• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.8-15
• /
• 2014

In order to satisfy stringent future emission regulation in diesel engines, systematic approaches to mitigate the harmful exhaust emissions were developed, such as engine hardware, fuel injection equipment, engine control, and after-treatment system. In this study, to improve the nano-particle and NOx emissions from a state-of-the-arts diesel engine, effect of various EGR and fuel injection pressure with combustion analysis were evaluated. Size-resolved nano-particle and NOx emissions showed trade-off characteristics with various EGR rate and increment of fuel injection pressure.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.586-587
• /
• 2012

자동차 산업에 있어서 반도체 기술발전과 더불어 차량 내 기능들이 효율성, 경제성 및 친환경적인 관심을 고려하여 기계식 방식에서 전력전자식 방식으로 대체되고 있는 실정이다. 엔진의 연비를 향상시키기 위해서는 엔진의 연소효율을 개선하거나, 엔진에서 발생되는 손실을 줄이는 것이 필요한데, VVA(Variable Valve Actuation, 가변 밸브 작동) 기술은 엔진 흡기 유동 강화, 펌핑 손실 저감, 기계적 마찰 손실 저감등을 통해 엔진의 연비를 향상시킬 수 있다. 또한 VVA 엔진을 장착한 차량은 차량의 발진 응답성이 향상되고, 배기가스 배출량을 줄일 수 있어 친환경 저연비 차량을 실현하는데 핵심 차량부품기술이다. 최근까지 차량의 전동기 구동의 경우 DC모터 방식이 많이 적용되어 왔으나 DC모터의 내구성 및 효율 등의 이유로 BLDC모터로 바뀌고 있는 추세이다. 본 논문에서는 이와 같은 VVA 기구의 적용을 위하여 BLDC모터 제어기를 개발하였다.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.603-618
• /
• 1995

원자력 발전소 및 동위원소 사용기관에서 발생되는 가연성 고체 폐기물 및 유기폐액의 소각기술의 활용에 있어서 이의 안전성 확보를 위한 기술적 기준의 설정을 위한 고려인자들을 조사하였다. 국내외의 소각기술 활용현황을 알아보았고 본 기술의 국내 도입시 필요한 기술적 안전지침에 관한 외국의 사례를 조사하고 국내 관련 규정도 검토, 비교, 분석하여 주요 고려항목을 도출하였다. 안전성 확보를 위한 고려 항목을 크게 일반산업시설 적용항목, 원자력시설 상 안전조건, 소각시설의 기술적 요구사항, 기타 제반사항으로 나누어 제시할 수 있었다. 이들 내용은 기존 원자력 및 환경시설에 적용되는 안전성분석보고서 및 환경영향평가서로 작성될 수 있다고 보았으며 시설의 개요, 시설의 기술적 사항과 이에 따르는 안전을 위한 조건, 폐기물의 인수조건 등이 포함되며 기존 관련 법규의 적용 및 확인이 필요하였다. 기술적 사항에는 공정의 제염계수, 연소효율, 소각재의 형상, 배기가스의 방출농도, 작업자 및 인근주민의 피폭등이 확인되어야 하며 소각재의 처리방법 및 조건이 제시되어야 하고 소각재의 침출특성 등이 주요한 인자라고 보았다. 아울러 소각대상폐기물의 인수조건이 명시되어 소각성능에 따른 이의 안전성이 입증되어야 한다. 따라서 인허가 후 건설된 시설에서의 사용전 시험소각절차의 제시 및 이에 대한 관련 규제기관의 검사제도가 있어야 하며 품질보증절차 역시 관련지침에 따라 실시되어야 한다. 이와 같은 내용을 포함하는 안전기술지침의 설정이 절대적으로 필요하며 본 연구조사 결과의 활용이 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.97-110
• /
• 2005

This paper is the second part of a literature review describing the current status of biomass energy use in the USA. The bioenergy technologies that convert biomass resources to a form of energy were presented, in particular focused on existing coal fired boiler, high efficiency gasification combined cycle. We presented latest biomass power energy supply, economic issues such as its production and plant investment cost in the Part I. In the Part II, our review summarized policy and market issues for electricity consumers, benefits from biomass power which could offer an alternative to conventional energy sources in the form of environmental, rural economic growth, and national energy security in the USA.

