• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.580-587
• /
• 1995

1979. 3.28 미국 TMI-2의 사고를 계기로 개발된 증상기준 비상운전절차서는 고리 3,4/영광 1,2호기의 경우 '92. 2에 개정된 ERG-18를 근거로 하여 각 발전소 운전담당 자들에 의하여 확인 및 검증 (Verification S Validation) 작업을 통하여 금년부터 본격적으로 적용되기에 이르렀다. 그러나 비상운전절차서의 특성상 리 발전소별 특정 설정치의 계산에서 어려움을 겪었으며 아직도 재확인 작업을 통한 최적화 여지가 상 당부분 잔존하고 있다. 여기어서는 고압발전소인 고리-3,4/영장-1,2호기 비상운전절차서에 있어서 증기발생기에 공급되는 정상 밋 비상급수의 전체 상실사고시 노심 노출 방지 및 노심 열 제거를 위해 적응되는 기능회복절차서의 "2차 열제거원 상실시 조치" 중 방출 및 충전 운전의 성공적 시작점을 계산, 개정된 비상운전절차서와 비교하여 특정 발전소의 방출 및 충전 운전 설정치를 제시하였고, 이러한 결과로부터 현재 보수적으로 설정된 값의 완화를 유도하여 방출 및 충전 운전 시작전, 운전원으로 하여금 급수확보를 시도할 수 있는 시간여유의 연장을 도출할 수 있었다.도출할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.119-121
• /
• 2003

열을 발생하는 부품에 있어서 효과적으로 열방출 향상시키는 것은 부품의 신뢰성을 위해 중요한 사항이며, LTCC와 같은 고밀도 회로기판을 설계하는데 있어서 필수적으로 고려할 사항이다. 본 연구에서는 열전달을 향상시키기 위한 구조를 설계하였다. 또한, 열전달 효과를 조사하기 위해서 LTCC 기판 내에 열 비아 및 패드를 위치시킨 기판을 제작하였다. Laser Flash Method를 통해 재료의 열전도도 분석을 수행 하였다. 열비아 및 열방출을 위한 패드로 구성된 LTCC 기판의 열전도 특성은 순수 Ag 재료의 44%인 103 W/mK 특성 값을 나타내었다.

• Solar Energy
• /
• v.18 no.3
• /
• pp.169-175
• /
• 1998

Metal hydrides can be used for the purpose of heat storage and transportation from the industrial complex which own recoverable waste heats to the neighboring cities by the medium of hydrogen. The properties of metal hydrides, some problems of heat transportation using metal hydrides, and the example of heat transportation system were discussed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.75-82
• /
• 2010

To study the combustion characteristics of forest fuel by fire intensity, the experiment of combustion characteristics on Pinus Densiflora living leaves, which is the weakest species to the forest fire, was delivered, using variables of heat flux(25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$). With the equipment of Cone calorimeter, the characteristics of ignition, heat, smoke release, CO and $CO_2$ release, and mass loss were analyzed. Pinus Densiflora living leaves containing moisture of 60.66% were not ignited at the heat flux of variables 25 kW/$m^2$, 50 kW/$m^2$, 75 kW/$m^2$. In proportion to the heat flux value, heat release amount and heat release rate reached maximum value rapidly: higher variables came to the maximum by the half rapidity and the maximum value were twice higher than the former lower variables respectively. As for the smoke release, the less heat flux the variable had, the more smoke release it had, due to incomplete combustion. The release amount of CO and $CO_2$ had more maximum value as the heat flux increased and more radiant heat meaned more carbon oxide. When the forest fire breaks out, therefore, a great amount of CO and $CO_2$ will be released by Pinus Densiflora.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.120-125
• /
• 2010

Wood-Plastic Composites (WPCs) are one of spotlighting materials for the residential construction and the industry for furniture. At this study, the limiting oxygen index (LOI) was measured by ASTM D 2863 and the cone calorimeter test was done by ISO 5660-1 to find the combustion characteristics of WPCs. In addition, the identical test was implemented to compare the combustion characteristics between the red pine and the antiseptic wood. The result of LOI measurement showed that the LOI of WPCs was lower than that of red pine or antiseptic wood. The cone calorimeter test showed that the heat release rate (HRR) of WPCs was the highest and the Peak HRR as well as the average HRR and total heat release of WPCs was higher than those of red pine or antiseptized wood

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.675-681
• /
• 2014

The purpose of this study is to analyze fundamental combustion characteristics of woods used for indoor applications. The combustion characteristics such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter or thermogravimetry. These analysis results show that material properties of wood are closely related to flammability. It was shown that the relationship between the mass loss and gas emission. The results of combustion properties of woods would be useful for fundamentals of guiding the safe use of wood indoor application.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.261-268
• /
• 2001

An investigation on nondestructive evaluation of thermal stress-nduced damage in the composite laminates (3mm in thickness and $[+45_6/-45_6]_s$ lay-up angles) has been performed using the thermo-acoustic emission technique. Reduction of thermo-AE events due to repetitive thermal load cycles showed a Kaiser effect. An analysis of the thermo-AE behavior determined the stress free temperature of composite laminates. Fiber fracture and matrix cracks were observed using the optical microscopy, scanning electron microscopy and ultrasonic C-sean. Short-Time Fourier Transform of thermo-AE signals offered the time-frequency characteristics which might classily the thermo-AE as three different types to estimate the damage processes of the composites.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.768-776
• /
• 2015

This study was performed to understand combustion properties four major Indonesian wood species such as Albizia, Gmelina, Mangium and Mindi were investigated by cone-calorimeter for better utilization of theses wood species. Heat release rate (HRR), total heat release (TSR), specific mass loss rate (SMLR), effective heat of combustion (EHC), time to ignition (TTI), flame time (FT), specific extinction area (SEA), smoke production rate (SPR) and CO compound production rate were measured. HRR, THR and FT were proportional to the density of woods. Albizia showed the highest HRR, while Mindi had the lowest HRR. For SPR, Albizia showed the highest value due to its higher SEA. On the other hand, Mindi had the lowest SPR due to a lower SEA value. The highest smoke emission was for Albizia at the beginning of combustion. After 300 seconds, smoke emission of Gmleina and Mangium was increased greatly. Mangium and Mindi showed the highest total carbon dioxide emission. Expecially, Gmelina released the highest carbon monoxide during the combustion period and presented three times higher $CO/CO_2$ ratio than those of other species due to incomplete combustion.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.1
• /
• pp.41-48
• /
• 1999

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3-5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic and endothermic reaction. After releasing hydrogen from metal hydride with heatings by waste heat from industry we can transport this hydrogen to the rural area via pipe line. In the urban areas other metal hydride reacts with this hydrogen and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. So metal hydride can be used as a media for transportation, storage of heat. Some problems of the heat transportation using metal hydrides, and the example of heat transportation system were discussed.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.460-465
• /
• 2000

원자력 발전소의 중대사고는 비록 발생 확률은 매우 낮지만 사고 발생시 결말 효과가 크기 때문에 TMI 사고나 체르노빌 사고 이후 이에 대한 연구는 활발하게 진행되고 있다. 방사성 물질이 일단 환경으로 방출된 이후에 인체 및 환경에 영향을 미치는 주요 변수로는 풍향, 풍속, 강수량, 대기안정도로 대표되는 기상 조건과 방사선원 및 방출 고도, 열 함량, 방출 시간 등과 같은 방사선원 방출 특성에 관한 여러 가지 많은 변수들을 고려하여야 한다.(중략)