• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.64-70
• /
• 2007

Preparation and characterization of carbon-slurry fuel with high dispersion have been carried out. Carbon-slurry fuel was obtained by mixing Jet A-1 liquid fuel with appropriate carbon powders and additives. Dispersion of carbon in Jet A-1 was affected by various factors such as mixing temperature, characteristics of carbon powders, and type and amount of additives. Among these factors, the stability of the slurry fuel was most dependent on the type of additive. A variety of additives such as anionic, cationic, and nonionic additives was tested for the dispersion of carbon in Jet A-1. It was found that anionic additives based on sodium salts showed the highest dispersion of carbon-slurry fuels. The degree of dispersion could be monitored by measuring the luminosity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.429-431
• /
• 2011

The characteristics of hydro-reactive metal fuel(HRF) propellant on motor performances such as specific impulse and chamber temperature were analyzed by thermodynamic calculation methods. The thermal analysis and burning rate experiments of HRF propellants were also carried out for studying effects of metal fuels on combustion properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.19-20
• /
• 2014

연료전지 스택을 구성하는 핵심 부품 중 하나인 분리판(Bipolar plate)은 반응 연료인 수소와 산소를 분리하여 셀(cell)의 전면적에 균일하게 분배, 공급, 배기 및 전기화학반응에 의해 생성된 전류를 수집하며, 높은 가스밀폐성, 전기전도성 및 내식성이 요구된다. 분리판 소재로는 흑연, 고분자-탄소 복합체 및 금속 등이 사용되고 있으며, 이중 연료전지 스택의 부피, 무게 및 제조비용 감소를 위하여 금속분리판이 주목받고 있다. 그러나 금속분리판의 경우 연료전지 작동환경에서 부식반응에 의한 이온 용출로 인해 전극촉매나 고분자전해질막의 오염을 유발할 수 있다는 단점이 있어 최근 금속계 분리판의 코팅을 통하여 분리판의 내식특성 및 전기적 특성을 향상시키는 연구가 활발히 진행되고 있다.

• Journal of the Korean Society of Combustion
• /
• v.18 no.3
• /
• pp.68-74
• /
• 2013

가스터빈용 희박 예혼합 연소기 내부에 와류 발생기(vortex generator)를 장착하여 그에 따른 연료/공기혼합 및 NOx 배출 특성 변화를 조사하였다. 이를 위해 수치해석적 방법을 채택하여 연소기내 유동특성, 연료/공기 혼합도, 배기가스(NOx), 화염형상을 분석하였다. 와류 발생기를 장착한 경우, 연소기 내부에서 와류 발생기에 의한 나사산 형상으로 인해 와류가 형성되며 이는 연소기 전면부까지 유지되었다. 또한 연소기 내부 면적 차로 인해 압력섭동이 발생하였다. 이와 더불어 연소기 전면부 기준 상류지역의 연료와 공기의 혼합도가 증가됨으로서 연료 과농지역이 감소하게 되며 이로 인해 전반적인 NOx 발생량의 감소 효과를 볼 수 있었다. 화염 형상의 변화로부터 와류 발생기의 영향으로 선회수는 다소 감소할 것으로 예상되며, 이는 와류 발생기로 인한 유속의 반복적 증감에 의한 결과라고 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.140-140
• /
• 2012

최근에 고체산화물 연료전지(SOFC) 연료극 조건에서 우수한 상 안정성, 높은 혼합 전자/이온 전도도 및 황/탄소 저항성 때문에 yttrium-doped strontium titanium oxide (Y-doped SrTiO3)가 대체 연료극 재료로 주목을 받아 왔다. 그러나 Y-doped SrTiO3는 연료 산화에 대해서 기존의 Ni 계열 연료극보다 낮은 전기화학적 활성을 보이는 단점이 있다. 따라서, 효율적인 Y-doped SrTiO3 계열의 연료극 재료를 개발하기 위해서는 Y-doped SrTiO3의 연료극 특성 및 반응성의 이해가 필수적이다. 본 발표에서는 SOFC 연료극에서 수소 산화 반응성을 결정함에 있어 표면 산소 vacancy 형성 에너지의 역할에 대한 spin-polarized DFT (density functional theory) 결과를 발표할 예정이다. 표면 산소 vacancy 형성 에너지는 수소 산화 반응[H2+O (surface) ${\rightarrow}$ OH+OH ${\rightarrow}$ H2O+O (vacancy)]과 밀접한 관계가 있다는 것을 확인하였다. 또한 Y-doped SrTiO3의 표면을 3d-전이금속을(Sc, V, Cr, Fe, Co, Mn, Ni, Cu) 도핑함으로써 표면 산소 vacancy 형성 에너지를 제어할 수 있다는 것을 보였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.917-922
• /
• 2015

