• Journal of the Korean Geophysical Society
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2005

Defects of dam body which can be induced in seepage or leakage procedure can directly affect dam safety. Therefore, a proper inspection method should be carried out in the first place to find out their positions and sizes. After that, some reinforcement works such as grouting and the corresponding assessment could be taken in a proper way. The dam(center core type earth dam) issued in this study has been in need for intensive diagnosis and reinforcement work, because a lot of slumps similar to cracks, seepage and some boggy area have been observed on the downstream slope. High resolution seismic reflection method was performed on the crest profile twice before and after grouting work(Aug. 2001 and Nov. 2004) aimed at the dam inspection and the assessment of grouting efficiency as well. To enhance the data resolution, P-beam energy radiation technique which can reduce the surface waves and hence to reinforce the reflection events was used. Strong reflection events were recognized in the stack section before grouting work, It seems that the events would be caused by e.g. horizontal cracks with a considerable aperture. Meanwhile such strong reflection events were not observed in the section after grouting. That is, the grouting work was dear able to reinforce the defects of dam body. Hence, the section showed an well arranged picture of dam inner structure. In this sense, seismic reflection method will be a desirable technique for dam inspection and for monitoring dam inner structure as well.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.143-151
• /
• 1997

As the pulse heights from a NaI(Tl) detector vary with the temperature of the measuring environment a significant change in temperature may affect the energy calibration of the spectrometer. The auto-adjustment of the channel corresponding to a pulse heights can be achieved by introducing an external reference source to compensate the temperature dependency of pulse heights, but unfavorable increases of the Compton continuum are caused due to the external source. In this study, the total absorption peaks dominant in the typical environmental gamma spectrum-239 keV from $^{212}Pb$, 351 keV from $^{214}Pb$, 1460 keV from $^{40}K$ and 2614 keV from $^{208}Tl$ for examples - were used as reference in the correction of energy calibration. With these peaks, the program to calibrate the energy of the s spectrum was developed using Microsoft Visual Basic language. The program developed here was applied to the environmental spectra measured at intervals of 30 minutes in the temperature range of from $-20^{\circ}C$ to $10^{\circ}C$ to demonstrate the validity and applicability. As a result of the test, the correction scheme appeared to be effective in the temperature changes encountered in the usual environment.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.185-202
• /
• 2012

This study analyzed the achievement characteristics of 21st Century Frontier R&D Program depending on the subject of study, type, period in order to provide necessary data required during planning and execution of the large scale R&D projects. 21st Century Frontier R&D Program is a representative national R&D project that has been supported for a decade. The research achievements were analyzed for researchers who participated in each four projects completed in 2010 and 2011 among 16 R&D projects of 21st Century Frontier R&D Program promoted by Ministry of Education, Science and Technology. The research is summarized as follows. First, the achievements varied depending on the main agent such as universities, R&D institutions, and industries. The achievement of universities includes significantly larger publications than those of R&D institutions and industries. Second, the rate of overseas patent application and registration were higher in industries significantly than those in other research agents. Third, the achievements differed depending on research type such as basic, applied, and development researches, and the development researches exhibited significantly higher achievements in domestic patent application and registration, overseas patent application, and technology transfer. Fourth, in terms of the research period, long-term projects show significantly larger number of domestic patent applications than those from short-term projects. Fifth, when achievements like the publication and overseas patent application were classified in such fields as bio, nano, and energy environment R&D, bio and nano fields showed higher achievement than the energy environment field. This research could empirically confirm that the achievement characteristics of large scale and long-term government support R&D projects vary for each research properties.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.35-41
• /
• 2012

In this paper, we analyze the current submarine cooling system and study control algorithms for cooling system. Cooling system are installed in the submarine propulsion motor to protect the motor from high-temperature by iron loss and copper loss. The cooling system control the sea water and fresh water pump RPM to keep the motor temperature stable by external environment and motor RPM holding time. The cooling system simulation program is made for checking the cooling performance, and simulation is performed with various control strategy. The results with proposed cooling algorithm is shown to improve the thermal stability and efficiency of cooling system.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.62-67
• /
• 2013

