• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.385-388
• /
• 2013

본 논문에서는 3D 프린터의 다양한 활용분야를 소개한다. 3D 프린터의 원래의 목적은 상품을 내놓기 전 시제품을 만들기 위해서였으나 최근 들어 그 활용분야가 공업, 의료, 실생활 분야로 넓혀지고 있다. 공업 분야에서는 한 장씩 레이어를 쌓아가는 3D 프린터의 장점을 이용해 보다 정밀하고 세밀한 공정이 가능해 진다. 이러한 특성은 기존의 방식보다 진행시간을 5~10배 이상 단축시켜 제품개발에 소요되는 비용과 노력을 절감하는 뛰어난 효율성을 보여준다. 의료분야에서는 3D모형물을 그대로 제작할 수 있기 때문에 인간의 신체와 보다 흡사한 보형물을 만들 수 있다. 나아가 3D프린터가 상용화 된다면 판매사가 제공하는 3D 콘텐츠를 사용자가 쉽게 이해하고 이에 따른 피드백을 받아 빠르게 제품생산에 이용할 수 있어 상품에 대한 만족도를 높일 수 있게 된다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.1
• /
• pp.47-60
• /
• 2006

Due to the uneven illumination of FPD panel surface, it is difficult to detect the defects. The paper proposes a method to find the uneven illumination compensation using wavelets, which are done based on multi-resolution structure. The first step is to decompose the image into multi-resolution levels. Second, elimination of lowest smooth sub-image with highest frequency band removes the high frequency noise and low varying illumination. In particular, the main algorithm was implemented by lifting scheme for realtime inline process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.121.1-121.1
• /
• 2011

일반적으로 알콜계 물질은 가스 하이드레이트 형성에 저해제로 사용된다고 알려져 있으나, 최근의 연구를 통해 2-propanol이 일부 조건에서 촉진효과가 나타난다고 보고되고 있다. 본 연구에서는 알콜계 물질인 1-propanol과 2-propanol의 가스 하이드레이트 격자내로의 포집여부와 그로 인한 촉진 혹은 저해 작용 그리고 구조적 특성에 대해 알아보았다. $CO_2$와 $CH_4$ 기체에 대하여 1-propanol 혹은 2-propanol을 첨가하여 형성된 혼합 하이드레이트의 3상평형 기상(V)-물(Lw)-하이드레이트(H))을 측정하였다. 그 결과 $CO_2$의 경우 1-propanol과 2-propanol이 저해 작용을 함을 확인하였으며 농도가 높을수록 저해작용이 커짐을 알 수 있었다. 반면, $CH_4$의 경우 1-propanol에서는 저해 및 촉진효과가 거의 나타나지 않았지만, 2-propanol에서는 촉진효과가 나타났으며 5.6 mol%에서 촉진효과가 가장 크게 나타났다. 혼합 하이드레이트의 구조규명 및 동공 점유 분석을 위해 $^{13}C$ NMR과 XRD분석을 하였으며, 그 결과 2-propanol과 1-propanol을 포함하는 혼합 하이드레이트는 구조 II를 형성하며, 2-propanol과 1-propanol은 큰 동공에 포집되고, 기체는 작은 동공에 포집됨을 확인할 수 있었다. 본 연구의 결과는 알콜계 물질을 첨가제로 사용하는 가스 하이드레이트 공정에서 매우 유용한 기초자료가 될 것으로 사료된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1569-1574
• /
• 2011

In this study, the identification of the irradiated seafood cooking drips from Hizikia fusiformis, Enteroctopus dofleini and Thunnus thynnus was conducted. The physical detection methods used included photo-stimulated luminescence (PSL) and thermoluminescence (TL), and the chemical detection methods were hydrocarbons analysis. In the PSL study, all seafood cooking drip samples showed 260~510 photon counts; thus, the PSL method could not be used for the detection of irradiated seafood cooking drips. The TL method could be used for the detection of irradiated H. fusiformis and E. dofleini cooking drips. In both cooking drips, the shapes of the glow curves indicated a specific peak at 150$^{\circ}C$~250$^{\circ}C$, which made it possible to identify the irradiated samples. The hydrocarbons derived by gamma irradiation of T. thynnus cooking drip were not detected due to low concentration and inconsistent content of fatty acids in the untreated T. thynnus cooking drip.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.658-664
• /
• 2006

$\rho$, $\alpha$-dimethyl benzyl alcohol was resolved by the biphasic dynamic kinetic resolution (DKR). Acidic zeolite was used as a racemization catalyst while immobilized enzyme was employed for kinetic resolution. The effects of the process variables including nature of acyl donor, reaction temperature, substrate concentration, ratio of the two catalysts and stirring rate on the conversion and enantiomeric purity of the product were investigated. In DKR of $\rho$, $\alpha$-dimethyl benzyl alcohol, the product of 99% ee was obtained with a maximum yield of 88%. The high performance of the catalyst system was maintained in the condition of higher TON and under repeated use.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.317-325
• /
• 2019

A suction caisson has been widely used for anchor and foundation of offshore structures due to its broad application, simple installation, and rapid construction. In design of suction caisson foundation, the bearing capacity and the stability of soil are mainly dealt with and analysis methods for them are presented in design codes related to the foundation. On the other hand, the method for structural safety analysis of the suction caisson is not generalized, in particular for load modeling of the caisson under suction. Consequently, there are difficulties in design of the caisson cross section. For this reason, this study analyzed the magnitude and distribution of pore water pressure on inner and outer surface of the caisson using theoretical and numerical seepage analyse, and an approach to reasonably estimate the load applied to the structural analysis of the caisson was presented. Furthermore, effects of penetration depth, anisotropy of permeability, and suction pressure on the pore water pressure were analyzed.

