• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.68-76
• /
• 2021

Storage racks have suffered huge losses due to earthquakes, but related research and regulations are relatively insufficient non-structural elements compared to the structural elements. In this study, we tried to experimentally analyze the behavioral characteristics of storage racks due to external force according to the fixing conditions of the column-foundations connection of storage racks. In general, the column-foundations connection of storage racks is installed according to the user's convenience without installation standards and regulations. For this reason, this study conducted a behavior analysis test on four full-scale storage racks with the condition of column-foundations connection of four typical storage racks. The behavior characteristics analysis test was performed by two-direction of the shake table with El-Centro seismic wave. To confirm the behavior characteristics according to the magnitude of the seismic load, 50% ~ 150% of the seismic waves were increased by 50% for each test. In addition, a resonance search test was conducted to confirm the natural frequency of each storage racks foundations fixing condition. Among the data obtained through the test, the displacement of the top layer and the permanent displacement after the test were compared for each condition to analyze the behavior characteristics of the column-foundations fixed conditions of the storage racks. As a result, the change of natural frequency was small in storage racks due to the change of the conditions of the foundations, and the behavior characteristics were changed due to the difference of the restoring force due to the change of the storage racks foundations condition rather than the influence of the natural frequency of the input load.

• 대한치과보철학회:학술대회논문집
• /
• 1998.11a
• /
• pp.44-44
• /
• 1998

• 대한치과보철학회:학술대회논문집
• /
• 2004.11a
• /
• pp.96-96
• /
• 2004

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.69-71
• /
• 2023

본 논문은 YOLO 기반 모델의 철도 시스템 내 선로 고정장치 탐지 성능을 비교하고 분석한다. 여기서 철도 시스템은 열차가 주행하기 위한 선로, 침목, 패스너 등의 구성요소를 포함한다. 침목은 지반과 직접적으로 연결되며, 선로를 지반 위에 안정적으로 지지하고 궤간을 정확하게 유지하는 역할을 한다. 또한, 패스너는 선로를 침목에 단단히 고정시키는 역할을 한다. 이러한 선로 고정장치의 부재는 인명 사고로 이어질 수 있어 지속적인 관리와 유지 보수가 필수적이다. 본 논문에서는 철도 시스템의 선로 고정장치 탐지를 위해 YOLO V5 및 V8 딥러닝 모델의 적용 가능성을 실험적으로 접근하며, 두 모델의 탐지 성능을 비교한다. 실험 결과, YOLO V8 및 V5 모델은 모두 뛰어난 성능을 보이는데, 특히 YOLO V8 모델이 더욱 우수한 성능을 보인다. 이로써 YOLO 알고리즘은 선로 고정장치 탐지에 적합하다는 것을 증명한다. 그러나 일부 False Positive Sample이 관측되었음을 확인하고, 이로부터 모델 성능의 개선이 필요하다는 결론을 도출하였다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.93-94
• /
• 2017

본 논문은 quasi P+MR 전압 제어를 활용한 삼상 인버터의 계통 동기화 방식을 제안한다. 계통동기화 과정 시 시스템이 고정자 좌표계하에서 제어 또는 모델링된다면 독립운전에서의 정전압 및 정주파수를 갖는 교류 지령 전압은 교류 계통 전압으로 즉각 대체되며 이때 인버터의 실제 전압과 계통 전압 간의 위상차에 기인하여 상당한 제어 오차가 발생할 수 있고 이는 심각한 전압 동특성 저하를 야기하기도 한다. 게다가 인버터 출력단에 비선형 부하가 연결될 경우 부하로부터 발생하는 고조파로 인해 이러한 전압 품질에 대한 문제가 더욱 증대된다. 본 논문에서는 독립 운전 모드에서의 전압제어를 위하여 이러한 비선형 부하의 고조파 영향을 고려한 고정자 좌표계 기반의 PR 제어를 사용한 매끄러운 계통 동기화 방식이 제안되었다. 제안된 매끄러운 계통 동기화 방식의 타당성은 기존의 고정자 좌표계 기반의 계통 동기화 방식과의 비교 사례연구를 기반으로 한 실험을 통해 입증된다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1065-1067
• /
• 2005

