• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.55-59
• /
• 2010

High VOC(Vehicle Operating Cost) is the main reason for the rehabilitation of paved road and VOC is composed of fuel consumption, lubricant oil consumption, parts consumption, etc. Fuel consumption is one of the largest components of VOC and the roughness of road represents the deterioration level of the road. For these reasons, the fuel consumption is measured for different IRI(International Roughness Index) in this study. The fuel consumption was measured by processing the voltage signal of fuel injector of vehicle and the speed was measured with GPS. The change rate of fuel consumption for different IRI can be calculated with the results of this test. It's concluded that fuel consumption(L/100km) of medium and large passenger car increases 7 times fast of the increase of IRI(m/km) around 3.5m/km in the speed range of 40 ~ 100km/h, and fuel consumption is the best at 60km/h.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.327-333
• /
• 2019

The Fuel-cut driving is started when the acceleration pedal released with transmission gear engaged. Fuel economy of the vehicle improves by active fuel-cut driving. A deep-learning technique is proposed to predict fuel-cut driving with vehicle speed, acceleration and road gradient data in the study. It's 3~10 of hidden layers and 10~20 of variables and is applied to the 9600 data obtained in the test driving of a vehicle in the road of 12km. Its accuracy is about 84.5% with 10 variables, 7 hidden layers and Relu as activation function. Its error is regarded from the fact that the change rate of input data is higher than the rate of fuel consumption data. Therefore the accuracy can be better by the normalizing process of input data. It's unnecessary to get the signal of vehicle injector or OBD, and a deep-learning technique applied to the data to be got easily, like GPS. It can contribute to eco-drive for the computing time small.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.71-79
• /
• 2010

As hypersonic flight speeds and engines efficiencies increase, heat loads on an aircraft and it's engine increase. Because the temperature of the air flow is too high to cool the aircraft structure at hypersonic flight speeds, it is essential to use the aircraft fuel as the primary coolant. Endothermic fuels are liquid hydrocarbon aircraft fuels which are able to absorb the heat loads by undergoing endothermic reactions, such as thermal and catalytic cracking. The endothermic reactions are improved by catalysts which change the extent of reaction and product distribution. At high temperature, liquid hydrocarbons would lead to coke formation that can reduce the effectiveness of heat exchanger and cause rapid degradation of the catalyst, thus endothermic capacity of endothermic fuels is limited to the temperature at which coke doesn't form. In this study, the essential cooling technologies by applying endothermic fuels and the properties of the endothermic fuels are described.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.315-323
• /
• 1995

차세대의 새로운 발전방식인 인산형 연료전지 발전시스템의 운용기술의 확립을 위하여 50 kW급 실증설비를 도입하고 주변기기를 설계, 설치하여 장기운전 특성시험을 실시하였다. 이 설비는 1993년 8월부터 1994년 11월 말까지 총 6,003시간의 운전기간 동안 187,190 kWh의 발전전력량을 기록하였고, 이 기간 동안의 발전운전시간 이용율은 63.01%, 평균출력은 33.5 kW였다. 설비의 운전특성에 있어서 정부하시 평균전압 및 전류는 각각 DC 130 V와 461 A였으며, 경시전압감소율은 1,000시간당 3.8 mV 정도로 나타났다. 설비의 기동·정지 특성중 기동시간은 냉간기동시 평균 4시간 50분, 난기동시 2시간 34분 정도가 소요되었고, 발전효율은 정부하시 전기효율이 37.46%, 배열이용효율은 43.8%로 전체효율 81.26%를 나타냈다. 환경 특성중 배가스중의 NOx 농도는 1 ppm 미만이었고, 소음도 63 dB 정도로 양호한 특성을 보여주었다. 운전기간 중 발생한 사고는 총23회로, 외부운전조건에 대한 민감성이 큰 것으로 나타났으며, PAFC 시스템의 상용화를 위해서는 스택수명 및 운전신뢰성을 향상시키는 것이 필요하다.

