• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.7
• /
• pp.289-302
• /
• 2019

Structural change of time series means that the distribution of observations is relatively stable in the period of constituting the entire time series data, but shows a sudden change of the distribution characteristic at a specific time point. Within a non-stationary long-term time series, it is important to determine in a timely manner whether the change in short-term trends is transient or structurally changed. This is because it is necessary to always detect the change of the time series trend and to take appropriate measures to cope with the change. In this paper, we propose a method for decision makers to easily grasp the structural changes of time series by visualizing the test results based on the unit root test. Particularly, it is possible to grasp the short-term structural changes even in the long-term time series through the method of dividing the time series and testing it.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.484-492
• /
• 2003

How the characteristics and stability of the rubbing-induced alignment of nematic liquid crystals (LCs) relate to the interfacial characteristics of LC-polyimide has been studied. The characteristics of the LC alignment (such as the LC texture, the pretilt angle, and the anchoring energy) and their thermal stability have been investigated for 5 polyimides synthesized for this work. The work showed that the rubbed polyimide alignment layer induces the strong LC anchoring and that the characteristics and stability of LC alignment are determined by the short-ranged interactions between LC and polyimide molecules at the alignment layer surface. The increased flexibility of the polyimide accelerates thermal imidization, increases the pretilt angle, and improves the alignment stability. It also turned out that fluorination of the polyimide tends to deteriorate the alignment uniformity and stability. No distinct differences in the alignment characteristics were shown for the aromatic- and alicyclic-dianhydride polyimides.

• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.96-101
• /
• 2024

The Synthetic Aperture Radar (SAR) is equipped with a Transmitter/Receiver (TR) module, which serves as the signal transmission and reception unit for acquiring image data. The TR module generates significant heat during signal generation and amplification, potentially degrading performance or causing mission failure. Furthermore, launch and operational environments may result in structural damage to the components. Thus, assessing the thermal and structural safety of the TR module through thermal and vibration tests is essential to guarantee its safety. Safety assessments can be verified through environmental tests prescribed in MIL-STD-883. This paper explores the thermal and structural safety characteristics of the TR module by simulating test environments using finite element analysis prior to conducting environmental tests.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.153-158
• /
• 2019

The overall environmental regulations of the industry have been strengthened due to environmental pollution that occurred in modern society. Therefore, R&D of selective reduction catalyst (SCR) is needed to meet these environmental regulations. This paper carried out thermal analysis to develop the pneumatic damper valve (PDV), which is a key component of SCR system. For thermal analysis, verification of material properties was performed first. Verification was performed through the thermal properties test and the thermal tensile test of the specimen, and the results were reinforced with the material properties to enhance the reliability of the thermal analysis.The heat analysis was intended to identify thermal characteristics with PDV in total of three materials (SM400B, SS275, SB410) applied under the conditions of use of PDV, and to confirm the structural stability of the PDV.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.275-281
• /
• 2007

For a cooling performance research of the combustor operated in a extreme environment of a high temperature and high pressure, we accomplished a cooling performance analysis. Generally a heat transfer characteristic in cooling passage is known well experimentally and theoretically, however heat flux in the combustion chamber isn't. In this study, fluid flow combined with heat transfer analysis is accomplished about a combustor nozzle. We tried to analyze the cooling performance with a heat transfer characteristic of a gas and coolant side in the view point of quantity on the mass flow rate to be supplied to the cooling channel. And finally, evaluation on the thermal safety of nozzle wall material was accomplished.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.17-23
• /
• 2003

A sensor array (3${\times}$5$\textrm{mm}^2$ in diaphragm dimension) of 12 sensing clements with different operating temperatures was optimized with respect to thermal operation. This sensor array with single heater on a glass diaphragm over back-etched silicon bulk realizes a novel concept of a sensor array: an array of sensor clements operated at different temperatures can yield more information than single measurement. The proposed micro sensor array could provide well-integrated array structure because it had only single heater at the center of the diaphragm and used the various sensing properties of two kinds of metal oxide layers with various operating temperatures.

