• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.15-26
• /
• 2012

Recently, due to applicability increase of vector data based digital map for geographic information and evolution of geographic measurement techniques, large volumed GIS(geographic information service) services having high resolution and large volumed data are flowing actively. This paper proposed an efficient vector map compression technique using the SEC(spatial energy compaction) based on classified bins for the vector map having 1cm detail and hugh range. We encoded polygon and polyline that are the main objects to express geographic information in the vector map. First, we classified 3 types of bins and allocated the number of bits for each bin using adjacencies among the objects. and then about each classified bin, energy compaction and or pre-defined VLC(variable length coding) were performed according to characteristics of classified bins. Finally, for same target map, while a vector simplification algorithm had about 13%, compression ratio in 1m resolution we confirmed our method having more than 80% encoding efficiencies about original vector map in the 1cm resolution. Also it has not only higher compression ratio but also faster computing speed than present SEC based compression algorithm through experimental results. Moreover, our algorithm presented much more high performances about accuracy and computing power than vector approximation algorithm on same data volume sizes.

• Journal of Environmental Policy
• /
• v.7 no.2
• /
• pp.1-32
• /
• 2008

This study examined the income distribution effect of the environmental taxes in the energy sector by applying the Urban Family Survey and the Household Income and Expenditure Survey to the Kakwani index. The results analyzed are as follows: first, taxes of the non-transportation energy sector show progressive tax schemes, while those of transportation energy show regressive ones. Second, we calculated the scenario-specific progressivity index on basis of the existing energy price structure. Contrary to the previous works claimed to be regressive, the progressivity in scenario I got higher than before, except for the congestion taxes. Also, the index by the total sum of taxes in scenario II showed just a little bit higher progressive tax system. In scenario III, both the value added tax and the total sum of taxes have a little regressive structure, but the indexes in the environmental taxes, heat capacity taxes, and those which the environmental tax and the congestion tax and heat capacity taxes are summed up, are in general progressive. Third, subsidizing the tax revenues raised from the environmental taxes to the poor classes by a simulation approach shows more progressive as expected, implying the more subsidy the higher the progressivity index. As a result, it is said that the implementation of the environmental taxes has no negative impact on the income distribution, and the subsidy of the tax revenue raised from it to the poor can make the income inequality improve.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.149-149
• /
• 2011

청정 에너지원으로 높은 잠재력을 가지고 있는 가스하이드레이트는 상업적 기술개발이 미확보된 상태임에도, 우리나라에서 부존이 직접적으로 확인되었기 때문에 에너지원으로서 그 중요성이 부각되고 있다. 현재 전세계적으로 가스하이드레이트 개발 및 생산에 관한 연구가 활발히 진행되고 있으며 이에 대한 기초자료로서 가스하이드레이트가 함유된 퇴적층의 물성자료가 필요하다. 이에 따라 본 연구에서는 입도 분포별 총 5가지의 미고결 시료를 대상으로 투과도, p파속도, 전기비저항 측정을 수행하였다. 연구에 사용된 미고결 시료는 Hama#5($774{\mu}m$), #6($485{\mu}m$), #7($258{\mu}m$), #8($106{\mu}m$) 4가지와 Hama#6과 Hama#7을 1:1($371{\mu}m$)로 혼합하여 사용하였다. 실험에 사용된 장비는 가스하이드레이트를 인공적으로 생성시키기 위해 퇴적층을 모사할 수 있는 고압셀과 자료획득장비, 유체 주입장비, 온도 유지장비이다. 또한 투과도 측정에는 차압계, 전기비저항 측정에 RLC meter, p파속도 측정에 음파 송수신장비를 사용하여 각각의 물성을 측정하였다. 실험과정을 단계별로 요약하면 먼저 시료를 고압셀에 충진한 뒤 주입된 물의 양으로부터 공극률을 측정하고, 절대 투수계수를 측정하였다. 그 후, 메탄가스를 주입하여 퇴적층 내 수포화도(water saturation)를 잔류상태(irreducible saturation)로 유지시키고 메탄가스를 추가적으로 주입하여 원하는 압력까지 가압한 뒤 온도를 $1^{\circ}C$로 낮추었다. 가스하이드레이트의 생성은 급격한 압력강하로부터 알 수 있다. 최종적으로 가스하이트레이트가 함유된 퇴적층의 상대 투수계수를 측정하기 위해 메탄가스를 주입하였고 각각의 측정장비를 통해 전기비저항 및 p파 속도를 측정하였다.$V_g$, $V_h$, $V_w$, $V_ss$는 각각 가스의 부피, 하이드레이트의 부피, 물의 부피, 모래의 부피이다. 또한 수포화도, $S_w=\frac{V_w}{V_v}$이며 하이드레이트 포화도, $S_h=\frac{V_w}{V_v}$, 가스 포화도, $S_g=\frac{V_g}{V_v}$로 정의된다. 본 실험의 결과 투과도는 가스의 부피비, $\frac{V_g}{V}=nS_g$에 민감한 반응을 보였으며, 비저항은 공극수의 부피비, $\frac{V_w}{V}=nS_w$에 민감한 반응을 보였다. 또한 p파 속도는 고체의 부피비, $\frac{V_s+V_h}{V}=n(1-S_h)$에 민감한 반응을 보였다. 이러한 실험의 결과는 가스하이드레이트 개발, 생산 연구에 있어 기초 물성자료로 활용되는데 도움을 줄 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.101-109
• /
• 2014

