• Microbiology and Biotechnology Letters
• /
• v.20 no.1
• /
• pp.40-45
• /
• 1992

Acidic nucleotidase from Asfiergilius nlger has been partially purified by Sepharose CL-6B gel filtration and DEAE-Sephacel ion exchange chromatography. The optimum pH and temperature for the enzyme reaction with 5'-AMP or 3'-AMP as a substrate were 4.5 and 55%, respectively. However, the optimum temperature became 70% when p-nitrophenyl phosphate was used as a substrate. The enzyme was stable at acidic pH. The enzyme activity was not affected by addition of various nucleotides, nucleosides and inorganic phosphates. Ferric, aluminium, vanadate and molybdate ions inhibited the enzyme activity dramatically. In kinetic studies, $K_m$), values for 3'-AMP, 5'-AMP and p-nitrophenyl phosphate were 1.39 mM, 1.5 mM and 5.77 mM, respectively. The substrate efficiency ($V_{max}/K_m$) shows 3'-AMP is the prefered substrate for the enzyme among tested substrates.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.480-481
• /
• 2008

본 논문은 U-Health 장치 인터페이싱을 위하여 표면 근전도를 이용한 손동작 특징들의 모델링 알고리즘에 대하여 제안하였다. 지금까지 연구에서는 표면 근전도를 측정하기 위하여 전완의 여러 부위에서 신호를 측정하였지만 휴대용 U-Health 장치들의 특성상 센서를 부착 할 수 있는 공간이 한정 되어있기 때문에 한 채널당 손동작의 인식률이 높아야하고 착용하기 편한 위치예서 신호를 측정해야 한다. 따라서 본 논문에서는 손목 근처의 수지신근(finger extensor)과 소지신근(extensor digiti minimi) 사이에 생체신호 센서를 부착하는 것을 제안했으며, 적은 수의 센서에서도 손동작에 따른 충분한 근전도 패턴을 구분해 내기 위하여 3차원 공간상에서 시간과 스케일 정보를 분석할 수 있는 다해상도 웨이블릿을 이용하였다. 정밀한 근전도 분석을 위하여 모 웨이블릿을 신경 신호의 활동전위(action potential)와 가장 유사한 형태를 가지고 있는 Daubechies 4 (db4)로 선택하였고, 이렇게 웨이블릿 분석을 통하여 1차원 신호를 16레벨로 나누어 각 신호에 대하여 에너지를 200 ms 간격으로 평가함으로서 7가지 손동작 인식을 위한 패턴 모델을 구하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04c
• /
• pp.75-79
• /
• 2008

In this paper, we measured the activation energy of the Bisphenol A type Epoxy resin (DGEBA)-Jeffamine system according to an irradiation. We put the mixed solutions to the silicon mold after mixing both DGEBA(216g) and Jeffamine(93.9g), curing agent of amine system. The mixed solutions were cured in the atmosphere during 24hours after finishing the first curing during 4hours in the vacuum oven under $80^{\circ}C$. The mixed solutions were cured in the atmosphere during 24hours after finishing the second curing during 12hours in the vacuum oven under $60^{\circ}C$ again. Prepared samples were irradiated to the dose rate of 8kGy/hr with 500kGy, 700kGy, 1000kGy, 1500kGy, 2000kGy, 2500kGy. Experimental results indicated activation energy of the samples reduced as the irradiation dose increased because of the peroxides of the Epoxy created by the oxidation and the radiation.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.4
• /
• pp.462-467
• /
• 1997

The DIS process(dewatering and impregnation soaking process) are using for dewatering of food materials at room temperature. And the DIS process are resulted in diffusion process as well as dewatering phenomena. During the DIS process, plasmolysis or cytorrhysis was happened by according to solute size. A tissue state of food material was very important variables for movement of water or solute, and running conditions are important for dewatering and impregnation. And models for DIS process were fundamentally given by Fick's law at unsteady state or mass balance. For example, Bicompartmental Model was given for quantification of water loss and solid gain.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.801-806
• /
• 2013