The goal of this study is to consider the application of alternative blended fuel to diesel engine. In this study, as the test fuels, we use a blended fuel mix of diesel and hydrogen peroxide. As the primary variable, we vary the mixing ratio of diesel and hydrogen peroxide in the experimental and numerical analysis. We perform an evaporative behavior characteristics analysis of the emulsified fuel using the Schlieren method. The numerical analysis was carried out based on results obtained from the experimental analysis using the commercial code(ANSYS CFX). Consequently, we found that the micro-explosion depends on the fraction of hydrogen peroxide, and we propose a numerical method for the quantitative evaporation analysis of emulsified fuel droplets using the calculation of the volume fraction in the oil domain.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2020

Following the advanced fuel cycle initiative (AFCI) promotions in the United States, the analytic proposition for global fuel cycle initiative (GFCI) has been investigated using dynamical simulations. The political and economic aspects are considered simultaneously due to the particular characteristics of the nuclear materials. The spent nuclear fuels (SNFs) are treated as the reprocessing by the nuclear non-proliferation treaty (NPT) exemption nations and the NPT excluded nations. Otherwise, the pyroprocessing and repository can be done without NPT restriction. In addition, the international trade is considered as the economic aspect where the energy production is a key issue of the GFCI. The dynamical simulations have been done until 2050. The result of the International Trade shows the gradually increasing shape. Additionally, the Nuclear Power Plant Operation shows the increasing by stepwise shape.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.566-575
• /
• 2011

Since LPG (Liquefied petroleum gas) fuel supply system has an advantage of low emission characteristics, many studies have been conducted. In spite of the advantage of LPG supply system, a higher vapor pressure and lower viscosity than diesel or gasoline fuel may cause unstable running of fuel pump by the deterioration in lubrication performance and chemical reaction with rubber parts than that of diesel and gasoline fuel. Therefore its physical properties can cause the deterioration of durability. In this research, we developed an external type LPG pump which has the advantage of the price competitiveness and the convenient maintenance for LPLi system. The experiments were carried out in order to assess characteristics of the external type fuel pump at different fuel composition and temperature. As a result, there aren't any differences between internal and external type pump performance. It is observed that the same level of efficiency was maintained for both pumps as flow rate was increased with higher fuel temperature and more contents of propane in the fuel. And the pressure difference in LPLi system is maintained at constant with the various fuel compositions and temperatures due to their own characteristics of fuel supply system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1736-1743
• /
• 1992

The combustion in the cylinder of spark ignition engine is completed after the delayed time that the liquid film fuel is vapourized as flowing into the combustion chamber. It is necessary to enhance the homogeneity of mixture and the combustion phenomenon in order to improve the heat efficiency and the emission characteristics of spark ignition engine. The main purpose of this paper is to manufacture a combustion analyzing system and examine closely the influence of non-uniformity due to the liquid film fuel flowing in the intake manifold on the combustion characteristics by using a 4 stroke multi- cylinder spark ignition engine. Moreover, with each cylinder, the interpretation of combustion characteristics by indicator diagram and the concentration of exhaust gas were investigated.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.33-38
• /
• 1996

영광 3,4호기용 원전연료에 사용되는 구조용 부품들 중에서 coil형 Holddown spring을 포함한 Upper end fitting assembly, Lower end fitting 등을 국내에서 제조할 수 있는 제조공정이 대우 정밀(주)에서 개발되었다. 이 공정에서 제조한 시제품들에 대하여 기계/구조적인 설계 관점에서 요구되는 제 조건들의 만족 여부를 구조강도 및 특성시험을 통하여 검증하였다. 검증시험 결과 주조제품인 Holddown plate 및 Lower end fitting은 주조물에서 요구되는 제기준과 기계/구조적인 설계 관건에서의 구조적 강도요건을 만족하고 있었고 coil형 Holddown spring의 특성이 설계 요구범위내에 있음이 확인됨으로서 향후 생산될 원전연료에는 금번에 개발된 공정으로 제조될 부품들이 사용필 수 있으리라 전망된다.