• Environmental and Resource Economics Review
• /
• v.6 no.1
• /
• pp.1-21
• /
• 1996

석유, 석탄 및 천연가스와 같은 일차화석연료(一次化石燃料)와 그 제품(製品)들의 사용에 따르는 이산화탄소배출량을 줄이는 방법의 하나로 거론되고 있는 탄소세와 에너지세의 부과가 2000년도 한국경제의 수출입(輸出入)에 미치는 영향을 평가하기 위하여 계산가능한 일반균형모형을 이용하여 분석하였다. 거시계량모형(巨視計量模型)에 의하여 예측된 2000년도 한국경제의 국내총생산(國內總生産)과 계산가능한 일반균형모형(一般均衡模型)의 이론적(理論的) 구조(構造)를 이용하여 2000년도 한국경제의 미시구조(微視購造)를 결정한 후 이로부터 계산된 이산화탄소배출량을 5%와 10% 줄이는 탄소세와 에너지세를 부과하였을 때의 경제적 효과를 계산하였다. 화석연료에 부과되는 탄소세와 에너지세는 수출입구조에 유사한 효과를 가져오는 것으로 평가되나 산업별로 약간의 차이를 가져오는 것으로 계산되었으며 이산화탄소감축율이 증가함에 띠라 국내총생산변화와 동등변동(同等變動)으로 측정된 경제적 비용이 점증하는 것으로 평가되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.335-342
• /
• 2012

Nowadays, automobile manufacturers are focusing on the reduction of exhaust-gas emissions because of the harmful effects on humans and the environment, such as global warming by greenhouse gases. Gasoline direct injection (GDI) combustion is a promising technology that can improve fuel economy significantly compared to conventional port fuel injection (PFI) gasoline engines. In the present study, ultra-lean combustion with an excess air ratio of over 2.0 is realized with a spray-guided-type GDI combustion system, so that the fuel consumption is improved by about 13%. The level of exhaust-gas emissions and the operation performance with the multiple injection strategy and exhaust-gas recirculation (EGR) are examined in comparison with the emission regulations and from the point of view of commercialization.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.489-494
• /
• 2017

This paper describes the combustion characteristics of aluminized paraffin fuel on the contents of micron-sized aluminum particles with nominal diameters of $8{\mu}m$. Aluminized paraffin fuels with mixture ratio of aluminum 0 wt%, 5 wt% and 10 wt% as fuel and GOx(Gaseous Oxygen) as oxidizer were used to perform the experiments. The experimental investigations were performed on the regression rate, the chamber pressure and the combustion efficiency. Increasing a content of micron-sized aluminum particles, the results of regression rate, chamber pressure and combustion efficiency show minor increase compared to those without particles.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.243-246
• /
• 2008

The combustion characteristic of solid fuel with chamber pressure were experimentally studied in hybrid combustion. This paper was experimental confirmed whether solid fuel affected not only oxidizer mass flux but also chamber pressure. Poly-Ethylene(PE) was used as fuel, GOX was used as oxidizer. Chamber pressure was controled by nozzle throat diameter 6mm and 9mm. In low oxidizer mass flux, solid fuel regression rate was affected not only oxidizer mass flux but also chamber pressure. As well, the regression rate increase as chamber pressure increase with same oxidizer mass flux.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.72-77
• /
• 2012

An alternative fuel is introduced as an environmentally friendly fuel in order to reduce the toxic emissions from conventional fossil fuels. In this study a bio-diesel fuel is produced and applied into the industrial diesel engine to understand the effect on the performance. The test conditions are loads of idle to maximum torque and engine speeds of 700 to 1900 rpm in bio-diesel blending percents of 0, 10, 20%. The results show that smoke and CO emissions are reduced while NOx in slightly increased, and the effects are rather clear in higher loads.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1736-1743
• /
• 1992

The combustion in the cylinder of spark ignition engine is completed after the delayed time that the liquid film fuel is vapourized as flowing into the combustion chamber. It is necessary to enhance the homogeneity of mixture and the combustion phenomenon in order to improve the heat efficiency and the emission characteristics of spark ignition engine. The main purpose of this paper is to manufacture a combustion analyzing system and examine closely the influence of non-uniformity due to the liquid film fuel flowing in the intake manifold on the combustion characteristics by using a 4 stroke multi- cylinder spark ignition engine. Moreover, with each cylinder, the interpretation of combustion characteristics by indicator diagram and the concentration of exhaust gas were investigated.