• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.59-66
• /
• 2010

Among the protected horticulture facilities in Korea, 99.2% are pipe-framed green houses and most of them are structurally vulnerable single-span type green houses. This study examined peak external pressure coefficient for the roof surface of a green house group composed of single-span and a multiple-span green houses. According to the results of the experiment, the distribution of peak external pressure coefficient was around 30% higher in the single-span greenhouse than in the multi-span ones. The external pressure coefficient for the roof surface of the vinyl house group was, in all of the three vinyl houses, was around 20%-30% higher than that for single-span greenhouses.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2002.04a
• /
• pp.110-114
• /
• 2002

단동형 비닐하우스는 연동형 비닐하우스에 비해 생력화 및 자동화가 미흡한 재배시설이다. 그러나 전국 시설면적 52,189 ha 중 90%이상이 단동형 비닐하우스로서 대부분 초기투자 부담이 적고 파이프를 이용하여 손쉽게 설치할 수 있는 단동형 비닐하우스를 선호하고 있는 실정이다. 단동형 비닐하우스는 각 지역의 특성에 적합한 고유형 시설로 발전하여 왔기 때문에 폭이 5-6m, 높이가 2-3.5m 정도인 대형 터널형태와 폭이 l0m 이상인 광폭형태 등 규격이 다양하게 설치되어있다. (중략)

• 농업기술회보
• /
• v.49 no.5
• /
• pp.32-33
• /
• 2012

국내 시설원예 재배면적은 1980년대 이후로 급격히 증가했고, 시설채소 재배면적의 99%는 비닐하우스가 차지한다. 이러한 비닐하우스 재배로 채소로 사계절 생산이 가능해졌고, 국민들은 하우스에서 생산된 채소를 어느 때나 구입할 수 있게 되었다. 이러한 시설채소 재배에 피복되는 연질 필름의 소재는 폴리에틸렌(PE) 필름, 에틸렌아세트산비닐(EVA) 필름, 폴리올레핀(PO) 필름 등으로 나누어지고, 이러한 열가성수지에 각종 첨가제를 추가해 보온성, 유적성, 내후성을 향상시킨다. 최근에는 연동하우스와 하우스 피복비용의 증가로 인해 내구성 있는 장기사용 필름에 관한 관심이 높아지고 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.725-728
• /
• 2009

This paper describes remote monitoring system for the various environments of a vinyl house, which was located in rural or outer of urban by use internet web connection system in a long distance office. We have constructed remote monitoring system by use a simple experimental model for the monitoring of various factors which need to operate common vinyl house. The experimental model includes temperature, humidity, smoke and infrared sensors for the measuring and AC 220V light bulb for the controlling in the USN system. Also, we have developed monitoring software by use NI Labview and communicate between PC and sensors through the DAQ-board, USN control board. We use CCD camera and grab board for the real time remote monitoring of wanted image in the house area. The computer server for remote connection is constructed in the local PC with Apache web server, PHP and MySQL ODBC. We construct internet communication system for the monitoring remotely the local environments of a vinyl house system.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.9
• /
• pp.5-12
• /
• 2018

The foundation of the multi-span greenhouse structures is designed with small shallow concrete foundation considering mainly the vertical load. However, recently, due to an abnormal climate such as strong wind, horizontal load and up-lift load over design strength are applied to the foundation, causing safety problems of the greenhouse foundation. In order to reasonably evaluate the safety of greenhouse foundations, rotational and pullout stiffness expressed by the ground-foundation interaction should be evaluated, which also affects the safety of the upper structural members. In this study, three representative basic foundation types were selected by classifying greenhouse standards in Korea according to the shape, and the horizontal loading tests and theoretical calculation were performed for each foundation type. As a result of the comparison and analysis of the test and calculation, it was found that rotational resistance of the foundation is different according to the ratio of the contact area between the foundation and ground when the conditions of the foundation - ground contact surface and the mechanical properties of the ground are the same.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1993.10a
• /
• pp.25-25
• /
• 1993

비닐하우스 면적은 계속 증가되면서 단위규모가 대형 연동화 추세이나, 내부의 환경조절은 대부분 수동으로 하고 있어 시간과 노력이 많이 소요되고 작물생육의 적정조건을 유지 못하는 경우가 빈번하다. 따라서, 시설원예 생산물의 품질과 가격경쟁력을 높이려고 하면 환경의 자동제어가 필수적이므로, 중앙집중식 컴퓨터 제어시스템을 완성하고, 비닐하우스에서 활용시험을 수행한 후 그 결과를 요약하면 다음과 같다. (중략)

