• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.65-70
• /
• 2000

Although the net-shape molding of composites is generally recommended, molded composites frequently requires cutting or grinding due to the dimensional inaccuracy for precision machine elements. During the composite machining operations such as cutting and grinding, the temperature at the grinding area may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the grinding point during surface grinding of carbon fiber epoxy composite was measured. The grinding temperature and surface roughness were also measured to investigate the surface grinding characteristics of the composites. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed, feed speed, depth of cut and stacking angle. From the experimental investigation, the optimal conditions for the composite surface grinding were suggested.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.15-20
• /
• 1999

In this study, the effects of the maximum grit depth of cut on the grinding characteristics were investigated. And AE signals produced during grinding processes have been studied to find out the appropriate AE parameters for assessing grinding processes. S45C steel has been ground under the conditions yielding removal rate of workpiece, 100, 200, 300 and 400rnm$^3$/min which was achived by altering workpiece velocity($\upsilon$) and apparent depth of cut(Z). According to the experimental results, the value of surface roughness increases but grinding power, energy rate of AE signal(AErms$^2$) and specific grinding energy consumed decrease with increase of the maximum grit depth of cut.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.90-95
• /
• 2005

To perform the finish outside-diameter grinding process of ferrules which are widely used as fiber optic connectors, a high-precision centerless grinding machine is necessary. In this study, the thermal characteristics of the high-precision centerless grinding machine such as the temperature distribution, temperature rise and thermal deformation, are estimated based on the virtual prototype of the grinding machine and the heat generation rates of heat sources related to the machine operation conditions. The reliability of the predicted results is demonstrated by the temperature characteristics measured from the physical prototype. Especially, the predicted and measured results show the fact that the high-precision centerless grinding machine consisted of the hydrostatic GW and RW spindle systems, hydrostatic RW feeding mechanism, RW swivel mechanism, on-machine GW and RW dressers, and concrete-filled steel bed, has very stable thermal characteristics.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.16-22
• /
• 2018

Silicon carbide (SiC) is used in various semiconductor processes because it has superior thermal, mechanical, and electrical characteristics as well as higher chemical and corrosion resistance than existing materials. Due to these characteristics, various manufacturing technologies have been developed for SiC. A recent development among these technologies is Chemical Vapor Deposition SiC (CVD-SiC). Many studies have been carried out on the processing and manufacturing of CVD-SiC due to its different material characteristics compared to existing materials like RB-SiC or Sintered-SiC. CVD-SiC is physically stable and has excellent chemical and corrosion resistance. However, there is a problem with increasing the thickness, because it is manufactured through a deposition process. Additionally, due to its high strength and hardness, it is difficult to subject to machining.

• 한국식품영양과학회지
• /
• 제33권1호
• /
• pp.152-157
• /
• 2004

연삭식 정미기를 이용하여 도정한 쌀의 도정 정도에 따른 수력함량은 12.81∼13.15%로서 연삭 횟수가 증가할수록 약간 증가하는 경향이었으며, 조단백질 및 조지방 함량은 각각 7.81∼8.50% 및 1.07∼l.93%로서 도정 정도가 클수록 감소하였으나 백미보다는 높았고, 조지방의 주요 지방산은 palmitic acid(22.06∼25.76%, peak area %), oleic acid(34.04∼35.62%) 및 linoleic acid(39.58∼42.22%)로 확인되었다. 백도는 현미와 백미의 중간 정도이었으며, 쌀눈 부착률은 연삭 4회 및 연마 1회 시료의 경우에도 39.33%에 이르러 백미(4.00%)보다 매우 높은 비율을 나타냈으며, 천립중은 현미와 유의적 차이(p<0.05)가 없었다. 주사전자현미경 관찰 결과 연삭 4회 및 연마 1회 시료는 표면의 매끄러움이 백미와 비슷한 반면 쌀눈이 일부 부착되어 있었다. 취반 후 관능평가 한 결과 연삭,3회, 연삭 4회, 연삭 4회 및 연마 1회 시료는 백미와 유의적 차이가 없거나(맛) 약간 낮은 선호도(색깔, 냄새, 조직감, 전체적 기호도)를 나타냈으나 현미보다 월등히 높은 선호도를 나타내어 영양가 있는 쌀로서 이용되기에 좋은 것으로 판단된다.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.7-16
• /
• 1999

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.205-207
• /
• 1999

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.608-611
• /
• 2005

As the optical communication industry is developed, the demand of optical communication part is increasing. $ZrO_2$ ceramic ferrule is very important part which can determines the transmission efficiency and information quality to connect the optical fibers. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that the error of feeding system is improved. Therefore, we estimated the dynamic characteristics in feeding system of ultra precision co-axial grinding machining system. Then, we performed the machining characteristics experiment.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.63-67
• /
• 2008

전자산업의 소형화와 경량화 추세에 맞추어 최근 집적 칩(IC)이나 패키지를 적층시키는 삼차원 집적화(3D integration) 기술 개발은 차세대 핵심기술로 중요시되고 있다. 본 연구에서는 삼차원 집적화 공정 기술 중 하나인 초박막 실리콘 웨이퍼 연삭(grinding)공정이 웨이퍼 표면에 미치는 영향에 대해서 조사하였다. 실리콘 웨이퍼를 약 $30{\mu}m$과 $50{\mu}m$ 두께까지 연삭한 후, 미세연삭(fine grinding) 단계까지 처리된 시편을 건식 연마(dry polishing) 또는 습식 애칭(wet etching)으로 표면 처리된 시편들과 비교 분석하였다. 박막 웨이퍼 두께는 전계방시형 주사전자현미경과 적외선 분광기로 측정하였고, 표면 특성 분석을 위해선 표면주도(roughness), 표면손상(damage), 경도를 원자현미경, 투과정자현미경 그리고 나노인덴터(nano-indentor)를 이용하여 측정하였다. 표면 처리된 시편의 특성이 표면 처리되지 않은 시편보다 표면주도와 표면손상 등에서 현저히 우수함을 확인 할 수 있었으나, 경도의 경우 표면 처리의 유무에 관계없이 기존의 벌크(bulk)실리콘 웨이퍼와 오차범위 내에서 동일한 것으로 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.32-36
• /
• 2002

This paper presents the structural characteristic analysis of a centerless grinding machine with concrete bed. The centerless grinding machine is composed of grinding wheel head, regulating wheel head, concrete bed, wheel dresser and so on. Especially, the concrete bed is introduced to improve the static, dynamic and thermal characteristics of the centerless grinding machine. The structural analysis model of centerless grinding machine is constructed by the finite element method, and the structural characteristics in the design stage are estimated based on the structural deformation and harmonic response under the various testing conditions related to gravity force and directional farces