• Journal of The Korea Institute of Healthcare Architecture
• /
• v.30 no.3
• /
• pp.7-16
• /
• 2024

Purpose: Medical center has consumed the energy about twice the average value of building types. So, many countries have tried sustainability and energy reduction for building types through eco friendly certificate. This study investigate the eco friendly building certificate and energy performance certificate focusing in UK and Korea, and search the characteristics of status and services of certificates. Methods: BREEAM openbook and EPC open data have been studied in UK, and green building performance certificate and EPC data in korea have been analyzed. Results: UK has eco friendly building certificate focusing on healthcare, and EPC shows the standard, benchmark reference value, so lead to the CO₂ emission reduction. Primary health center and hospital show the higher value due to the dwelling unit. like a patient bed. Korea doesn't have green building certificate yet on healthcare, and EPC shows not the reference data, but the primary energy consumption. Korean cases just like in UK, clinic, public health, and outpatient center show the lower value compared to medical center, nursing home and general hospital. Implications: In Korea, it is needed for energy efficiency to have reference data information like a standard and benchmarking value for new design and construction.

• (The) Research of the performance art and culture
• /
• no.25
• /
• pp.57-89
• /
• 2012

The performers preparing for a performance usually experience the process of mental transference, contacting with text (drama) for the first time. It is movement from their everyday life to space in the play, when they try to break the wall between cast and themselves. The transference happens actually at the physical space, such as a dressing room, wing, (place just before appearing at a stage), and a stage (place to contact with audience). Performers keep moving among each psychological and physical space repeatedly, until the performance finishes totally. The transference means moving to each space to another, and the mental borderline means the point of mental change the performers experience during the process of transference. The mental borderline can be guessed to exist through mental aspects the performers feel when they move from each space to another. The most typical example, that shows performer's mental borderline well, is stage fright shown as tension, or anxiety among the variety of aspects. According to a research, the most performers experience that kind of mental aspect just before appearing at a stage. The study on it is already referred by my article.' A Study on Korean Performer's Stage Fright. This study aims at examining the relationship among psychological and physical space the performers experience, mental borderline when transferring and penetrating those spaces, and performer's mental change First, the concept of mental borderline is to be understood totally with preceded research. And the space the performers experience and mental borderline at transference are to be reorganized. Secondly, the area of transference in the process of performance is to be reclassified into physical and mental space. Third, analyzing the actual case of performers experiencing the mental borderline, the diversified use should be searched to make use of mental borderline as a positive element. The psychological symptoms, performers experience in the performance, can have positive consequence beside negative one. The tension occurring at the area of borderline is positive, and it can be the actual borderline for the performers. It will be researched how the performers change at the mental borderline, the state of mind is maintained, and they perform in an overall performance, through the study on the relationship between the transference and the mental borderline. And the stress and concentration caused by stage fright, and shyness will be confirmed, and the positive element of a stage, which is used as various defense mechanism.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.255-268
• /
• 2018

Subsea tunnel can be highly vulnerable to seawater intrusion due to unexpected high-water pressure during construction. An artificial ground freezing (AGF) will be a promising alternative to conventional reinforcement or water-tightening technology under high-water pressure conditions. In this study, the freezing energy and required time was calculated by the theoretical model of the heat flow to estimate the total amount of refrigerant required for the artificial ground freezing. A lab-scale freezing chamber was devised to investigate changes in the thermal and mechanical properties of sandy soil corresponding to the variation of the salinity and water pressure. The freezing time was measured with different conditions during the chamber freezing tests. Its validity was evaluated by comparing the results between the freezing chamber experiment and the numerical analysis. In particular, the freezing time showed no significant difference between the theoretical model and the numerical analysis. The amount of refrigerant for artificial ground freezing was estimated from the numerical analysis and the freezing efficiency obtained from the chamber test. In addition, the energy ratio for maintaining frozen status was calculated by the proposed formula. It is believed that the energy ratio for freezing will depend on the depth of rock cover in the subsea tunnels and the water temperature on the sea floor.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.1
• /
• pp.161-182
• /
• 2018

We carried out a series of linear cutting machine tests to assess the cutting performance of a pick cutter in sedimentary rock. The specimens were Linyi sandstone from China and Concrete (rock-like material, conglomerate). Using the small scaled LCM system, we estimated the cutter force and specific energy under different cutting conditions. The cutter forces (cutting and normal) increased with penetration depth and cutter spacing in two rock types, and it was affected by the strength of specimens. On the other hand, the ratio of the peak cutter force to the mean cutter force was influenced by cutting characteristic and composition of rock rather than rock strength. The cutting coefficient was affected by the friction characteristic between rock and pick cutter rather than the cutting conditions. Therefore, the optimal cutting angle can be determined by considering of cutting coefficient and resultant force of pick cutter. The optimum cutting condition was determined from the relationship between the specific energy and cutting condition. For two specimens, the optimum s/p ratio was found to be two to four, and the specific energy decreased with the penetration depth. The result from this study can be used as background database to understand the cutting mechanism of a pick cutter, also it can be used to design for the mechanical excavator.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.47-59
• /
• 2017