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.3
• /
• pp.35-42
• /
• 2016

For the reason of economy, farmers and structural engineers prefer the vinyl house frame members that have the lightest cross sections. Therefore, in order to reach this aim, rod bracing system is the best method for multiple vinyl house frames. In this study, wire rods (tension members) are used to be bracing members in multiple vinyl house frames. The effects of additional wire rods in the frames are investigated by the variations of the bending moments, axial forces, displacements and combined stresses in the main frames that are reinforced by different shapes of rod bracing system. Vinyl house frames are usually made by steel pipe members and collapsed by the excessive wind and snow loads. Two kinds of bracing models are used for wind and snow loads separately in this study. The effective bracing models for each load are finally figured out.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.12
• /
• pp.3-10
• /
• 2018

Recently, severe damage to domestic horticultural structures is frequently observed due to extreme climate effects. To minimize the structures' damage, a study on the structural stability of multi-span vinyl greenhouses is needed. This paper presents to measure the rotational stiffness of different connectors to improve the design capacities of the specification. The paper investigated fourteen types of the different connectors, which was commonly used in the multi-span greenhouses, and three different types of the connectors predicted to be under moment-connection were selected: i) T-clamp, ii) U-clamp, iii) C-clamp. Static loading tests for three different connectors were performed to measure the rotational stiffness. Additionally, the boundary condition for the structural design was proposed based on the experimental results of the rotational stiffness. One of three connectors, C-clamp had larger rotational stiffness than other connectors, and the experimental results presented the three connectors had boundary conditions; i) T-clamp was pinned-connection, ii) U-clamp was semi-rigid connection, iii) C-clamp was semi-rigid connection.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.2
• /
• pp.23-29
• /
• 2010

Vinyl house is a simple agricultural structure that is installed economically and easily. In contrast, every year the farmers have spent a lot of money because of the collapse of this structure caused by the external forces such as strong wind and heavy snow. To prevent this damage due to frequent heavy snow and strong wind, it would be necessary to design it again. But getting rid of former vinyl house and reconstructing is unreasonable. It would be very economic if the former vinyl house is strengthened simply. This paper covers the investigation of the effect of the bracing systems that are additionally inserted inside the ordinary single frames as well as unbraced multiple frames that resisting only the strong wind load.

• Journal of Wetlands Research
• /
• v.18 no.4
• /
• pp.386-393
• /
• 2016

Agricultural ecosystem is recognized as a space for providing a variety of services, in addition to the food production that it originally encompassed, such as water purification, biological habitat, air purification, soil conservation, and landscape development. The construction of greenhouses in agricultural landscapes can cause deterioration of ecosystem services because of the increase of impermeable area and loss of biological habitats. This study aimed to compare insect diversity between different types of constructed greenhouses and paddy ecosystems. The target study area was selected by considering the distribution status of horticultural complexes and was classified as Single Vinyl Greenhouse, Multi Vinyl Greenhouse or Glass Greenhouse and they were compared with four paddies. The study locations were in Gu-Mi, Bu-Yeo, Ginje and Jin-Ju. A total of 2,333 individual insects belonging to 9 orders, 38 families, 76 genus, and 80 species were collected. The composition of orders was Hemiptera (22.37%), Coleoptera (18.42%), Hymenoptera (14.47%), Orthoptera (11.84%), and Diptera (10.53%). The average number of collected species were in the order Paddy (39.38 species) > Single Vinyl Greenhouse (35.50 species) > Multi Vinyl Greenhouse (22.50 species) > Glass Greenhouse (24.00 species). The Diversity Index (H') was Paddy (4.76) > Single Vinyl Greenhouse (4.57) > Multi Vinyl Greenhouse (4.12), and Glass Greenhouse (4.12). The Richness Index (RI) was Paddy (7.72) and Single Vinyl Greenhouse (7.03) > Multi Vinyl Greenhouse (4.99) and Glass Greenhouse (5.32). From our results, it can be seen that the biological diversity features of insects decreased when greenhouses are constructed.However, Single Vinyl Greenhouse is noted to promote insect diversity more than that by Multi Vinyl Greenhouse and Glass Greenhouse. Hence, when constructing greenhouses, it is necessary to consider insect habitat to conserve insect diversity.