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.18-25
• /
• 2005

In this study, numerical analysis of two-dimensional unsteady natural convection of air in a square enclosure heated from below, was performed as a basic research of fire science. SIMPLE algorithm was used to the pressure term of momentum equations in the numerical analysis. The numerical analysis were studied for the two model cases and two heat conditions, respectively, which are different with insulation of enclosures and position of heat applied. Also, the ceiling temperatures of enclosure were measured to compare the accuracy of numerical analysis, and it is found that the temperature predicted by numerical analysis were agreed well with the measurements. Streamline and isotherm of the each model case were acquired for each time step.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.23-29
• /
• 1999

Experimental studies are conducted to investigate the flame stability and the thermal/fuel NOx formation characteristics of the low calorific value (LCV) coal derived gas fuel. Synthetic LCV fuel gas is produced by mixing carbon monoxide, hydrogen, nitrogen and ammonia on the basis that the thermal input of the syngas fuel into a burner is identical to that of natural gas. The syngas mixture is fed to and burnt with air on flat flame burner. With the variation of the equivalence ratio for specific syngas fuel, flame behaviors are observed to identify the flame instability due to blow-off or flashback and to define stable combustion range. Measurements of NOx content in combustion gas are made for comparing thermal and fuel NOx from the LCV syngas combustion with those of the natural gas one. In addition, the nitrogen dilution of the LCV syngas is preliminarily attempted as a NOx reduction technique, and its effects on thermal and fuel NOx production are discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.170-171
• /
• 2012

$Fe_2O_3$, Al, Cr과 Si 분말을 고 에너지 볼 밀링해서 나노분말을 제조한 후 고주파유도 가열 활성 연소합성 장치로 1분 이내의 짧은 시간에 합성 및 소결한 $Al_2O_3+4.65(Fe_{0.43}Cr_{0.17}Al_{0.323}Si_{0.077})$, $Al_2O_3$ + 5.33 ($Fe_{0.375}Cr_{0.11}Al_{0.3}Si_{0.075}$), $Al_2O_3$ + 6.15 ($Fe_{0.325}Cr_{0.155}Al_{0.448}Si_{0.072}$), $Al_2O_3$ + 3.3 ($Fe_{0.6}Cr_{0.3}Al_{0.6}$) 소결체 시편을 $700^{\circ}C$의 온도에서 100시간 동안 공기 중에서 산화 및 $N_2-H_20-H_2S$ 혼합 가스 내에서 황화 부식을 실시하였다. 그 결과 산화 및 황화 부식 후에 ${\alpha}-Al_2O_3$가 표면에 생성되어 보호 피막으로 작용하여 우수한 내식성을 보였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.96-102
• /
• 2015

Traditional propellants emit toxic gases such as carbon dioxide and hydrogen chloride during combustion which are harmful to the environment. This study established a synthetic process of a high nitrogen containing derivative of tetrazine, 3,3-Azobis(6-Amino-1,2,4,5-Tetrazine) (DAAT), which can be applied as solid fuels for a solution to environmental concerns. Also, this paper described the detailed process and the analytic results of properties, which were not mentioned in previous reports. The compound was characterized by NMR, IR spectroscopy, and thermal, impact, and friction stability were measured. In addition, the heats of formation (${\Delta}H_f$) and detonation properties (pressure and velocity) of DAAT were calculated using Gaussian 09 and EXPLO5 programs.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.70-78
• /
• 2014

A numerical study has been conducted to investigate flow and heat transfer characteristics of supersonic second throat exhaust diffusers for high altitude simulation. By changing pressure and configuration, flow and cooling characteristics of the diffuser have been studied. At the normal operation of the diffuser, there were high temperature regions over 3,000 K without cooling, especially near wall and in subsonic diffuser part. If the cooling system of the diffuser is added, flow velocity is increased due to the cooled wall temperature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.45-52
• /
• 2020

In this paper, a subminiature solid rocket motor(SSRM) was designed to develop a miniature smart-bullet and the designed propellant grain was made of thermoplastic propellant for production convenience of inner shape. The internal ballistics analysis and ground test were performed to investigate the performance of SSRM. And a numerical simulation was carried out to obtain basic data on the design of safety distance between the nozzle outlet and a gunner, the temperature distribution of exhaust gas was analyzed by comparing a numerical simulation and the results of IR camera.