Spiny lebbeid shrimp Lebbeus groenlandicus larvae were reared in the laboratory to estimate the energy budget from the zoeal to the post-larval stage. Energy expended by larvae on growth and respiration was determined from values for feeding, growth, molting, and metabolism. We calculated that 16.22 J were used for growth throughout all larval stages. Energy loss during molting was estimated as 1.03 J, and energy used for respiration was estimated as 1.31 J. Energy taken in by feeding was estimated as 77.16 J, while the sum of energies expended in excretion and egestion was 58.61 J. Larvae were estimated to assimilate 24.6% of ingested food as energy and to use ~85% of the assimilated energy for somatic growth. Gross growth efficiency ($K_1$) and net growth efficiency ($K_2$) were shown to be ~22% and 93%, respectively. Maintenance costs of respiration were estimated as ~9.7% of assimilated energy.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.807-812
• /
• 2013

The energy budget of the larvae of pandalid shrimp, Pandalopsis japonica, reared in the laboratory from zoea to post-larva was investigated. Energy used during the growth of the shrimp larvae was calculated daily for feeding, growth, molting, and metabolism. The total energy used was 16.2 J for the entire larval stage. Molting energy loss was estimated at a total 1.03 J. Energy used for respiration was estimated at a total of 1.85 J. The intake energy by feeding reached a total of 77.69 J. The total sum of energies used by excretion and egestion was 58.61 J. Larvae assimilated 24.57% of ingested food and used 84.91% for somatic growth. The gross growth efficiency ($K_1$) was 22.19% for the entire larval stage, and the net growth efficiency ($K_2$) was 90.31%. Maintenance costs were estimated at 9.69% of assimilated energy for the entire larval stage.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.967-974
• /
• 1994

We studied the cure kinetics of the DGEBA(Diglycidyl ether of bisphenol A)/MDA(4, 4' -methylene dianiline)/MN(Malononitrile)/HQ(Hydroquinone) system by Barrett method and Integral method with dynamic runs of differential scanning calorimetry(DSC). Kinetic parameters such as activation energy and pre-exponential factor were obtained and reaction order was estimated roughly supposing that present system was adjusted to nth order reaction. The MN(Malononitrile) was introduced as a chain extender and HQ(Hydroquinone) as a reactive accelerator or catalyst.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.667-672
• /
• 1997

Thermal behavior of high capacity Nickel/Metal hybride battery in analyzed using the NISA software which is based on the three dimensional finite element method. Differential energy balance equation is used for the conduction heat transfer of the battery, while convective heat transfer equation is used for the interface between the battery and air. Heat generation rate and convective heat transfer coefficient are tested as variables to investigate thermal behavior, and the generalized equation for maximum temperature inside the battery is developed. The abrupt rise of the battery temperature due to the quick charge or discharge can be prevented from the use of metallic cooling fin. In addition, temperature augmentation of the battery is negligible when the low thermal conductive and thin insulating material is used outside of the battery case.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.301-306
• /
• 2015

X-ray can be applied to obtain a projection image of an object. It is not easy to obtain an high quality image for the object composed of low and high density materials. For the object with large difference in density, it is possible to realize high contrast image using images of low and high tube voltages and image processing. The plastic and metalic parts of the electronic components can be imaged by the dual energy technique which use low and high tube voltages and by processing pixel-by-pixel using visual C++. The contrast-enhanced image can be used to detect and observe defects within the electronic components.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.53-61
• /
• 2011

Edge notched A16061-T6 aluminum was repaired with a GFRP composite patch as a function of the number of stacking, Damage progress of specimen for tension load has been monitored by acoustic emission(AE), AE energy rate, hit rate, amplitude, waveform and 1st peak frequency distribution were analyzed. Fracture processes were classified into Al cracking, Fiber breakage, Resin cracking and Delamination. Displacement of a specimen can be divided into Region I, II and ill according to acoustic emission characteristics. Region II where the patch itself was actually fractured was focused on to clarify the AE characteristics difference for the number of stacking.