Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Combustion Properties of Woods for Indoor Use (I)

실내사용 목재의 연소 특성 분석(I)

  • Son, Dong Won (Korea Forestry research Institute) ;
  • Kang, Seog-Goo (Department of Bio-Based Materials, College of Agriculture & Life Science Chungnam National University)
  • 손동원 (국립산림과학원 임산공학부) ;
  • 강석구 (충남대학교 환경소재공학과)
  • Received : 2014.04.29
  • Accepted : 2014.06.16
  • Published : 2014.11.25
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to analyze fundamental combustion characteristics of woods used for indoor applications. The combustion characteristics such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter or thermogravimetry. These analysis results show that material properties of wood are closely related to flammability. It was shown that the relationship between the mass loss and gas emission. The results of combustion properties of woods would be useful for fundamentals of guiding the safe use of wood indoor application.

최근 친환경 재료에 대한 국민들의 관심이 높아지면서 실내사용목재의 이용도 증가하고 있다. 본 연구는 실내사용 목재의 내화성 부여를 위한 기초자료로 활용될 수 있는 열특성 분석에 그 목적이 있다. 열방출률과 열방출량, 가스발생량, 중량감소 등의 연소성질을 열중량 분석(TGA) 및 콘칼로리미터(KS F ISO 5660-1)의 방법으로 분석하였다. 분석결과 목재의 재질적 특성은 연소적 특성으로 발현되었으며, 열적성질과 연소가스 발생량과의 관계는 상관관계가 높게 나타났다. 탄화층 형성에 의한 연소억제 효과도 수종에 따라 현저한 차이를 보였다. 총열방출량과 중량감소량은 상관관계가 높게 나타났다. 점화시간과 총열방출량 등의 자료는 목재의 내화성능부여 등의 기초 자료로서 매우 중요하리라 판단되었다.

Keywords

References

  1. Boonmee, N., Quintiere, J.G. 2002. Glowing the ignition and burning rate of wood. In: Twentyninth Symposium (international) on combustion, The Combustion Institute 29. pp: 289-296. https://doi.org/10.1016/S1540-7489(02)80039-6
  2. Cheong, Y.J. 2010. Combustion Properties of the Quercus variabilis and Zelkova serrata Dried at Room Temperature (II). Applied Chemistry for Engineering 21(4): 469-474.
  3. Choi, J.M. 2011. A Study on Combustion Characteristics of Fire Retardant Treated Pinus Desiflora and Pinus Koraiensis. Journal of The Korean Wood Science and Technology 39(3): 244-251. https://doi.org/10.5658/WOOD.2011.39.3.244
  4. KS F ISO 5660-1. Reaction to fire test - Heat release. smoke production and mass loss rate - Part 1: Heat release rate (Cone calorimeter method).
  5. Park, H.J., Kang, Y.G., Kim, H. 2005. Study on Combustion Characteristics of Fire Retardant Treated Wood. Journal of The Korean Wood Science and Technology 33(4): 38-44.
  6. Pearce, F.M., Khanna, Y.P., Raucher, D. 1981. Thermal Characterization of Polymeric Materials. Chap. 8, Academic Press, New York, U.S.A.
  7. Quintire, J.G. 1998. Principles of Fire Behavior. Chap. 5. Cengage Learning, Delmar, USA.
  8. Shin, B.W., Song, Y.H., Rie, D.H., Chung, K.S. 2010. A study on Combustion Characteristics of Wood-Plastic Composites. Korean Institute of Fire Science & Engineering 24(6): 7-12.
  9. Spearpoint, M.J. 1999. Predicting the ignition and buring rate of wood in the cone calorimeter using an intergral model. 30, NIST GCR 99-775, U.S.A.
  10. Stevens, M.G., Voruganti, V., Rose, R. 1995. "Correlation of Small Scale Fire Tests to ASTM E 84 Tunnel Performance for Thermoset Resin System", Proc. Fire and Material, International Conference, Interscience Communication Ltd, London. Vol 4.
  11. Yang, H., Yan, R., Chem, H.D., Lee, H., Zheng, C. 2007. Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86: 1781-1788. https://doi.org/10.1016/j.fuel.2006.12.013

Cited by

  1. Combustion Properties of Woods for Indoor Use (II) vol.43, pp.4, 2015, https://doi.org/10.5658/WOOD.2015.43.4.478
  2. Combustion Properties of Major Wood Species Planted in Indonesia vol.43, pp.6, 2015, https://doi.org/10.5658/WOOD.2015.43.6.768
  3. Combustion Characteristics of Useful Imported Woods vol.44, pp.1, 2016, https://doi.org/10.5658/WOOD.2016.44.1.19
  4. Combustion Characteristics of Fire Retardants Treated Wood (I) vol.43, pp.1, 2015, https://doi.org/10.5658/WOOD.2015.43.1.96