• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.103-118
• /
• 2012

A distributed model can easily obtain discharge at any grids spatially distributed in a watershed. But if there are subwatersheds which have various characteristics in a watershed, it is needed to apply a model calibrated at each subwatershed to obtain reliable simulation results for each subwatershed. In this study, a multi-site calibration module that can calibrate a distributed model at each subwatershed using observed flow data was developed. Methods to select multi-site calibration parameters, to apply subwatershed parameters, and to set subwatershed network information are suggested. Classes to implement multi-site calibration technique are designed and a GUI was developed, and procedures for runoff modelling using subwatershed parameters were established. Multi-site calibration module was applied to Sunsan watershed($977km^2$) of Nakdong river basin. Application results showed that the multi-site calibration technique could be applied effectively to model the calibration for each subwatershed, and the simulation results of subwatershed were improved by the application of multi-site calibration.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.231-231
• /
• 2012

격자 기반의 분포형 모형은 격자로 분할된 유역의 임의 지점에 대해서 유출량을 계산할 수 있는 장점이 있다. 분포형 모형을 이용한 기존의 유출해석에서는 유역의 최하류 지점을 대상으로 모형을 보정하는 단일지점 모형보정 기술이 적용되어 왔다. 단일지점을 대상으로 모형을 보정할 경우, 보정 대상 지점에서 멀리 떨어져 있는 격자 일수록 유출해석 결과와 관측 유량의 오차가 커질 수 있다. 본 연구에서는 소유역으로 분할된 유역에 대해서 소유역별로 모형을 보정할 수 있는 다지점 보정기술을 이용해서 유출해석을 수행하였다. 유역내 여러 지점에 대해서 모형을 보정할 경우, 소유역 및 최하류 지점에 대한 유출해석 결과를 향상시킬 수 있다. 이러한 다지점 보정기술은 유역내 여러 지점에 대한 유출량을 계산할 때 효과적으로 적용될 수 있으며, 분포형 모형을 이용한 홍수예보시스템 구축시, 대상 유역내 다수의 지점에 대해 실시간 유출해석을 손쉽게 수행하는 데 적용될 수 있을 것이다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.111-123
• /
• 2007

Unlike the conventional reverse time migration method which is implemented by simply extrapolating wavefield in reverse time, this paper presents a derivation of another reverse time migration operator as the exact adjoint of the presumed forward wavefield extrapolation operator. The adjoint operator is obtained by formulating the forward time extrapolation operator in an explicit matrix equation form and then taking the adjoint to this matrix equation followed by determining the corresponding operator. The reverse time migration operator as the exact adjoint to the implied forward operator can be used not only as a migration algorithm but also as an adjoint operator which is required in the imaging through an inversion such as least-squares migration.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.191-202
• /
• 2011

Reserve-time migration (RTM) using a two-way wave equation is one of the most accurate migration techniques. RTM has been conducted by assuming that subsurface media are isotropic. However, anisotropic media are commonly encountered in reality. Conventional isotropic RTM may yield inaccurate results for anisotropic media. In this paper, we develop RTM algorithms for vertical transversely isotropic media (VTI) and tilted transversely isotropic media (TTI). For this, the pseudo-acoustic wave equations are used. The modeling algorithms are based on the high-order finite-difference method (FDM). The RTM algorithms are composed using the cross-correlation imaging condition or the imaging condition using virtual sources. By applying the developed RTM algorithms to the Hess VTI and BP TTI models, we could obtain better images than those obtained by the conventional isotropic RTM.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.322-324
• /
• 2001

본 논문에서는 한글 문자열의 기울기 보정 방법을 제안한다. 기존 방법들이 대부분 영문위주의 보정 방법으로 한글에 적용하는데는 많은 문제가 있다. 특히, 한글에 존재하는 대각선 획으로 인한 역 보정으로 문자열을 심하게 손상시키는 경우가 빈번하다. 제안하는 방법은 한글 문자열에 존재하는 대각선 획들을 기울기 보정 과정에서 효과적으로 제외시킴으로써 기존 방법에서 나타나는 역보정의 문제를 해결하였다. 임의의 필기 자들에 의해 필기된 우편봉투 주소문자열 500개를 이용하여 실험한 결과 제안하는 방법이 역보정을 크게 줄여 기존의 방법보다 좋은 보정 결과를 얻을 수 있었다.