It is an essential element for the establishment of image processing related systems to find the exact contour from the image of an arbitrary object. In particular, if a vision system is established to inspect the products in the automated production process, it is very important to detect the contours for standardized shapes such lines and curves. In this paper, we propose a prototype adaptive dynamic contour model, p-Snake with improved contour extraction algorithms by adding the prototype energy. The proposed method is to find the initial contour by applying the existing Snake algorithm after Sobel operation is performed for prototype analysis. Next, the final contour of the object is detected by analyzing prototypes such as lines and circles, defining prototype energy and using it as an additional energy item in the existing Snake function on the basis of information on initial contour. We performed experiments on 340 images obtained by using an environment that duplicated the background of an industrial site. It was found that even if objects are not clearly distinguished from the background due to noise and lighting or the edges being insufficiently visible in the images, the contour can be extracted. In addition, in the case of similarity which is the measure representing how much it matches the prototype, the prototype similarity of contour extracted from the proposed p-ACM is superior to that of ACM by 9.85%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.59-68
• /
• 2004

Thanks to the development of microelectromechanical systems(MEMS), wireless communication technology and microsensor technology, it was Possible to manufacture a very small and low costdata acquisition node with sensing function, processing function, wireless communication function and battery. Thus sensor networks begin to be prevailed. The sensor network is a spontaneous system which sets up automatically routing paths and transmits asignificant data to the destination. Sensor nodes requires low-power operation because most of them use a battery as operating power. Sensor nodes transmit a sensing data to the destination. Moreover, they play a router. In fact, because the later consumes more energy than the former, the low-power routing is very important. Sensor networks don't have a routing standard unlike general wireless Ad-hoc networks. So This paper proposes a low-power routing method for anting to sensor networks. It is based on AODV and adapts a method to drop probably RREQ depending on remaining power. We examined it through simulations. From simulation results, we could confirm to reduce power consumption about $10-20\%$ and distribute equally power consumption among nodes.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.160-164
• /
• 2008

The Characterization of $MgB_2$ Thin Film by Slow Positron Annihilation Spectroscopy Enhance signal-to-noise ratio, slow positron coincidence Doppler Broadening method has been applied to study of characteristics of $MgB_2$ superconductor film, which were performed at 30 K and 50 K sample temperature near Tc of it. In this investigation the numerical analysis of the Doppler spectra was employed to the determination of the shape parameter, S, defined as the ratio between the amount of counts in a central portion of the spectrum and the total counts of whole spectrum. The S-parameter values were increased then decreased while the positron implantation energies were increasing, that indicated the diffusion into the samples. The S-parameters of the anisotropic 1 ${\mu}m$ $MgB_2$ thin film which were implanted by positrons at 10 keV are 0.567 at 30 K and 0.570 at 50 K. It is believed that the positrons annihilate with normal-electrons instead of super-electrons in the $MgB_2$ superconductor.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.281-291
• /
• 2012