This study aims to assess offshore wind energy resources around Jeju Island using the InVEST Offshore Wind model. First the wind power density around the coast of Jeju was calculated using reanalysis data from the Korean Local Analysis and Prediction System (KLAPS). Next, the net present value (NPV) for the 168MW offshore wind farm scenario was evaluated taking into consideration factors like costs (turbine development, submarine cable installation, maintenance), turbine operation efficiency, and a 20year operation period. It was determined that there are high wind resources along both the western and eastern coasts of Jeju Island, with high wind power densities of $400W/m^2$ calculated. To visually evaluate the NPV around Jeju Island, a classification of five grades was employed, and results showed that the western sea area has a high NPV, with wind power resources over $400W/m^2$. The InVEST Offshore Wind model can quickly provide optimal spatial information for various wind farm scenarios. The InVEST model can be used in combination with results of marine ecosystem service evaluation to design an efficient marine spatial plan around Jeju Island.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.3
• /
• pp.35-50
• /
• 2007

In a data centric sensor network, a sensor node to store data is determined by the measured data value of each sensor node. Therefore, if the same data occur frequently, the energy of the sensor node to store the data is exhausted quickly due to the concentration of loads. And if the sensor network is extended, the communication cost for storing data and processing queries is increased, since the length of the routing path for them is usually in the distance. However, the existing researches that generally focus on the efficient management of data storing can not solve these problems efficiently. In this paper, we propose a NUNS(Non-Uniform Network Split) method that can distribute loads of sensor nodes and decrease the communication cost caused by the sensor network extension. By dividing the sensor network into non-uniform partitions that have the minimum difference in the number of sensor nodes and the splitted area size and storing the data which is occurred in a partition at the sensor nodes within the partition, the NUNS can distribute loads of sensor nodes and decrease the communication cost efficiently. In addition, by dividing each partition into non-uniform zones that have the minimum difference in the splitted area size as many as the number of the sensor nodes in the partition and allocating each of them as the processing area of each sensor node, the NUNS can protect a specific sensor node from the load concentration and decrease the unnecessary routing cost.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.149-156
• /
• 2012

Support vector machines (SVMs) are well known for their pattern recognition capability, but proper care should be taken to alleviate their inherent implementation cost resulting from high computational intensity and memory requirement, especially in embedded systems where only limited resources are available. Since the memory requirement determined by the dimensionality and the number of support vectors is generally too high for a cache in embedded systems to accomodate, frequent accesses to the main memory occur inevitably whenever the cache is not able to provide requested data to the processor. These frequent accesses to the main memory result in overall performance degradation and increased energy consumption because a memory access typically takes longer and consumes more energy than a cache access or a register access. In this paper, we propose a technique that reduces the number of main memory accesses by optimizing the data access pattern of the SVM-based classifier in such a way that the temporal locality of the accesses increases, fully utilizing data loaded into the processor chip. With experiments, we confirm the enhancement made by the proposed technique in terms of the number of memory accesses, overall execution time, and energy consumption.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.33-39
• /
• 2016

With recent advances in sensor technology, CMOS-based semiconductor devices and networking protocol, the areas for application of wireless sensor networks greatly expanded and diversified. Such diversification of uses for wireless sensor networks creates a multitude of beneficial possibilities for several industries. In the application of wireless sensor networks for monitoring systems' data transmission process from the sensor node to the sink node, transmission through multi-hop paths have been used. Also mobile sink techniques have been applied. However, high energy costs, unbalanced energy consumption of nodes and time gaps between the measured data values and the actual value have created a need for advancement. Therefore, this thesis proposes a new model which alleviates these problems. To reduce the communication costs due to frequent data exchange, a State Prediction Model has been developed to predict the situation of the peripheral node using a geographic autocorrelation of sensor nodes constituting the wireless sensor networks. Also, a Risk Analysis Model has developed to quickly alert the monitoring system of any fatal abnormalities when they occur. Simulation results have shown, in the case of applying the State Prediction Model, errors were smaller than otherwise. When the Risk Analysis Model is applied, the data transfer latency was reduced. The results of this study are expected to be utilized in any efficient communication method for wireless sensor network monitoring systems where all nodes are able to identify their geographic location.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.270-285
• /
• 2018

The behavior of wave-induced pore water pressure inside the rubble mound and seabed, and the resultant structure failure are investigated, which are used in design of the composite breakwater representing the coastal and harbor structures. Numerical simulation techniques have been widely used to assess these behaviors through linear and nonlinear methods in many researches. While the combination of strongly nonlinear analytical method and turbulence model have not been applied yet, which can simulate these characteristics more accurately. In this study, olaFlow model considering the wave-breaking and turbulent phenomena is applied through VOF and LES methods, which gives more exact solution by using the multiphase flow analytical method. The verification of olaFlow model is demonstrated by comparing the experimental and numerical results for the interactions of regular waves-seabed and regular waves-composite breakwater-seabed. The characteristics of the spatial distributions of horizontal wave pressure, excess-pore-water pressure, mean flow velocity and mean vorticity on the upright caisson, and inside the rubble mound and seabed are discussed, as well as the relation between the mean distribution of vorticity size and mean turbulent kinetic energy. And the stability of composite breakwater are also discussed.