• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.93-101
• /
• 2011

High quality X-ray computed microtomography (micro-CT) imaging of internal microstructures and pore space in geomaterials is often hampered by some inherent noises embedded in the images. In this paper, we introduce image calibration techniques for removing the most common noises in X-ray micro-CT, cupping (brightness difference between the periphery and central regions) and ring artifacts (consecutive concentric circles emanating from the origin). The artifacts removal sequentially applies coordinate transformation, normalization, and low-pass filtering in 2D Fourier spectrum to raw CT-images. The applicability and performance of the techniques are showcased by describing extraction of 3D pore structures from micro-CT images of porous basalt using artifacts reductions, binarization, and volume stacking. Comparisions between calibrated and raw images indicate that the artifacts removal allows us to avoid the overestimation of porosity of imaged materials, and proper calibration of the artifacts plays a crucial role in using X-ray CT for geomaterials.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.165-174
• /
• 2010

In this paper, a two-phase structural health monitoring system using acceleration response signatures are presented to firstly alarm the change in structural condition and to secondly detect the changed location for full-scale concrete girder bridges. Firstly, Mihocheon Bridge which is a two-span continuous concrete girder bridge is selected as the target structure. The dynamic response features of Mihocheon Bridge are extracted by forced vibration test using bowling ball. Secondly, the damage alarming occurrence and the damage localization techniques are selected to design two-phase structural health monitoring system for Mihocheon Bridge. As the damage alarming techniques, auto-regressive model using time-domain signatures, correlation coefficient of frequency response function and frequency response ratio assurance criterion are selected. As the damage localization technique, modal strain energy-based damage index method is selected. Finally, the feasibility of two-phase structural health monitoring systems is evaluated from static loading tests using a dump truck.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.137-145
• /
• 2006

A user remembers a melody as not the combination of pitch and duration which is written in score but the contour which is composed of the relative pitch and duration. Because of the way of remembering a melody the previous Music Information Retrieval Systems which uses keyboard Playing or score as the main input melody are not easily acceptable in Query By Humming Systems. In this paper, we mention about the considerable checkpoints for Query By Humming System and previous researches. And we propose the feature extraction which is similar with the way of remembering a melody and similarity computation algorithms between melody in humming and melody in music. The proposed similarity computation algorithms solves the problem which can be happened when only uses the relative pitches by using relative durations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.6
• /
• pp.446-452
• /
• 2000

This study was carried out to investigate the effect of mine activity on paddy fields, agricultural water, and plants in the ruined Oksung Cu-Zn mine area. Soil samples collected from paddy fields adjacent to the Cu-Zn mine sites were sequentially extracted and determined the contents of heavy metals such as Cd, Zn, Cu, Pb, Cr and Ni. Distribution of exchangeable heavy metals in soils was 30.2% of Cd, 11.3% of Zn, 2.2% of Cu, 4.6% of Cr, 0.6% of Pb and 3.9% of Ni. Water soluble heavy metals were only detected with Zn. The contents of heavy metals in water collected from the mine were 0.01 of Cd, 27.35 of Zn, 4.86 of Cu, 1.04 of Pb, 0.03 of Cr and $0.08mg\;L^{-1}$ of Ni. while the contents in waler collected out of the mine were 16.67 of Zn, 0.59 of Cu, 0.49 of Pb, 0.05 of Cr and $0.06mg\;L^{-1}$ of Ni. On the other hand, agricultural water near mine area were 1.26 of Zn, 0.05 of Cu, 0.05 of Pb and $0.02mg\;L^{-1}$ of Ni. Both Cd and Cr were not detected in the agricultural water.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.457-469
• /
• 2009

Applicability of bioleaching techniques using a sulfur-oxidizing bacteria, Acidithiobacillus thiooxidans, for remediation of shooting range soil contaminated with toxic heavy metals was investigated. The effects of sulfur concentration, the amount of bacterial inoculum and operation temperature on the efficiency of heavy metal solubilization were examined as well. As sulfur concentration and the amount of bacterial inoculum increased, the solubilization efficiency slightly increased; however, significant decrease of heavy metal extraction was observed with no addition of sulfur or bacterial inoculum. Bacteria solubilized the higher amount of heavy metals at $26^{\circ}C$ than $4^{\circ}C$. Lead showed the highest removal amount from the contaminated soil but the lowest removal efficiency when compared with Zn, Cu and Cr. It was likely due to formation of insoluble $PbSO_{4(s)}$ as precipitate or colloidal suspension. Sequential extraction of the microbially treated soil revealed that the proportion of readily extractable phases of Zn, Cu and Cr increased by bacterial leaching, and thus additional treatment or optimization of operation conditions such as leaching time were required for safe reuse of the soil. Bioleaching appeared to be a useful strategy for remediation of shooting range soil contaminated with heavy metals, and various operating conditions including concentration of sulfur input, inoculum volume of bacteria, and operation temperature exerted significant influence on bioleaching efficiency.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.736-745
• /
• 2002

