• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.655-663
• /
• 2016

Increasing green house gas and it consequent climate change problems are discussed as a global issue. Accordingly, future local green house gas emission will increase up to 40% of the entire local green house gas emission and therefore, efforts to reduce the emission in construction industry is urgently required. Therefore, in this study, heating energy demand was analyzed by using the EnergyPlus simulation according to wood material finishes configuration. EnergyPlus has the entry for a variety of buildings and heating, ventilation, air conditioning (HAVC) system components, in particular buildings, air conditioning systems, and performs simultaneous integrated calculated through the feedback between the heat source unit, a verification program according to the ASHRAE Standard 140-2007 to be. The climate data for the simulation we used the data IWEC in Incheon and Gwangju provided by EnergyPlus. The analysis of simulation model was farm and fishing house standard design drawings: 2012, presented at the Korea Rural Community Corporation. The results of simulation of central region and southern region were effected by wood products of simulation model into the interior finish, exterior finish, windows, wooden structure. Also, it was confirmed that the reduced heating energy demand.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.175-182
• /
• 2014

The use of solar energy among renewable energy tends to increase because of infinity and cleanness of resources. Even though the consumption rate of solar energy in our country is still low, however, in recent years, the research for solar energy have been widely conducted due to policy support of government. This study was performed to make the system of performance test for solar collector and to investigate thermal efficiency for solar collector with thermosyphon tube-type. As a result, in case of indoors measurement using halogen lamp, thermal efficiency for solar collector with thermosyphon tube-type was increased about 15~22% after 120 minutes compared with that of solar collector with double evacuated tube-type. In addition, in case of outdoors measurement, thermal efficiency of thermosyphon tube-type was showed maximum about 46% higher than double evacuated tube-type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.911-917
• /
• 2008

In this paper. we introduce and investigate new architectures and comprehensive design methodologies of intelligent dimming converter and evaluate the proposed model and the system through a series of numeric experiments. The intelligent dimming converter is developed by using the regression polynomial fuzzy model. In this paper, we put emphasis on the design of electronic ballast based on intelligent dimming converter and the energy saving according to the day-light and the user setting by applying the intelligent model to a fluorescent lamp. We show the superiority of the proposed intelligent dimming converter through the evaluation of performance with conventional electronic ballast by applying the intelligent model to real systems.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.119-125
• /
• 2014

This study evaluated the environmental impacts of a soil washing (SW) process, especially, we compared the on-site and off-site remediation of TPH-contaminated soil using green and sustainable remediation (GSR) tool. To assess relative contribution of each stage on environmental footprints in the entire soil washing process, we classified the process into four major stages: site foundation (stage I), excavation (stage II), separation & washing (stage III), and wastewater treatment (stage IV). In on-site SW process, the relative contribution of $CO_2$ emissions and energy consumption were 87.1% and 80.4%, respectively in stage I, and in off-site SW process, the relative contribution of $CO_2$ emissions and energy consumption were 82.7% and 80.5%, respectively in stage II. In conclusion, the major factor contributing environmental impact in the SW process were consumable materials including steel and stainless steel for washing equipment in on-site treatment and fuel consumption for transportation of soil in off-site treatment.

• Nuclear industry
• /
• v.27 no.4 s.290
• /
• pp.46-50
• /
• 2007

고리 1호기는 한국에서 최초로 규제 기관에 계속운전을 신청한 원전이다. 2007년 6월에 설계 수명 기간 만료가 되는 고리 1호기는 규제 기관으로부터 계속운전(Continued Operation)에 대한 안전성 심사를 받고 있다. 한수원은 고리 1호기 계속운전 승인을 금년 12월에 받기 위해 최선을 다하고 있으며 지역 주민의 사회적 수용성 확보를 위해 노력중이다. 고리 1호기의 계속운전 기간 동안 안전성을 평가하고 정리한 안전성평가보고서를 한수원은 2006년 6월에 정부에 제출하였다. 고리 1호기는 웨스팅하우스의 2루프 가압경수로이다. 이와 동일한 원전인 일본의 미하마 1,2호기와 겐까이1호기가 계속운전중이며, 미국의 기네이와 포인트 비치 1,2호기가 계속운전 승인을 받았다. 제출한 안전성평가보고서에 대해 한국원자력안전기술원이 심사중이며, 해외 원전과 같이 계속운전을 할 수 있을 것으로 예상하고 있다. 또한 계속운전을 위한 사회적 수용성(Public Acceptance) 확보는 설비의 철저한 안전성 확보 및 지역 주민의 공감대 형성을 통해서 이루어질 것이다. 설계 수명 이후 원자력발전소를 계속 운전하는 것은 이미 선진국에서 시행되고 있다. 2007년 3월 기준으로 미국에서 48기가 운영 허가 갱신 승인을 받았고, 영국은 8기, 일본은 12기가 계속운전중이다. 고리 1호기 성능 지표를 개선시키기 위해서 한수원은 증기발생기, 저압 터빈, 원자로 냉각재 펌프 내장품, 주변압기, 주발전기 등을 교체하였으며, 수명관리 연구, 주기적안전성 평가, 환경 영향 평가를 수행하였다. 2005년 9월에는 미국의 운영 허가 갱신 제도를 참조하여 원자력법이 개정되었다. 이에 한수원은 개정된 원자력법에 맞추어 주기적 안전성평가, 주요 기기에 대한 수명 평가 및 방사능 환경 영향평가를 하였다. 이 세가지 보고서들로 구성된 안전성평가보고서를 2006년 6월에 규제 기관에 제출하였다. 계속운전은 한국을 비롯하여 부존 자원이 부족한 국가들에게는 에너지 자원의 효율적 활용 및 온실 가스 배출을 고려할 때 반드시 필요한 것이다.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.50-63
• /
• 2017

