-year basis based on the 1976 statistical yearbook of which the Civilian Control Line was drawn. As a result, the total area of the Civilian Control Zone in Cheorwon from 1975 to 2015 decreased by 105.8 km², and 9 of 14 Minbuk villages were released and only 6 villages existed. The unoccupied villages were analyzed as 14 villages, 10 fewer than the existing surveyed or statistical villages. The movement of the Civilian Control Line to the north may disappear the unique characteristics of the Minbuk villages but should be done carefully as it is closely related to the lives of the current residents, and policies should be established in terms of sustainable development and conservation of the villages. This study is significant in conducting the temporal and spatial analysis, which is the basis of the Minbuk regions and the Minbuk villages, and may be used as basic data necessary for subsequent analysis study.