• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.2
• /
• pp.49-57
• /
• 1991

A simple system to measure the correlated color temperature ($T_c$) and color rendering index ($R_a$) oflight sources was developed. And the T, and R, of incandescent lamps (I/L) and various fluorescent lamps(F/L) were measured with varying source voltage and power frequency. As results, $T_c$ variations of I/L and F/L with varying source voltage were relatively large, but $R_a$, variations were small. And $T_c$, $R_a$, variations of F/L under 5OkHz of power frequency were small, but over 50kHz, it is supposed that $T_c$, and $R_a$, will vary significantly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.396.1-396.1
• /
• 2014

백색 유기발광소자는 빠른 응답속도, 높은 색재현율 및 높은 색안정성의 특성으로 차세대 친환경 백색 광원으로 많은 주목을 받고 있다. 유기발광소자와 양자점을 혼합하여 사용한 백색 유기발광소자는 양자점의 높은 색순도와 고효율의 장점을 가지고 있기 때문에 연구가 활발하게 진행되고 있다. 녹색 및 적색 양자점을 색변환층으로 이용한 백색 유기발광소자는 두 양자점의 혼합 비율에 따라 연색성 및 색안정성이 변화하기 때문에 이에 관련 된 연구가 필요하다. 본 연구에서는 높은 색안정성을 가지는 백색 유기발광소자를 제작하기 위해 청색 유기발광소자 위에 용액 공정으로 녹색 및 적색 빛을 방출하는 CdSe/ZnS 양자점을 포함하는 색변환층을 도포했다. 녹색 및 적색 양자점은 250 nm부터 500 nm의 넓은 광 흡수대역을 가지고 있기 때문에 465 nm의 청색 발광소자의 빛을 흡수하여 각각 적색과 녹색 발광을 할 수 있다. 녹색 및 적색 양자점의 혼합 비율에 따른 광발광 스펙트럼 측정 결과를 통해 녹색 및 적색 양자점의 최적 혼합 비율이 7:3임을 확인하였다. 최적의 혼합 비율을 사용하여 제작 된 백색 유기발광소자의 전기적 및 광학적 특성을 전류-전압 측정과 전계발광 측정으로 비교 분석하였다. 9 V에서 14 V로 전압이 변화하는 동안 백색 유기발광소자의 색좌표의 변화는 (0.35, 0.33)에서 (0.35, 0.32)로 높은 색안정성을 나타냈다. 본 연구 결과는 유기발광소자와 양자점을 혼합하여 사용한 백색 유기발광소자의 높은 색안정성에 대한 기초자료로 활용할 수 있다.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.56-63
• /
• 2013

Daylighting system is an alternative lighting system using daylight collecting device, light transformer and light diffuser. In this paper, we developed a daylighting system in which the collecting device composed by dual parabolic reflectors, the silica optical fiber adapted to the light transformer and light diffuser made of the polyglass square sheet. We have estimated the system efficiency and general color rendering index(Ra) of the developed system. The system efficiency measured to 23.8% and Ra was revealed as 95. Ra number of the developed system is bigger than the number(65) of the previous fresnel lens based sunlight collector.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.266-273
• /
• 1995

Colors reproduced by color imaging system are affected by various physical factors. The spectral response of the color image sensor is one of the important factors. We developed a spectral response characteristics measurement system which is composed of optical part and color analyzing part. The data from the optical part was analyzed by the color analyzing part and spectral response characteristics of R, G, B three color sensors were obtained. Using this system, the spectral response characteristics of a CCD color camera was measured. From this result, color rendition and linearity of the camera could be analyzed. This measurement system is $.$considered to be very useful for the evaluation of color image sensor characteristics. stics.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.81-84
• /
• 2008

1960년대 중반부터 이미 고압 나트륨램프에 사용되어 오던 반투명의 세라믹 재료(Polycrystalline Ceramic Alumina ; PCA)를 기존 메탈핼라이드램프의 석영(Quartz) 발광관에 적용시킨 세라믹 메탈핼라이드(Ceramic Metal Halide ; CMH) 램프는 1995년 처음 소개된 이래 색 제어, 연색성, 광속유지율 등에서 전통적인 석영 메탈핼라이드(Quartz Metal Halide ; QMH)램프보다 우수한 특성을 가지고 있어 저와트급(150W이하)에서 고와트급에 이르기까지 폭넓게 사용되어지고 있으며 현재 국내에서도 이러한 CMH램프의 개발이 진행 중이다. 본 논문에서는 CMH램프의 우수한 특성을 살펴보기 위하여 국외 선진제품에 대한 전기적, 광학적 특성을 살펴보았으며 실험 결과 CMH 램프의 광속유지 율이 기존 QMH 램프보다 우수한 특성을 갖는 것을 확인할 수 있었다.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.31-40
• /
• 2011