• Composites Research
• /
• v.36 no.2
• /
• pp.80-85
• /
• 2023

A cylindrical composite lattice structure is manufactured by filament winding. The distribution of nonuniform fiber volume fraction induced by the manufacturing process can be observed. The stiffness and buckling characteristics can be influenced by non-uniform fiber volume fraction. In this paper, the effect of non-uniform fiber volume fraction through thickness direction on the torsional buckling load of the cylindrical composite lattice structure was examined. The stiffness variation induced by the non-uniform fiber volume fraction was applied to the finite element model, and buckling analysis was performed. The variations of buckling load with variations of fiber volume fraction were compared. The non-uniform fiber volume fraction reduced the torsional buckling load of the composite lattice structure.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.8-16
• /
• 2023

The importance of next-generation packaging technologies is being emphasized as a solution as the miniaturization of devices reaches its limits. To address the bottleneck issue, there is an increasing need for 2.5D and 3D interconnect pitches. This aims to minimize signal delays while meeting requirements such as small size, low power consumption, and a high number of I/Os. Hybrid bonding technology is gaining attention as an alternative to conventional solder bumps due to their limitations such as miniaturization constraints and reliability issues in high-temperature processes. Recently, there has been active research conducted on SiCN to address and enhance the limitations of the Cu/SiO₂ structure. This paper introduces the advantages of Cu/SiCN over the Cu/SiO₂ structure, taking into account various deposition conditions including precursor, deposition temperature, and substrate temperature. Additionally, it provides insights into the core mechanisms of SiCN, such as the role of Dangling bonds and OH groups, and the effects of plasma surface treatment, which explain the differences from SiO₂. Through this discussion, we aim to ultimately present the achievable advantages of applying the Cu/SiCN hybrid bonding structure.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.442-453
• /
• 2021

Purpose: The objective of this study is to suggest desirable direction of Korean accident investigation organization by analyzing the operation status and way of overseas developed countries' investigation agency. Method: To accomplish the objective of this study, we were examined four main characteristics of accident investigation agencies of the U.S., Japan, and Sweden, focusing on (1); the background of the establishment, (2);organizational structure, (3);major tasks and functions, (4); accident investigation procedures. Result: First, the purpose of its establishment and task is to prevent recurrence of disasters and accidents, at the same time, administrating and researching duties such as legal system, policy, recommending improvement and conducting scientific disaster-cause analysis to contribute safety for the government. Second, it is operated as an independent organization under the president, not belonging to the ministry, in order to enable fair investigation in an impartial position. Third, it has the authority to be recognized for its expertise in the results of investigation. In other words, it is operated as a permanent organization with professional personnel, and secures authority through the accident research with indepth investigation and high-quality recommendations. Conclusion: The overseas investigation agencies rapidly manage and coordinate their operational practices in order to resolve national requirements and social conflicts with fairness, accuracy and expertise in accident investigations. In order to prevent the recurrence of similar events, Korea needs to efficiently reconstruct its investigative functions distributed by each government department. In addition, institutional improvement is needed to make general adjustments at the national level, organize and operate control tower for when the accident has happened.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.473-481
• /
• 2012

This study was conducted to investigate the contents of ginsenosides and physiochemical properties of Panax ginseng after 9 times steaming and drying treatment by using the new auto steamer which is more fast and simple than previous report. In the process of steaming and drying, the content of six major ginsenosides such as Rg1, Re, Rb1, Rc, Rb2 and Rd were gradually decreased. On the other hand, the content of seven minor ginsenosides includes Rh1, 20(S)-Rg2, 20(R)-Rg2, 20(S)-Rg3, 20(R)-Rg3, Rk1 and Rg5 were gradually increased. We observed the protopanxadiol ginsenosides such as Rb1, Rb2, Rc and Rd were converted into 20(S)-Rg3, 20(R)-Rg3, Rk1 and Rg5; similarly protopanxatriol ginsenosides of Rg1 and Re were converted into Rh1, 20(S)-Rg2 and 20(R)-Rg2. Based on the result of fresh ginseng, the contents of reducing sugar, acidic polysaccharide and total phenolic compounds were gradually increased and reached to maximum at 7 times repetitive steaming process of the fresh ginseng. Whereas DPPH radical scavenging activities were gradually decreased to 68% at 7 times steaming. New auto 9 repetitive steaming and drying process has similar production with original methods, but content of benzo(a)pyrene were not almost detected comparatively taking less time. The present results suggested that this method is best for the development of value-added ginseng industry related products.