• Journal of Labour Economics
• /
• v.34 no.3
• /
• pp.59-80
• /
• 2011

Using methods for the analysis of non-stationary series and error correction models, this study estimates the elasticity of employment with regard to growth rate and its variability. The authors could not find any significant evidence that elasticity has reduced during the last 25 years, which implies that the slow-down of the employment growth did not result from a reduction of the elasticity but from the GDP growth slow-down. Therefore, policy efforts to enhance the capacity of job creation should be made in a manner that can extend the long-term growth potential.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.32-32
• /
• 1998

고체 추진제 로켓의 연소시에 발생되는 산화 알루미늄(A1$_2$O$_3$) 입자는 로켓 추진 노즐에서 팽창과정의 효율을 저하시키는 요소가 되며, 이러한 비효율성은 연소 가스와 입자간의 비평형 상태 효과와 기본적인 속도와 열적 차이에 의해서 발생된다고 보고되었다. 또한 연소시 발생된 산화 알루미늄 입자는 높은 열과 큰 운동량을 가지고 로켓 노즐 내부를 유동하게 되며, 매우 많은 량이 짧은 시간에 고온 고속으로 노즐 벽면이나 기타 구조물에 충돌 및 점착하기 때문에 로켓 노즐내의 표면이 손상을 입게 되고, 로켓의 방향 제어 및 조정 안정성이 저하되며, 구조적인 강도가 약화 될 수 있다. 또한 산화 알루미늄 액적들의 경우 노즐 벽면에 고착되게 되면 로켓의 중량 증가로 인해서 추력의 손실을 초래할 수 있다. 따라서 이러한 연소 부산물들의 운동 경로와 충돌 위치 및 표면에서의 충돌량과 그리고 충돌에 따른 마모량 및 점착 그리고 열전달 특성을 예측하는 것이 필수적이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.82-82
• /
• 2010

유기 쌍안정성 소자는 비휘발성 기억 소자 중에서 구조가 간단하고 제작비용이 저렴하며 유연성을 가지기 때문에 많은 연구가 진행되고 있다. 현재 유기물/무기물 나노복합소재를 사용하여 소자 성능 향상이 기억소자의 성능 향상을 위하여 여러 가지 유기물/무기물 나노복합소재를 사용하여 제작한 유기 쌍안정성 소자가 유연성을 가진 비휘발성 기억소자로 대두되고 있다. 본 연구에서는 ZnO 나노입자를 포함한 PMMA 복합층을 사용하여 제작한 유기 쌍안정성 기억소자를 제작하여 메모리 특성을 조사하였다. 이와 더불어 활성층에 효과적인 전하주입을 위하여 전극과 PMMA/ZnO 층 사이에 $C_{60}$ 층을 삽입한 구조를 가진 메모리 소자의 성능 향상에 대하여 연구하였다. Indium tin oxide 가 증착된 유리 기판위에 $C_{60}$ 층을 스핀코팅 방법으로 적층하였다. 1 wt% ZnO 나노입자와 1 wt% PMMA를 혼합하여 스핀코팅 방법으로 $C_{60}$ 층 위에 박막을 형성하였다. 그리고, 전극으로 Al을 열증착으로 형성하였다. $C_{60}$ 층이 있는 유기 쌍안정성 기억 소자와 $C_{60}$ 층이 없는 두 가지의 소자에 대하여 전류-전압 (I-V) 특성을 측정하여 각각의 소자에서의 전류 히스테리시스 현상이 발생하는 원인을 규명하였다. I-V 특성 결과와 전자적 구조를 사용하여 유기 쌍안정성 소자에서의 쓰기, 지우기 및 읽기 동작에 대한 과정을 설명하였다. 두 소자의 I-V 특성을 비교하므로 $C_{60}$ 층을 사용하여 유기 쌍안정성 소자의 성능이 향상됨을 알 수 있었다. 또한 $C_{60}$ 층을 사용하여 제작된 유기 쌍안정성 소자의 성능이 향상된 원인을 규명하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.70-80
• /
• 2019

Combustion tests using six bi-swirl coaxial injectors with different shapes and recess lengths were performed in a model combustion chamber capable of flame visualization. By utilizing gaseous methane and gaseous oxygen instead of actual propellants, the effects of injector design and experimental conditions on the flame structure and combustion stability were analyzed. It was found that not only the experimental conditions but also the injector geometry such as the recess length and orifice diameter had a considerable influence on the combustion stability. In addition, it was confirmed that the heat release pattern changed with the occurrence of combustion instability.