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.31-36
• /
• 2011

LED is expected as an environmentally friendly next generation light source with its good reliability and long lifetime. The light sources for illumination have a variety of applications in the indoor and outdoor, and the variation of optical power and color rendering of the light source limits their applications. Therefore, it is necessary to research the LED lamp and its luminaire to minimize the variation of dynamic characteristics and to improve the color rendering due to that illuminating environment. Daylight is very good light source to human and can be used as primary or a secondary light source with benefits of energy, productivity and health.This paper presents the design method of LED lighting system to improve poor property in terms of CR(color redering) characteristic to use daylight effectively.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.1
• /
• pp.99-106
• /
• 2019

This study aims to recommend the proper Color rendering index (CRI), the Correlated Color Temperature (CCT), and illuminance levels of Light-Emitting Diode (LED) lighting based on the analysis of the criteria of the current CRI, the CCT, and illuminance levels in merchandising spaces with LED lighting conditions. It would be a basic material to apply in line with user preference for LED merchandising lighting. To this end, it examines relevant literature review on the experiments designed to test whether lighting characteristics affect brightness perception, color appearance, and pleasantness. Highly saturated colors appear brighter than low saturated colors. Two lighting applications - grocery and clothing shop - were created in elaborating the effect of LED lighting characteristics of CRI on color appearance and the CCT and illuminance on pleasantness. The findings show that the criteria of CIE Ra<80 are appropriate to provide better color appearance of illuminated products in terms of LED lighting that can enhance color saturation, particularly for the red color. Furthermore, 2700 K and less than 500 lux for grocery, 4000 K and more than 500 lux for clothing shop are found to be the proper the CCT and illuminance levels respectively to bring better preference under LED lighting.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.122-126
• /
• 2010

In this article photoluminescence of the $Al_2O_3:xCr_2O_3$ solid solutions prepared by solid state reaction method are represented. The effect of $Cr_2O_3$-activator concentration and heat treatment time on the PL characteristics have been discussed in conjunction with microstructure of phosphor samples. The $Al_2O_3:xCr_2O_3$ phosphors show the highest PL intensity at x=0.003 mole when the samples are reacted at $1600^{\circ}C$ for 5 h. The PL emission and absorption spectra show the maximum peaks at 698 nm and at 398 nm respectively. The CIE color coordinate is (x=0.646, y=0.316) at 0.003 mole $Cr_2O_3$, which value is very close to the NTSC coordinate of red color. This characteristic feature of $Al_2O_3:xCr_2O_3$ has been applied for an additive to improve the color characteristic of other red phosphor $LiEuW_2O_8$ which has a relatively poor color purity with an emission peak centered at 615 nm and with a CIE coordinate (x=0.530, y=0.280). The $Al_2O_3:0.003Cr_2O_3$ phosphor has been mixed with the $LiEuW_2O_8$ phosphor powder and the PL characteristics and CIE color coordinates are characterized. The $Al_2O_3:xCr_2O_3$ phosphor was found effective for improving the CRI (color rendering index) of $LiEuW_2O_8$ phosphor.

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.22-27
• /
• 2006

This paper presents the control system of high-efficiency automotive 35W metal-halide lamp ballast using the new control method and planar transformer. In this paper, the electronic ballast is designed so that digital control method by microcontroller can be applied to the electronic ballast for the lamp requirement and peripheral environment in order that metal-halide lamp, which has the complicated transient features, is to be applied to the automobile even if it has superior features in brightness, color rendering, light efficiency, and lifespan compared to the conventional halogen lamp. Also, the efficiency increase of the ballast is devised by being varied the switching frequency of Flyback Converter following the battery input voltage of the automobile. Being designed for high-frequency switching transformer of converter in planar form, reduction of loss, weight, overall size are realized and efficient power control in the automobile that had the limited energy and the limited space of battery is devised. The results of the proposed system is verified through various experiment results.