Recently, global economy has recovered and aspects of the renewable energy industry in the global competition is more fierce, the new growth engines of the major countries, including the United States and China, industry promotion policy as being deployed. Major advanced countries and Korea also invested a lot of money to wind power development as a part of renewable energy development and promoting the construction of wind power generation. The global wind power generation market is expected to further increase the scale to about 70 billion US dollars, thus, Korea as well as the installation of domestic wind power overseas actively considering. This study uses input-output analysis to estimate the role of wind power generation sector exports national economy. More specifically, this study shows what national economy effect of production-inducing effect, value-added inducing effect, and employment-inducing effect are explored with demand-driven moel. After define wind power generation sector what small sized of Input-Output table 168 sectors among 11 sectors, this study pays particular and close attention to wind power generation sector by taking the sector as exogenous specification and then investigating economic impacts of it. The wind power generation exportation case of overseas 100 billion won, production-inducing effect, value-added inducing effect, and employment-inducing effect are 205 billion won, 68 billion won and 1,054 persons, respectively. These quantitative information can be usefully utilized in the policy-making for the industrialization of wind power generation exports.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.483-487
• /
• 2012

In 1895, the discovered X-ray is used for not only in this field of medicine wide but also field. The detection of radiation after, people realized the risk of the radiation exposured recommended the principle about the protection of radiation by the part of the effort for lowering the radiation exposure. In this recommendation, all unnecessary radiation exposure have to be prevented by All doses include the protection of radiation, general idea of applicable two kinds of that it has to low maintain. Presently, in the General X-ray room of the clinical, the lead (Pb) was used for the shielding, However, because it had the problem of the lead poisoning which is fatal in the human body, the alternatives was showed. and Among them, the material that it is the tungsten was presented. in this research, the absorbed spectrum according to the thickness in the continuous X-ray energy of the tungsten which is not harmful to the human body through the Monte Carlo simulation, tried to compare with the absorbed spectrum of the lead (Pb). The tungsten confirmed that simulation presumption than result lead in the whole domain that absorbed probability was higher and it is considered that tungsten shows the absorbed efficiency higher than the lead in particularly, 70 keV ~ 90 keV and the tungsten is more useful to the X-ray energy cover of the high energy diagnostic area.

• Archives of design research
• /
• v.15 no.1
• /
• pp.181-190
• /
• 2002

Every object's patterns is the balancing-relationship between the object's inner-energy and outer-stress. To see this as a balancing-relationship between an organism, inner-energy would be the occurrence of thermodynamic entropy which is for its existing maintenance. Outer-stress would be the friction that comes from the surrounding environment. Namely, we can see that object's figure exists in the balance between an extort to survive and fiction that disturb it. However, it is fourth that these figures are consisted of a curve and curved-surface which is not a straight line. So, it is impossible to find a figure made up of straight lines and surfaces in the existing object's world. It's true that we have regarded only a curve as the beautiful. Here, we have presented that in a curve, there exists an important function which protect our survival from the ancient humanity. And by closely observing the function in a physical dynamic-pattern sight, we've searched what is important in the design's origin that handle curve-patterns. Of course it would be more reasonable to analyze it in the standpoint of Mathematics, Chemistry, or Biology, and synthesize the points. However, due to the limitation of the researchability, we will concern about the physical structure in the design. Deficient details will be replenished through the study between educational systems. As a result, we have confirmed that, devoting the curve's physical structure-phenomenon (occurred in nature) to the design, is more beautiful in our eyes, too.

• Journal of Internet Computing and Services
• /
• v.9 no.4
• /
• pp.11-20
• /
• 2008

IEEE 802.16e has adopted sleep mode to minimize energy consumption of mobile nodes with high speed mobility. If the Base Station (BS) has no data to be sent to a Mobile Subscriber Station (MSS) at the instant of ending sleep window of the MSS, the MSS increases its sleep window interval by double until the window interval reaches to the maximum sleep window interval. Thus, during the operation of sleep mode, MSS repeatedly performs switch on/off action until there exist frames to be received from BS. The switch on/off operation significantly consumes energy of MSS. To effectively deal with the energy of the MSS, this paper proposes an algorithm which decides the minimum sleep window interval that will be used in next sleep mode based on the current sleep window interval. We evaluate the performance of IEEE 802.16e sleep mode algorithm and our proposed algorithm in terms of energy consumption and blocking probability. Compared with the current sleep mode algorithm used in IEEE 802.16e, the proposed algorithm decreases the energy consumption by about 30% without increasing blocking probability.