본 논문은 기존의 가스차단기와는 다른 차단동작을 가지는 새로운 형태의 가스차단기에 대한 특징을 검토한 것이다. 기존의 차단기에서 움직이던 가동부가 고정되고, 반대로 고정부이던 피스톤이 움직인다. 또한 기존 차단기의 고정부였던 고정 아크접점에 MDDM(Motor direct drive mechanism)을 채용하고, 반대편에 피스톤과 연결되는 소형 유압식 조작기를 설치함으로서 양방향 차단기(dual motion circuit breaker)를 구현하였다. 국내에서는 처음으로 MDDM을 실제 차단기에 적용한 사례로 판단되며, 기본 차단동자특성을 분석하여 향후 초고압 차단기에 적용할 수 있는 가능성을 검토하였다.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.8-13
• /
• 2013

The purpose of this paper is to study for fire example by fuel leakage in LPG Vehicle. At first example, the car was repaired the fuel line that was connected with pressure hose between fuel regulator and injector in engine. But the service man was not very tighten with regular torque. At a result, the gas leaked on hot parts of engine. It verified the production of fire by engine heat. At second example, when the repair man, after replacement the injector, inserted the injector in a assembling part of it, he didn't the transform condition of fixing part. Therefore, the tearing phenomenon of O ring producted the controlled leakage of fuel by the injector deflection. It found the fact that the fuel leaked with gap of O ring. At third example. the fuel-cut solenoid valve was lined with pressure regulator unit. But the service man didn't throughly certify the leaked work of connected parts after repaired it. As a result, it certified the fire by engine heating leaked liquefied petroleum gas. Therefore it have to minimize the fire production that the driver should do no problem to throughly manage the fuel system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.73-74
• /
• 2020

본 논문에서는 구현 장치에 연결된 다양한 인터페이스를 갖는 영상취득장치들 중에서 선택된 장치의 영상을 무선망을 통해 다수의 영상수신장치들에게 해당 영상을 전송하고, 원격으로 연결을 관리하는 영상송신시스템 디자인[1]의 하드웨어 구현 내용을 기술한다. 구현된 영상송신시스템 보드는 활용 요구 환경에 맞춰 영상취득을 위한 고정된 4개의 컴포지트 및 범용 USB 인터페이스, 무선 송수신 인터페이스, 전반적인 제어를 위한 CPU 모듈 등으로 구성된다. 원격의 영상수신장치들은 제안하는 구현된 송신시스템에 접속하여 개별채널을 확보하고 선택한 영상취득장치의 해당 영상을 직접 수신하고 해당 영상취득장치를 제어할 수 있다. 이를 위해서 연결된 다수의 외부 영상수신장치들과의 연결관리와 해당 영상취득장치의 제어 등과 같은 기능들을 제공하기 위한 하드웨어 보드를 구현하였다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.1-13
• /
• 2012

Short implants are used in parts which have anatomical structures like maxillary sinus, inferior alveolar nerve and limited alveolar height due to severe alveolar bone resorption. In these case, there are no need of additional bone augmentation so there are advantages like reduced entire treatment time, reduced patient's discomfort and protection of important anatomical structures. The aim of this study is, in implants whose length is less than 10mm, to analyze the impact of implant length, diameter, location of implant placement, presence of bone graft, presence of prosthesis splinting on survival rates and marginal bone resorption. The samples used in this study were 227 implants, less than 10mm, placed in 137 patients in Wonkwang university dental hospital implant center. From dental charts the information about implant length, diameter, location of implant placement, presence of bone graft, presence of prosthesis splinting were obtained. Emago advanced v5.6(Oral diagnostic systems, Amsterdam, The Netherlands)program was used to measure the amount of marginal bone resorption. Out of total 227 implants, resulting in 96.5 % of survival rate. There was a tendency toward higher failure rates for the maxilla and bone graft site. No significant difference in marginal bone resorption was found associated with length of implants(p>0.05) and neither with the diameter of implants. Among the risk factors examined, more failure rates of short implants can be attributed to poor bone quality in the maxilla and presence of bone graft. At implants under 10mm, length, diameter, location of implant placement, bone graft and splinting of prosthesis didn't affect marginal bone loss.