• Geophysics and Geophysical Exploration
• /
• v.3 no.2
• /
• pp.70-75
• /
• 2000

In the seismic migration, Kirchhoff and reverse time migration are used in general. In the reverse time migration using wave equation, two-way and one-way wave equation are applied. The approach of one-way wave equation uses approximately computed downward continuation extrapolator, it need tess amounts of calculations and core memory in compared to that of two-way wave equation. In this paper, we applied one-way wave equation to pre-stack reverse time migration. In the frequency-space domain, forward propagation of source wavefield and back propagration of measured wavefield were executed by using monochromatic one-way wave equation, and zero-lag cross correlation of two wavefield resulted in the image of subsurface. We had implemented prestack migration on a massively parallel processors (MPP) CRAYT3E, and knew the algorithm studied here is efficiently applied to the prestck migration due to its suitability for parallelization.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.102-107
• /
• 2006

Recently, rapid developments in computer hardware have enabled reverse-time migration to be applied to various production imaging problems. As a wave-equation technique using the two-way wave equation, reverse-time migration can handle not only multi-path arrivals but also steep dips and overturned reflections. However, reverse-time migration causes unwanted artefacts, which arise from the two-way characteristics of the hyperbolic wave equation. Zero-lag cross correlation with diving waves, head waves and back-scattered waves result in spurious artefacts. These strong artefacts have the common feature that the correlating forward and backward wavefields propagate in almost the opposite direction to each other at each correlation point. This is because the ray paths of the forward and backward wavefields are almost identical. In this paper, we present several tactics to avoid artefacts in shot-domain reverse-time migration. Simple muting of a shot gather before migration, or wavefront migration which performs correlation only within a time window following first arriving travel times, are useful in suppressing artefacts. Calculating the wave propagation direction from the Poynting vector gives rise to a new imaging condition, which can eliminate strong artefacts and can produce common image gathers in the reflection angle domain.

• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.153-159
• /
• 2003

Using reciprocity theorem, one direction aperture of seismogram can be extended to full aperture seismogram. Modified seismogram is applied to reverse time migration only to acquire improved migration image. In this paper, we tested reverse time migration with the Marmousi velocity data to examine efficiency of modified seismogram. And linearly increasing velocity model is selected and examined for a case where velocity data is insufficient. When true velocity is applied, using modified seismogram enhances the reverse time migration image more than using original seismogram. In the case of using linearly increasing velocity model, migration image is distorted. So low frequency source is brought in migration process. Reverse time migration image with low frequency source and linearly increasing velocity model is improved when modified seismogram is used. From the result of study, seismogram modification by reciprocity theorem is useful and migration image can be enhanced.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1991.07a
• /
• pp.88-101
• /
• 1991

충주댐 및 소양강댐 유역에 대해 현재 한국수자원공사에서 개발 사용되고 있는 저류함수 유출모형에 최적화 기법을 적용하여 모형을 효율적으로 자동보정 하기위함이 본 연구의 목적이다. 최적화 기법으로는 다양한 조건하에서도 해의 안정성이 Gradient-Based 방법보다 우수한 직접 탐색법(Direct Search Method)의 하나인 Pattern-Search법으로 선정하였으며 목적함수로는 산정된 유출과 관측치의 편차의 제곱에 대한 누계치로 정의하였다. 합성유입량(Synthetic Inflow)을 이용한 민감도 분석에 의해 매개변수 5개(유역 저류상수 및 지체시간, 포화우량, 하도의 지체시간)를 결정변수로 선정하였다. 또한 실시간 모형의 보정을 위하여 최적화 모형의 수렴조건을 분석한 결과 P-S 법의 증분 감소횟수 2회가 합리적으로 나타났다. 본 모형을 충주댐 및 소양강댐의 과거 홍수사상에 대해 적용하였으며 댐지점에서 전체유역을 일괄 보정하는 방법과 댐 상류 수위국을 기준으로 나눈 중유역별로 일괄 보정하는 방법을 채택하여 분석하였다. 실시간 보정된 모형의 예측기능을 시험한 결과 상당한 오차발생의 여지가 충분하며 중유역별 매개변수의 보정은 대유역 일괄보정에 비해 예측에 따른 오차를 줄일 수 있는 방법의 하나이다. 또한 최적화 기법에 의한 매개변수의 자동 보정은 시행착오에 의한 수동보정의 경우보다 시간 및 노력면에서 효율적이며 보다 신뢰성 있는 보정을 실시 할 수 있다.

• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.349-358
• /
• 2010

For imaging complex subsurface structures such as salt dome, faults, thrust belt, and folds, seismic prestack reverse-time migration in depth domain is widely used, which is performed by the cross-correlation of shot-domain wavefield extrapolation with receiver-domain wavefield extrapolation. We apply the prestack reverse-time migration, which had been developed at KIGAM, to the seismic field data set of Block 5 in Jeju basin of Korea continental shelf in order to improve subsurface syncline stratigraphy image of the deep structures under the shot point 8km at the surface. We performed basic data processing for improving S/N ratio in the shot gathers, and constructed a velocity model from stack velocity which was calculated by the iterative velocity spectrum. The syncline structure of the stack image appears as disconnected interfaces due to the diffractions, but the result of the prestack migration shows that the syncline image is improved as seismic energy is concentrated on the geological interfaces.