This paper introduces an effective methodology for reliability-based design optimization of electromagnetic products, where a performance measure approach is adopted to accurately assess probabilistic constrains. Two design problems consisting of a loudspeaker and a superconducting magnetic energy storage system are considered. The efficiency of the proposed method in evaluating the failure probability of performances during the optimization process are compared with the existing method based on the reliability index approach. Moreover, in term of the accuracy of probability failure values, optimized design results are examined with reference values obtained from the Monte Carlo simulation.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.145-151
• /
• 1997

The R&D investment of power industry has significant influences on the social welfare as well as national economy. It is necessary to analyze how efficient the R&D investment has been performed. The objective of this study is to verify the efficiency of the R&D investment in the domestic power industry. A formula was introduced to by calculate the appropriate amount of R&D investment of monopolistic industry under the regulations which are determined by the proportion of R&D elasticity and price elasticity. It has resulted that there would be no economy of scale as the sales of electricity increases at the same rate of the increasing cost. The R&D investment in the present electricity industry has been performed inefficiently by showing the negative impact on price-cost margin of the intensity of R&D investment, which is the extent of R&D investment to reinforce economy of scale.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.95-106
• /
• 1999

A numerical model is represented to calculate the wave fields such as the reflected waves, the transmitted waves and the depth-averaged velocities over submerged breakwaters for the normally incident wave trains of nonlinear mono-chromatic wave and solitary wave. The finite amplitude shallow water equations with the effects of bottom friction are solved numerically in time domain using an explicit dissipative Lax-Wendroff finite difference method. The numerical model is verified by comparisons with the other numerical results and the measured data. It is found that the submerged breakwater may be more useful for protecting the energies of monochromatic waves rather than solitary waves. Finally, the armor stability on submerged breakwater is indirectly analyzed using the hydrodynamic characteristics of flow fields.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.2
• /
• pp.63-75
• /
• 2017

In offshore environment, an accurate estimation of a wave-structure interaction has been an important issue for safe and cost effective design of fixed and floating offshore structures exposed to a harsh environment. In this study, a wave-structure interaction around a circular column was investigated with regular waves. To simulate 3D two-phase flow, open source computational fluid dynamics libraries, called OpenFOAM, were used. Wave generation and absorption in the wave tank were activated by the relaxation method, which implemented in a source term. To validate the numerical methods, generated Stokes 2nd-order wave profiles were compared with the analytic solution with deep water condition. From the validation test, grid longitudinal and vertical sizes for wave length and amplitude were selected. The simulated wave run-up and wave loads on the circular column were studied and compared with existing experimental data.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.29-37
• /
• 2024

This study investigates the thermal conductivity and density of expanded polystyrene insulation materials collected from buildings under going energy retrofit projects. Due to the absence of initial thermal conductivity data, determining precise long-term patterns was challenging. Analysis based on design documents revealed that expanded polystyrene insulation maintained consistent performance over ten years. Notably, the thermal conductivity measurements of insulation samples of the same grade and age varied significantly. Additionally, the insulation density was found to be substantially below the standard specified in the design documents. The results of the experiment indicate that performance management during both construction and operation phases is lacking. It is crucial to apply building commissioning, which involves performance verification throughout the building's life cycle, to properly evaluate building energy performance improvements, such as building energy retrofit projects.

• Journal of the Korea Society for Simulation
• /
• v.16 no.2
• /
• pp.27-35
• /
• 2007

When sensor networks are deployed in open environments, all the sensor nodes are vulnerable to physical threat. An attacker can physically capture a sensor node and obtain the security information including the keys used for data authentication. An attacker can easily inject false reports into the sensor network through the compromised node. False report can lead to not only false alarms but also the depletion of limited energy resource in battery powered sensor networks. To overcome this threat, Fan Ye et al. proposed that statistical on-route filtering scheme(SEF) can do verify the false report during the forwarding process. In this scheme, the choice of a security threshold value is important since it trades off detection power and energy, where security threshold value is the number of message authentication code for verification of false report. In this paper, we propose a fuzzy rule-based system for security threshold determination that can conserve energy, while it provides sufficient detection power in the SEF based sensor networks. The fuzzy logic determines a security threshold by considering the probability of a node having non-compromised keys, the number of compromised partitions, and the remaining energy of nodes. The fuzzy based threshold value can conserve energy, while it provides sufficient detection power.