In network delivery of compressed video, packets may be lost if the channel is unreliable like Internet. Such losses tend to of cur in burst like continuous bit-stream error. In this paper, we propose an effective error-concealment approach to which an error resilient video encoding approach is applied against burst errors and which reduces a complexity of error concealment at the decoder using data hiding. To improve the performance of error concealment, a temporal and spatial error resilient video encoding approach at encoder is developed to be robust against burst errors. For spatial area of error concealment, block shuffling scheme is introduced to isolate erroneous blocks caused by packet losses. For temporal area of error concealment, we embed parity bits in content data for motion vectors between intra frames or continuous inter frames and recovery loss packet with it at decoder after transmission While error concealment is performed on error blocks of video data at decoder, it is computationally costly to interpolate error video block using neighboring information. So, in this paper, a set of feature are extracted at the encoder and embedded imperceptibly into the original media. If some part of the media data is damaged during transmission, the embedded features can be extracted and used for recovery of lost data with bi-direction interpolation. The use of data hiding leads to reduced complexity at the decoder. Experimental results suggest that our approach can achieve a reasonable quality for packet loss up to 30% over a wide range of video materials.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.63-73
• /
• 2016

The volatile flavor components of the fruit pulp and peel of orange (Citrus sinensis) and grapefruit (Citrus paradisi) were extracted by simultaneous distillation-extraction (SDE) using a solvent mixture of n-pentane and diethyl ether (1:1, v/v) and analyzed by gas chromatography-mass spectrometry (GC-MS). The total volatile flavor contents in the pulp and peel of orange were 120.55 and 4,510.81 mg/kg, respectively, while those in the pulp and peel of grapefruit were 195.60 and 4,223.68 mg/kg, respectively. The monoterpene limonene was identified as the major voltile flavor compound in both orange and grapefruit, exhibiting contents of 65.32 and 3,008.10 mg/kg in the pulp and peel of orange, respectively, and 105.00 and 1,870.24 mg/kg in the pulp and peel of grapefruit, respectively. Limonene, sabinene, ${\alpha}$-pinene, ${\beta}$-myrcene, linalool, (Z)-limonene oxide, and (E)-limonene oxide were the main volatile flavor components of both orange and grapefruit. The distinctive component of orange was valencene, while grapefruit contained (E)-caryophyllene and nootkatone. $\delta$-3-Carene, ${\alpha}$-terpinolene, borneol, citronellyl acetate, piperitone, and ${\beta}$-copaene were detected in orange but not in grapefruit. Conversely, grapefruit contained ${\beta}$-pinene, ${\alpha}$-terpinyl acetate, bicyclogermacrene, nootkatol, ${\beta}$-cubebene, and sesquisabinene, while orange did not. Phenylacetaldehyde, camphor, limona ketone and (Z)-caryophyllene were identified in the pulp of both fruits, while ${\alpha}$-thujene, citronellal, citronellol, ${\alpha}$-sinensal, ${\gamma}$-muurolene and germacrene D were detected in the peel of both fresh fruit samples.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.77-86
• /
• 2013

In this paper, we propose a fast video retargeting method which preserves the contents of a video and converts the image size. Since the conventional Seam Carving which is the well-known content-aware image retargeting technique uses the dynamic programming method, the repetitive update procedure of the accumulation energy is absolutely needed to obtain seam. The energy update procedure cannot avoid the processing time delay because of many operations by the image full-searching. By applying the proposed method, frames which have similar features in video are classified into a scene, and the first frame of a scene is resized by the modified Seam Carving where multiple seams are extracted from candidate seams to reduce the repetitive update procedure. After resizing the first frame of a scene, all continuous frames of the same scene are resized with reference to the seam information stored in the previous frame without the calculation of the accumulation energy. Therefore, although the fast processing is possible with reducing complexity and without analyzing all frames of scene, the quality of an image can be analogously maintained with an existing method. The experimental results show that the proposed method can preserve the contents of an image and can be practically applied to retarget the image on real time.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1357-1364
• /
• 2000

Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.