Safety culture degradation signs in nuclear power plants with complex and diverse systems can lead to their equipments performance deterioration. If these signs are neglected, they become potential causes of accidents. Therefore, it is necessary to monitor safety culture in the point of view of organization and management as well as to evaluate safety performance of nuclear power plants. Therefore, This paper suggested a methodology to evaluate safety culture weakness contributing the accidents' root causes in the case accidents occur at nuclear power plants. After reviewing methodologies using at domestic and international industry, the methodology suitable for domestic nuclear power plants was determined.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.190.1-190.1
• /
• 2010

풍력자원평가를 위해 풍력단지 개발대상지의 국지풍황 대표지점에 설치하는 풍황탑(met-tower 또는 풍황마스트; met-mast)은 모노폴(monopole), 삼각단면 트러스 또는 사각단면 트러스 구조를 갖는다. 풍향계 및 풍속계는 이러한 지지구조물에 의한 풍속의 교란 또는 차폐영향을 최소화하기 위하여 긴 붐(boom)의 끝단에 설치되지만 계측기가 풍황탑의 직후방 후류영역에 놓이게 될 경우 차폐영향을 완전히 피하기는 어렵다. 저자들의 선행연구에 따르면 풍황탑 차폐영향은 평균풍력밀도의 경우 2.5% 이상의 오차를 유발할 수 있으므로 풍력자원평가 시 필히 고려되어야 할 불확도 요인인 것이다. 이에 한국에너지기술연구원에서는 풍황탑 주위의 대기유동장을 전산유동해석을 이용하여 차폐영향의 정도를 정량적으로 수치모사함으로써 이를 보정하는 기술을 개발한 바 있다(현재 특허심사 중). KIER-$ShadeFree^{TM}$는 이 특허기술을 프로그램화 한 것으로, 시범적으로 다수의 풍황탑 풍력자원 측정자료에 적용하여 상당한 보정효과에 의한 풍력자원평가의 정확도 향상효과를 볼 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.74-80
• /
• 2008

The feasibility study into the development of turbine spinners, which start up the turbo-pump, has been carried out and the design requirements and parameters ranges have been presented. Turbine spinners use the solid propellant as such composite propellant based AN compound with high energy plasticizers, coolants, and phase stabilizer which relieves a sensible volume change due to the phase transformation of AN near room temperature. Propellants which have a homing rate of $0.2{\sim}0.3\;mm/s$ and pressure exponent ranged from 0.3 to 0.6, showed stable burn-out in the standard motor tests. Both the magnitude of ignition energy and its thermal transfer mechanism have been proved to have a tangible effect on the ignition of the pyre starter, and the results of this study showed that a flame temperature of 1400K would be quite adequate to get a stable ignition for the AN composite propellant.

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.297-302
• /
• 2017

In this study, the generation of photoneutrons between the 10 MV FF mode and the FFF mode was evaluated and the amount of photoneutrons generated by the 10 MV and 15 MV energy changes in the FFF mode was evaluated. The generated neutrons were evaluated at 13 measurement points and the KTEPC was used to collect the generated neutrons. 10 MV FF mode was measured at 10 MV FF mode and FFF mode at all measurement points. In the superior direction, 0.455mSv and 0.152mSv were the largest, and more than 33% optical neutron was generated in FF. 10 MV in FFF mode, 15 MV in 15 MV, and 0.402 mSv in the direction of Superior, and 6.9% in the direction.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.1
• /
• pp.100-109
• /
• 1999

Purpose: Preamplifier and amplifier are very important parts for developing a portable counting or imaging gamma probe. They can be used for analyzing pulses containing energy and position information for the emitted radiations. The commercial Nuclear Instrument Modules (NIMs) can be used for processing these pulses. However, it may be improper to use NIMs in developing a portable gamma probe, because of its size and high price. The purpose of this study was to develop both preamplifier and amplifier and measure their performance characteristics. Materials and Methods: The preamplifier and amplifier were designed as a charge sensitive device and a capacitor resistor-resistor capacitor (CR-RC) electronic circuit, respectively, and they were mounted on a print circuit board (PCB). We acquired and analyzed energy spectra for Tc-99m and Cs-137 using both PCB and NIMs. Multichannel analyzer (Accuspec/A, Canberra Industries Inc., Meriden Connecticut, U.S.A) and scintillation detectors (EP-047(Bicron Saint-Gobain/Norton Industrial EP-047 (Ceramics Co., Ohio, U.S.A) with $2"{\times}2"$ NaI(T1) crystal and R1535 (Hamamatsu Photonics K.K., Electron Tube Center, Shizuoka-ken, Japan) with $1"{\times}1"$ NaI(T1) crystal were used for acquiring the energy spectra. Results: Using PCB, energy resolutions of EP-047 detectors for Tc-99m and Cs-137 were 12.92% and 5.01%, respectively, whereas R1535 showed 13.75% and 5.19% of energy resolution. Using the NIM devices, energy resolutions of EP-047 detector for Tc-99m and Cs-137 were measured as 14.6% and 7.58%, respectively. However, reliable energy spectrum of R1535 detector could not be acquired, since its photomultiplier tube (PMT) requires a specific type of preamplifier. Conclusion: We developed a special preamplifier and amplifier suitable for a small sized gamma probe that showed good energy resolutions independent of PMT types. The results indicate that the PCB can be used in developing both counting and imaging gamma probe.